Navien Boiler Control Panel Replacement and Part

Navien Boiler Control Panel Replacement and OEM Part Supply in Vancouver & Greater British Columbia

When your Navien boiler stops working properly, one of the first components technicians will examine is the control panel, also referred to as the PCB (Printed Circuit Board) or controller board. For homeowners and contractors across Vancouver, Burnaby, Surrey, Richmond, and the rest of British Columbia, this internal part is not only critical to the operation of the boiler—but also one of the most commonly requested replacements.

At ROMA Heating & Cooling, we’ve built a strong reputation as one of the leading HVAC and hydronic heating service providers in BC. As a Navien-authorized service contractor, we offer fast diagnostics, verified OEM parts, and expert-level installation of replacement boiler components—backed by 25+ years of regional experience.

Whether you’re dealing with a Navien NCB-240 combi boiler, a Navien tankless water heater, or another model from Navien’s product line, this comprehensive guide will walk you through:

• What the control panel does
• Signs of failure
• Replacement options
• Installation guidance
• OEM vs aftermarket parts
• Where to buy in British Columbia
• ROMA’s part sourcing & delivery services
• Local technician response times
• Full Navien diagnostics and support

Understanding the Navien Boiler Control Panel

The control panel in a Navien boiler acts as the central brain of the entire system. Without it, your unit will not function. It processes inputs from thermostats, sensors, flame detectors, and external demand signals to manage heating cycles, pump speeds, ignition, safety shutoffs, and even onboard diagnostics.

Key Functions of the Navien Control Board:

• Ignites the burner safely when heat or hot water is required
• Monitors flame stability and shuts off the gas valve if necessary
• Reads and processes internal/external temperature sensors
• Interfaces with thermostats, zone valves, and circulating pumps
• Controls fan speed, water flow rate, and gas pressure
• Displays error codes for easy diagnostics
• Enables high-efficiency operation via condensing algorithms

In short: if the control panel fails, your boiler will likely stop working or operate erratically.

Why Control Boards Fail: Common Causes in BC Homes and Buildings

While Navien boilers are engineered for durability, control panels can still fail due to several environmental or usage-based factors—especially in British Columbia’s unique coastal climate.

Common Reasons for Control Panel Malfunction:

• Moisture exposure from poorly ventilated utility rooms
• Voltage surges or power outages from BC Hydro disruptions
• Condensate overflow due to blocked drainage
• Wiring issues during HVAC renovations or retrofits
• Thermal stress over years of continuous operation
• Pest infiltration, especially in crawlspaces or garages
• Incorrect installation or third-party modifications

This is why it’s critical to use licensed HVAC technicians for diagnostics and replacement—especially with high-performance systems like Navien.

Symptoms of a Failing or Failed Navien Control Panel

Not sure if your control board is the problem? Below are common signs our technicians encounter across Metro Vancouver and the Fraser Valley when the control board is compromised:

System Symptoms:

• The unit powers on but doesn’t ignite the burner
• Random shutdowns despite working thermostats
• Repeated fault codes with no clear cause
• The LCD display flickers, is blank, or is unresponsive
• You hear clicks or relay noises but no heating starts
• Boiler restarts intermittently
• Hot water or space heating is inconsistent or absent
• Water circulation stops despite pump functioning

Error Codes You Might See:

• E003 / Ignition Failure
• E012 / Flame Loss
• E046 / Communication Failure
• E060 / Control Board Communication Error
• E109 / PCB Fault Detected

These symptoms often lead homeowners to request a replacement part—or at least a full inspection of the board and related components.

Can You Replace the Navien Control Panel Yourself?

While technically possible, control board replacement is a complex and sensitive task best left to trained and certified HVAC professionals. Here’s why:

• The control panel is connected to multiple voltage and sensor lines
• Improper handling can cause static discharge damage
• Firmware updates or board pairing may be required
• Safety mechanisms can be disabled if installed incorrectly
• Warranty may be voided without proof of licensed technician service

ROMA Heating & Cooling offers control board replacement with full installation, diagnostics, and safety checks, all performed by Red Seal-certified gas fitters and hydronics specialists.

We Stock and Source OEM Navien Control Panels Across BC

As part of our commitment to rapid service and repair, ROMA maintains a live inventory of commonly replaced Navien parts, including:

• Internal control boards
• Display panels
• Sensor modules
• Blower assemblies
• Flow sensors
• Ignition rods and flame sensors
• Condensate neutralizers
• Water pressure sensors

We stock parts at our main warehouse near Vancouver, and offer real-time availability checks by phone or email. If your part is not in stock, we can:

• Source it directly from Navien Canada
• Order from authorized distributors with 1-3 day delivery
• Offer express shipping or technician dispatch with the part

How to Order a Replacement Navien Control Panel from ROMA

Ordering a replacement control board (or any Navien part) is simple with ROMA Heating & Cooling:

Step 1: Contact Us

Reach out via:

• Phone: (604) 704-0300
• Email: info@romaheating.ca
• Live chat on our website during business hours

Provide your boiler model number, symptoms, and preferred service option (pickup, shipping, or installation).

Step 2: Stock Check & Confirmation

We’ll confirm the exact part required, check our stock levels, and advise you on:

• Compatibility with older vs. newer models
• Estimated delivery time if out of stock
• Whether your unit is under manufacturer warranty

Step 3: Transparent Quote

You’ll receive a clear breakdown of:

• Part cost (with/without tax)
• Installation fees (if applicable)
• Shipping costs (based on location)
• Pickup availability at our dispatch center

Step 4: Pickup, Delivery, or On-Site Repair

Choose your preferred method:

• In-person pickup in Vancouver
• Courier delivery to homes or job sites across BC
• Same-day technician dispatch if repair is urgent

Real Example: Navien Control Board Request in Vancouver

A local customer recently reached out to ROMA via email before 7 a.m. with a request to purchase a replacement control panel for their Navien NCB series boiler. They asked about part availability, updated board compatibility, and options for shipping or pickup.

Our team responded within the hour, confirmed part availability, and scheduled a technician for same-day delivery and installation.

This kind of prompt, professional service is what sets ROMA apart in the Lower Mainland.

Full Support for All Navien Boiler Models

We provide control board diagnostics, part replacement, and complete boiler servicing for all Navien models, including:

Navien Residential Boilers:

• NCB Series (Combi boilers)
• NHB Series (Heating boilers only)
• NFC Series (Commercial-grade combi)
• NPE Series (Tankless water heaters)

Commercial Applications:

• Navien NFB Series
• Cascading systems for apartment buildings
• High-efficiency domestic hot water systems

ROMA technicians are trained in Navien’s control architecture, combustion tuning, venting systems, and electronic diagnostics.

Local Service Areas for Navien Boiler Parts and Repairs

We proudly serve residential and commercial customers across:

• Vancouver
• Burnaby
• Surrey
• Richmond
• North Vancouver
• West Vancouver
• Langley
• Coquitlam
• Port Coquitlam
• Abbotsford
• Delta
• Maple Ridge
• White Rock
• Chilliwack

Our mobile service vehicles are stocked with Navien repair parts, tools, and diagnostic equipment—ready to respond quickly to any job.

Emergency Boiler Repair and Diagnostics

If your boiler has suddenly failed—especially in the middle of winter or during a cold snap—ROMA offers 24/7 emergency repair services across the Greater Vancouver region.

Our emergency services include:

• On-site troubleshooting of Navien units
• Temporary heat solutions while awaiting part delivery
• Rapid board replacements or workarounds
• Emergency boiler resets and system flushes
• Gas safety inspections and leak checks

We prioritize vulnerable households, seniors, and commercial properties where heating loss poses a critical issue.

Choose ROMA for Expert Navien Support in BC

When it comes to Navien boiler parts, precision matters. That’s why ROMA Heating & Cooling is trusted by thousands of homeowners and businesses across BC.

What Sets Us Apart:

• Official Navien parts supplier and installer
• Licensed, insured, and Red Seal-certified technicians
• 25+ years of HVAC experience in BC
• OEM part verification and warranty assistance
• Same-day service in many locations
• Transparent pricing with no hidden fees

About Navien Boiler Control Panel Replacement and OEM Part Supply in Vancouver & Greater British Columbia

Navien boiler control panel issues are a leading cause of boiler malfunctions in homes and commercial buildings across British Columbia. At ROMA Heating & Cooling, we specialize in fast, reliable diagnostics and Navien OEM control board replacements for all models. Whether you’re located in Vancouver, Burnaby, Surrey, Richmond, or beyond, ROMA offers 24/7 emergency boiler services, local technician dispatch, and full support with OEM part sourcing, warranty processing, and safe installations.

• What is the control panel on a Navien boiler?
The control panel, also known as the PCB (Printed Circuit Board), is the electronic brain of your Navien boiler. It manages ignition, fan speed, temperature, sensors, safety switches, and communication with thermostats and zone valves.

• How do I know if my Navien boiler control board is faulty?
Common signs include no power to the display, constant error codes (like E003, E110, or E218), failure to ignite, or erratic heating cycles. ROMA technicians can confirm PCB failure using advanced diagnostic tools.

• Can a Navien boiler control board be repaired instead of replaced?
Generally, PCB boards are not repairable due to their complexity and safety standards. ROMA recommends full OEM replacement to ensure proper function and maintain Navien warranty compliance.

• How long does it take to replace a Navien control panel?
Most PCB replacements can be completed within 1–2 hours by a certified ROMA technician, including testing and calibration.

• What does a Navien OEM control panel replacement cost in Vancouver?
The cost typically ranges from $450–$850, including labor, diagnostics, and the OEM part. ROMA offers free estimates and upfront pricing for all boiler repairs.

• Is the control board covered under Navien’s warranty?
Yes, if your boiler is still under manufacturer warranty, the control board may be covered. ROMA can help with warranty claims and replacement part sourcing.

• Can I buy a Navien boiler control board myself and install it?
While OEM parts are available through authorized dealers, installation should only be performed by licensed HVAC technicians to avoid voiding warranties and for safety compliance.

• Does ROMA supply genuine Navien OEM control boards?
Yes, ROMA Heating & Cooling sources only genuine OEM parts directly from Navien-authorized distributors, ensuring compatibility and warranty protection.

• How fast can ROMA replace my Navien boiler PCB in Vancouver?
We offer same-day service in most cases, especially for emergency no-heat calls. Our warehouse carries common Navien PCB models in stock.

• What Navien models does ROMA service for control board issues?
We support all major models including NCB-240, NCB-210, NPE-240A, NHB Series, NFB Series, and older Navien tankless and combi units.

• What are the risks of using an aftermarket or refurbished control board?
Aftermarket parts may lack proper firmware, fail faster, or cause additional errors. ROMA recommends Navien-approved OEM components only.

• Can ROMA provide remote diagnostics for control board issues?
Yes, in some cases we can help troubleshoot over the phone or via video before dispatching a technician. Call us at (604) 704-0300.

• Does ROMA install control panels in commercial properties?
Absolutely. We service multi-residential buildings, retail locations, and commercial spaces across Greater Vancouver and British Columbia.

• Where does ROMA source Navien boiler parts in BC?
We source directly from Navien-authorized supply chains based in British Columbia, allowing fast delivery to Vancouver, Surrey, Burnaby, Coquitlam, and more.

• How does the control panel interact with other boiler components?
The PCB communicates with sensors, pumps, thermostats, gas valves, and fans to coordinate efficient and safe boiler operation.

• What causes a control panel to fail in Navien boilers?
Common causes include voltage spikes, water damage, overheating, corrosion, and age-related electronic degradation.

• Can power outages damage my Navien control board?
Yes, especially if there’s a surge when power returns. ROMA recommends using surge protectors for sensitive HVAC equipment.

• How long does a Navien PCB typically last?
Most boards last 8–12 years under normal conditions. However, failure can occur sooner if maintenance is neglected or if electrical issues are present.

• Does ROMA offer financing for Navien control panel replacements?
Yes, we offer financing plans and accept major credit cards. Ask us about our payment options during your free estimate.

• Can ROMA deliver the OEM part to my home or job site?
Yes, we offer direct part delivery and mobile boiler repair services across Vancouver, Richmond, Langley, Delta, and nearby cities.

• Is control panel replacement part of annual boiler maintenance?
Not usually, but our annual maintenance can detect early PCB issues before they lead to total system failure.

• Are ROMA’s Navien services available 24/7?
Yes, we offer 24/7 emergency boiler repair, including control board diagnostics and part replacement.

• Can ROMA replace the control board on older Navien models?
Yes, as long as OEM parts are still available, we can source and install control panels for legacy Navien systems.

• How do I schedule a Navien PCB replacement with ROMA?
Call us at (604) 704-0300 or email info@romaheating.ca to book service. We serve all of Greater Vancouver and the Fraser Valley.

• Does ROMA offer full boiler diagnostics with the PCB replacement?
Yes, we perform a complete system check to ensure no other hidden issues exist before or after replacing the control panel.

• Can a faulty control board cause a Navien boiler to leak?
While the board itself doesn’t cause leaks, improper control of pumps or valves can lead to overheating or pressure buildup that may result in leaks.

• What error codes indicate PCB failure on Navien boilers?
Codes like E003 (ignition failure), E110 (fan issue), or internal communication errors often point to a faulty control board.

• How can I prevent control board failure in my Navien boiler?
Install surge protection, keep the unit dry and well-ventilated, and schedule annual tune-ups with ROMA Heating.

• Do you support both Navien combi and tankless boilers?
Yes, we provide full diagnostics and OEM board replacement for all types of Navien heating systems.

• Can I drop off my boiler at ROMA for repair?
Most boiler repairs are done on-site, but you can arrange part pickup or bring small units to our authorized location with an appointment.

• What are the main differences between a Navien control board and a thermostat?
The control board governs the internal operation of the boiler, while the thermostat signals it when to start or stop heating based on room temperature.

• How do ROMA technicians test a faulty Navien control panel?
Our techs use multimeters, Navien diagnostic tools, and firmware readers to check voltage outputs, signal integrity, and error logs stored in the PCB.

• Can a boiler control board be affected by humidity?
Yes, moisture and condensation are major threats to control board integrity. ROMA recommends inspecting for water ingress during service visits.

• Is there a difference between control boards for the NCB and NPE series?
Yes, each Navien series has a unique control panel design tailored to its heating functions—combi (NCB) or tankless (NPE). ROMA installs the correct model for each.

• What should I do if my control panel shows a blank screen?
A blank screen may signal total PCB failure, a blown fuse, or a transformer issue. ROMA can diagnose the exact cause with same-day service.

• Does ROMA supply control panels for Navien’s commercial boilers?
Yes, we source OEM control panels for Navien’s NFB and NHB commercial series units used in apartments, offices, and large facilities.

• Can fluctuating water pressure affect the control board?
Not directly, but unstable pressure can trigger frequent system resets, which over time may stress the electronics in the control panel.

• What happens if the control board fails during the winter?
A control board failure results in a total boiler shutdown, meaning no heating or hot water—especially critical during freezing temperatures. ROMA offers 24/7 emergency replacement.

• Is the PCB failure more common in older or newer Navien models?
While older models are more prone due to age, power surges or installation issues can cause early PCB failure even in newer boilers.

• Do you recycle or dispose of old control panels?
Yes, ROMA safely disposes of all electronic waste, including old Navien PCBs, through certified recycling channels in BC.

• Can ROMA retrofit a new PCB into an older Navien boiler?
Only if compatible. ROMA checks firmware compatibility, wiring harnesses, and mounting requirements before confirming a retrofit option.

• Are Navien control panels model-specific?
Yes, each boiler model uses a unique PCB design. ROMA technicians always match part numbers exactly to ensure proper performance.

• Can ROMA update my boiler’s firmware during PCB installation?
Yes, where applicable, we can update the firmware on new control boards to the latest version as recommended by Navien.

• Do you provide Navien PCB replacements in North Vancouver?
Yes, we serve all of North Vancouver, West Vancouver, and the North Shore with local technicians and fast part delivery.

• Will replacing the control panel reset all my boiler settings?
Yes, all parameters and system history will be reset. ROMA technicians reprogram settings to match your home’s system during installation.

• Does ROMA offer parts-only sales for contractors?
Yes, qualified HVAC contractors can order OEM Navien control boards and other parts through ROMA with proof of certification.

• What certifications do ROMA techs have for boiler work?
Our team includes certified Class B Gasfitters, TECA members, and Navien-trained technicians with ongoing professional development.

• Can control board issues lead to gas valve malfunction?
Yes, a faulty PCB can send incorrect signals to the gas valve, which may cause ignition failure, safety lockout, or gas flow irregularities.

• Is the control board replacement covered by home insurance?
Possibly—if the failure resulted from a covered event like a power surge. ROMA can provide detailed documentation for insurance claims.

• Does ROMA supply Navien parts to contractors in Kelowna or Victoria?
We primarily serve Greater Vancouver, but special shipping arrangements can be made for bulk or urgent contractor requests elsewhere in BC.

• How many types of control boards does Navien make?
There are dozens of PCB variants across Navien’s product line, and each must be matched precisely to the boiler model and firmware version.

• Can I find the part number for my PCB on the control board itself?
Yes, part numbers are printed on the PCB. ROMA techs also verify them through Navien’s internal system using your model and serial number.

• Can ROMA service boilers in condos and high-rise buildings?
Yes, we regularly perform boiler diagnostics and PCB replacements in condos throughout Burnaby, Richmond, Vancouver, and Coquitlam.

• Do all Navien boiler errors mean the control board is faulty?
No, many errors are sensor or valve-related. That’s why a proper diagnostic scan from ROMA is essential before replacing any part.

• Can ROMA ship OEM Navien PCBs to remote areas of BC?
Yes, we can arrange courier shipping to remote towns in British Columbia for contractors or customers needing verified OEM parts.

• What’s the difference between Navien’s old and new PCB generations?
Newer boards feature improved firmware, faster processing, better sensor integration, and longer durability compared to older models.

• Does the PCB control the hot water temperature too?
Yes, the control panel regulates water temperature by adjusting burner operation and mixing levels based on user settings and sensor feedback.

• Can a PCB failure cause carbon monoxide risks?
Indirectly, yes—if it prevents proper combustion management. ROMA always checks flue gas safety after replacing any control board.

• How much does a standalone OEM control board cost?
Parts alone typically range from $280–$500 depending on model. ROMA provides bundled pricing with diagnostics and installation.

• Is ROMA Heating an authorized Navien service provider?
Yes, we are recognized by Navien as a certified service partner, offering warranty-compliant repairs and part replacements.

• Can ROMA help if I purchased my Navien boiler from another dealer?
Yes, we service all Navien units regardless of where you purchased them, including warranty processing and part installation.

• How quickly can ROMA access rare or discontinued PCB models?
We work directly with Navien distributors and can usually locate rare parts within 24–72 hours, even for older units.

• Will a faulty control board impact both heating and hot water?
Yes, a failed PCB disables all functions including space heating, domestic hot water, and pump/fan operation.

• Can ROMA perform multiple repairs during a PCB replacement?
Yes, if other components (e.g., sensors or valves) need replacement, we can combine repairs to save time and cost.

• Do Navien control boards store diagnostic history?
Yes, many PCBs store error logs and runtime history, which ROMA techs use to identify root causes before replacing the board.

• How do I prepare for a boiler control board service visit?
Clear the area around your boiler, make note of any error codes seen, and shut off the unit if it’s behaving erratically or leaking.

• What areas of Greater Vancouver does ROMA serve for boiler repairs?
We cover Vancouver, Burnaby, Surrey, Richmond, Langley, Coquitlam, Delta, Abbotsford, North Van, West Van, and more.

• Can a PCB cause loud noises from the boiler?
If the board mismanages fan speed or fails to control pump cycling, it may cause abnormal vibrations or banging sounds.

• What brands of HVAC components does ROMA install besides Navien?
We work with Lennox, Bosch, Viessmann, Carrier, Trane, Goodman, Rheem, York, Daikin, and more.

• Can ROMA install a Navien PCB in the same visit as diagnostics?
Yes, if we have the correct part in stock, our technicians can perform full diagnostics and install the new control board in one visit.

• Does the control panel also regulate the boiler’s safety features?
Yes, it manages ignition lockouts, overheat protection, fan operation, and flame detection to ensure safe functioning.

• Do I need to turn off power before replacing a PCB?
Yes. ROMA technicians always disconnect power and isolate gas before working on any internal boiler components.

• Are replacement PCBs backward compatible with older Navien models?
Only certain updated versions are backward compatible. ROMA verifies compatibility using the model and serial number.

• Can ROMA program the new PCB to match my old settings?
Yes, we configure your new control panel to match the original temperature settings, priority options, and sensor configurations.

• Do you service Navien combi boilers in Whistler or Squamish?
We primarily serve Greater Vancouver, but can arrange service or shipping to nearby cities upon request.

• How does ROMA ensure the replacement part is genuine?
We use verified supply chains and part tracking systems directly connected to Navien’s OEM distribution network.

• What’s the difference between a control board and a user interface panel?
The user interface is the external screen or button panel. The control board is the internal electronic system that processes and executes commands.

• How often should I have my Navien boiler inspected to prevent PCB issues?
Annual service is recommended. ROMA’s boiler tune-up includes control panel testing and sensor verification.

• Can a burnt smell indicate PCB failure?
Yes, if you notice a burnt plastic or electrical smell, it could be a sign of a shorted or overheating control board.

• Does FortisBC offer rebates for Navien boiler repairs or part replacements?
Currently, FortisBC rebates apply mostly to full system installations, but ROMA can help you check current incentives.

• Can ROMA replace the PCB in a boiler installed by another company?
Yes, we repair and upgrade all Navien units regardless of the original installer.

• What safety checks are performed after a PCB replacement?
ROMA runs ignition tests, combustion analysis, leak checks, and software verification to ensure full safety and performance.

• Are OEM Navien parts more reliable than third-party boards?
Yes, OEM parts are specifically designed, tested, and firmware-matched for Navien systems, ensuring superior reliability and longevity.

• Can voltage irregularities in older homes damage my boiler PCB?
Yes, older homes with unregulated power may expose electronics to surges. ROMA can install surge suppressors for added protection.

• Does a flashing power light indicate a PCB issue?
In some cases, yes—it can signal a boot loop, firmware error, or electrical fault on the main board.

• Do you provide written quotes for control board repairs?
Yes, all of ROMA’s services come with transparent, written estimates before any work is performed.

• How many ROMA vans are dispatched daily for boiler repairs in Vancouver?
We have multiple service vans covering Vancouver and surrounding cities, each stocked with common Navien OEM parts for faster turnaround.

• Can ROMA help source discontinued Navien parts internationally?
In special cases, yes—we work with global suppliers to find rare parts when they’re no longer stocked locally.

• Do Navien combi boilers have more complex PCBs than tankless models?
Yes, combi units manage both space heating and DHW, requiring more integrated controls and circuit functions.

• What’s the warranty on a replacement Navien control board from ROMA?
OEM parts typically carry a 1-year manufacturer warranty. ROMA also warranties our labor for all installations.

• Does the control panel handle external sensor inputs?
Yes, it processes inputs from temperature sensors, flow sensors, flame rods, and even outdoor reset sensors.

• Can I visually inspect my control board for damage?
We don’t recommend it. Opening your boiler can void the warranty and create safety hazards. Always call a technician for inspections.

• Does ROMA service Navien boilers in Port Coquitlam and Pitt Meadows?
Yes, we have full boiler service coverage across the Tri-Cities including Coquitlam, Port Moody, and surrounding areas.

• Can corrosion near the PCB cause intermittent errors?
Yes, corroded terminals or water-damaged boards may cause sporadic shutdowns and unreliable operation.

• How do I identify my Navien boiler’s model and serial number?
The information is usually on a sticker inside the unit’s front panel. ROMA techs can help if you’re unsure.

• Does ROMA perform warranty registration for new parts?
Yes, we assist with all OEM part registration and warranty documentation at the time of installation.

• How can I tell if my Navien control panel is obsolete?
If Navien no longer supports firmware updates or the part is discontinued, it’s considered obsolete. ROMA can offer retrofit options in these cases.

• What is the expected downtime during a PCB replacement?
Most replacements are completed within a 1–2 hour service window, depending on unit accessibility and configuration.

• Can ROMA replace the control panel on-site for wall-mounted boilers?
Yes, we have experience servicing both wall-hung and floor-mounted Navien units across residential and commercial settings.

• Do you offer bulk pricing for property managers or contractors?
Yes, ROMA provides bulk part pricing and priority service contracts for property managers, HVAC subcontractors, and builders.

• How do I contact ROMA Heating for Navien service?
Call us at (604) 704-0300 or email info@romaheating.ca. We’re available 24/7 for service across Greater Vancouver and BC.

• Why choose ROMA Heating for Navien control board replacement?
With over 25 years in HVAC and hydronic heating, ROMA provides fast diagnostics, genuine OEM parts, warranty-safe service, and highly trained Navien specialists.

Get Started Today – Replace Your Navien Boiler Control Panel with ROMA

Ready to replace your Navien boiler control panel or need help diagnosing the issue? Contact ROMA Heating & Cooling today for fast, friendly, and professional support.

Phone: (604) 704-0300
Email: info@romaheating.ca
Website: romaheating.ca

Whether you need parts shipped, picked up, or installed, our team is ready to help.

Speak to a technician in under 5 minutes, or schedule a visit at your convenience.

ROMA Heating & Cooling
Trusted HVAC Experts Serving British Columbia Since 1999

Explore every Navien service — installation, repair, tankless, maintenance and error codes — in our Navien hub for Greater Vancouver.