John Wood Water Heater Replacement Parts & Repair Services
If you’re looking for John Wood water heater replacement parts services in Metro Vancouver, ROMA Heating & Cooling is your trusted local expert. We provide genuine John Wood water heater replacement parts, professional repair services, and expert installations to ensure your water heater operates efficiently and safely. Whether you need a new anode rod, heating element, gas valve, thermostat, or pressure relief valve, our certified technicians can diagnose the issue and replace the necessary parts with factory-approved components.
John Wood Water Heater Replacement Parts & Repair Services in Metro Vancouver
John Wood water heaters are known for their durability, efficiency, and performance, but over time, certain components may wear out or fail. Instead of replacing the entire unit, replacing faulty parts can extend the lifespan of your water heater and restore its efficiency. At ROMA Heating & Cooling, we stock and source genuine John Wood replacement parts and provide same-day repair services across Vancouver, Burnaby, Richmond, Surrey, Coquitlam, Langley, and surrounding areas.
Common John Wood Water Heater Replacement Parts We Provide & Install
1. John Wood Anode Rod Replacement
The anode rod is a critical component that helps prevent rust and corrosion inside your water heater tank. If your water heater is more than 3-5 years old, replacing the anode rod can extend its lifespan and improve performance.
✔ Prevents rust and corrosion
✔ Extends the life of your water heater
✔ Reduces odors caused by bacteria in the tank
2. John Wood Heating Element Replacement
If you have an electric John Wood water heater and are experiencing inconsistent water temperatures or no hot water, the heating element may need replacement.
✔ Restores hot water quickly
✔ Available in various wattages for different models
✔ Increases energy efficiency
3. John Wood Gas Control Valve Replacement
The gas control valve regulates gas flow and maintains water temperature. If your gas water heater is failing to heat water properly or has a pilot light that won’t stay lit, a faulty gas valve may be the issue.
✔ Ensures safe and efficient gas flow
✔ Prevents overheating and gas leaks
✔ Essential for maintaining proper water temperature
4. John Wood Thermostat Replacement
If your water heater is not heating water to the correct temperature, the thermostat may be malfunctioning. Replacing a faulty thermostat can restore consistent water temperatures and improve energy efficiency.
✔ Ensures accurate temperature control
✔ Prevents overheating or lukewarm water issues
✔ Compatible with gas and electric models
5. John Wood Pressure Relief Valve (TPR Valve) Replacement
The temperature and pressure relief (TPR) valve is a safety feature that prevents excessive pressure buildup inside your water heater. If it’s leaking or failing to release pressure, it needs to be replaced immediately.
✔ Prevents tank explosions caused by excessive pressure
✔ Releases excess pressure safely
✔ Required for all modern water heaters
6. John Wood Dip Tube Replacement
The dip tube directs cold water to the bottom of the tank for heating. A broken dip tube can cause lukewarm water issues and inefficient heating.
✔ Ensures proper water circulation inside the tank
✔ Prevents sediment buildup
✔ Improves heating efficiency
7. John Wood Pilot Assembly & Igniter Replacement
For gas water heaters, the pilot light is responsible for igniting the burner. If it keeps going out or won’t stay lit, replacing the pilot assembly or igniter may be necessary.
✔ Restores proper burner function
✔ Prevents frequent pilot light failure
✔ Ensures efficient heating operation
8. John Wood Drain Valve Replacement
The drain valve allows you to flush sediment buildup from your water heater tank. If it’s leaking or clogged, replacing it can help maintain optimal efficiency.
✔ Prevents sediment buildup inside the tank
✔ Extends water heater lifespan
✔ Allows easy draining for maintenance
John Wood Water Heater Maintenance Services
Regular maintenance is essential to prolonging the lifespan of your John Wood water heater. At ROMA Heating & Cooling, we offer comprehensive maintenance services, including:
✔ Flushing the tank to remove sediment buildup
✔ Inspecting and replacing the anode rod
✔ Checking and replacing worn-out heating elements
✔ Testing and replacing thermostats and gas valves
✔ Checking for leaks and ensuring all connections are secure
Signs You Need John Wood Water Heater Replacement Parts
✔ No hot water or inconsistent temperature
✔ Pilot light keeps going out
✔ Strange noises coming from the tank
✔ Water takes too long to heat up
✔ Leaking water heater or pressure relief valve
✔ Rusty or discolored water
If you notice any of these warning signs, it’s time to call ROMA Heating & Cooling for a professional inspection and replacement parts service.
Areas We Serve for John Wood Water Heater Replacement Parts in Metro Vancouver
We provide John Wood water heater replacement parts and repair services in:
✔ Vancouver ✔ Burnaby ✔ Richmond ✔ Surrey ✔ Coquitlam ✔ Port Coquitlam ✔ New Westminster ✔ North Vancouver ✔ West Vancouver ✔ Delta ✔ Langley ✔ Maple Ridge ✔ Abbotsford ✔ White Rock ✔ Chilliwack
Why Choose ROMA Heating & Cooling for John Wood Water Heater Replacement Parts?
- Certified Technicians – Our team is fully licensed and trained in John Wood water heater repairs and part replacements.
- Genuine John Wood Parts – We use only OEM replacement parts to ensure quality and longevity.
- Same-Day & Emergency Service – We offer 24/7 emergency water heater repair services across Metro Vancouver.
- Affordable Pricing & No Hidden Fees – Transparent pricing with no surprises.
- Full Warranty on Parts & Labor – We back our work with a comprehensive warranty.
Frequently Asked Questions (FAQs) About John Wood Water Heater Replacement Parts
1. How do I know if my John Wood water heater needs new parts?
If your water heater is leaking, making strange noises, not heating properly, or showing signs of rust, it may need replacement parts. Contact ROMA Heating & Cooling for an inspection.
2. How much does it cost to replace John Wood water heater parts?
The cost varies based on the specific part, model, and labor required. Call us for a free quote.
3. Can I install John Wood replacement parts myself?
While some parts, like anode rods and thermostats, can be replaced by homeowners, more complex parts, such as gas valves and heating elements, should be installed by certified professionals for safety.
4. How often should I replace my John Wood water heater anode rod?
The anode rod should be checked every 3-5 years and replaced if it’s significantly corroded.
Frequently Asked Questions (FAQs) About John Wood Water Heater Replacement Parts Services in Metro Vancouver
John Wood water heaters are known for their reliability, but over time, certain components may wear out and require replacement. Whether you need a new thermocouple, heating element, gas valve, anode rod, or pressure relief valve, ROMA Heating & Cooling provides expert replacement parts services for John Wood water heaters. We offer same-day service, 24/7 emergency repairs, and free estimates across Metro Vancouver. Contact us at (604) 704-0300 for professional assistance.
FAQs About John Wood Water Heater Replacement Parts
• Where can I find John Wood water heater replacement parts in Metro Vancouver?
ROMA Heating & Cooling provides genuine John Wood water heater replacement parts and professional installation services in Vancouver, Burnaby, Richmond, Surrey, Coquitlam, Langley, and surrounding areas. Call (604) 704-0300 for service.
• What are the most common John Wood water heater parts that need replacement?
The most commonly replaced parts include:
- Thermocouples (for gas models)
- Heating elements (for electric models)
- Gas control valves
- Anode rods (to prevent corrosion)
- Pressure relief valves
- Ignition modules and pilot assemblies
- Dip tubes and drain valves
• How much does it cost to replace parts on a John Wood water heater?
The cost varies depending on the part and labor. Typical replacement costs include:
- Thermocouple: $100 – $250
- Heating element: $150 – $400
- Gas control valve: $250 – $600
- Anode rod: $100 – $300
- Pressure relief valve: $150 – $350
- Ignition system repairs: $200 – $500
Contact ROMA Heating at (604) 704-0300 for a free estimate.
• How do I know if my John Wood water heater needs a new thermocouple?
If your pilot light won’t stay lit, the thermocouple may be faulty. ROMA Heating can inspect and replace it quickly.
• Why is my John Wood water heater not producing hot water?
Possible causes include a burnt-out heating element (electric models), a faulty gas valve (gas models), or sediment buildup. A professional diagnosis is recommended.
• Do you offer emergency water heater repair services?
Yes! ROMA Heating provides 24/7 emergency water heater repairs and part replacements in Metro Vancouver. Call (604) 704-0300 anytime.
• Where can I buy an anode rod for my John Wood water heater?
We provide high-quality magnesium and aluminum anode rods to extend the life of your water heater. Professional installation is recommended to ensure proper protection.
• How often should I replace the anode rod in my John Wood water heater?
Anode rods should be replaced every 3-5 years to prevent tank corrosion. If you have hard water, you may need to replace it sooner.
• Why is my John Wood water heater leaking?
Leaks may be due to a faulty pressure relief valve, a corroded anode rod, or a cracked tank. ROMA Heating can diagnose and replace damaged components.
• Can I replace John Wood water heater parts myself?
While some minor replacements, like anode rods or drain valves, can be DIY, gas and electrical repairs should always be done by a certified technician. Improper installation can lead to safety hazards.
• Do you install gas control valves for John Wood water heaters?
Yes, ROMA Heating provides gas control valve replacement and calibration to restore proper functionality.
• Why is my John Wood water heater making strange noises?
Rumbling or banging sounds are often caused by sediment buildup in the tank. A flush and potential dip tube replacement may be needed.
• What areas do you service for John Wood water heater part replacements?
We serve Vancouver, Burnaby, Richmond, Surrey, Coquitlam, Langley, Delta, North Vancouver, West Vancouver, Abbotsford, and all surrounding areas.
• How long does it take to replace a water heater part?
Most part replacements take 1-3 hours, depending on the complexity. Same-day service is available.
• What should I do if my John Wood water heater stops working suddenly?
First, check the pilot light (gas models) or circuit breaker (electric models). If the issue persists, call ROMA Heating at (604) 704-0300 for fast diagnostics and repairs.
• Do you provide maintenance to prevent part failures?
Yes, we offer annual water heater maintenance services, including flushing, part inspections, and tune-ups to extend your heater’s lifespan.
• Do you stock replacement parts for John Wood tankless water heaters?
Yes, we carry heat exchangers, flow sensors, ignition modules, and control boards for John Wood tankless water heaters.
• Can you replace the dip tube in my John Wood water heater?
Yes, we replace worn-out dip tubes to restore proper hot water distribution.
• How do I schedule a John Wood water heater part replacement service?
Call ROMA Heating at (604) 704-0300 or email info@romaheating.ca to book an appointment.
If you need John Wood water heater replacement parts and professional service in Metro Vancouver, ROMA Heating & Cooling is here to help. We provide same-day service, 24/7 emergency repairs, and expert part replacements. Contact us today at (604) 704-0300 for a free estimate.
Contact ROMA Heating & Cooling for John Wood Water Heater Replacement Parts in Metro Vancouver
If you need John Wood water heater replacement parts, repair, or maintenance, ROMA Heating & Cooling is here to help.
📞 Call Now: (604) 704-0300
📧 Email: info@Romaheating.ca
🌍 Visit Our Website: ROMA Heating & Cooling
We provide fast, reliable, and affordable service to ensure your John Wood water heater runs efficiently!
What Greater Vancouver Homeowners Say
“Nelson worked hard to get the NTI unit fixed. He was always polite, courteous and on time.”
“As always Nelson was super efficient. Showed up on time and was quick to work. I had a full maintenance done on the fireplaces and furnace. He was awesome. I won’t use anyone else.”
“Excellent service. Andy had a spare Carrier inducer with him which saved us time.”
“Was very prompt to respond to our issues. Technician was scheduled for the day following my initial call.”
“Very professional heating company. Price is reasonable, excellent work.”
“Highly recommend this company. It was a pleasure dealing with Shawn and Nelson.”
“Professional and courteous technicians with attention to detail and customer needs.”
“Always great, friendly service. Serviced the hot water on-demand system. Honest and informative. Thanks!”
“Speedy response time, honest, and professional service from start to finish.”
Why Greater Vancouver Trusts ROMA Heating & Cooling
ROMA Heating & Cooling has installed, repaired and maintained heating and cooling systems across Metro Vancouver since 1999. Our team are TSBC-licensed gas fitters (Gas LGA0202903) and Red Seal-trained technicians — licensed, bonded and insured — and we back every job with upfront, flat-rate pricing and a 100% satisfaction guarantee. We hold a 4.8★ rating from 221+ Google reviews.
- Authorized for 30+ brands (Lennox, Carrier, Viessmann, Navien, Rheem & more)
- Upfront flat-rate pricing — no overtime or hidden fees
- Free, no-obligation estimates on new installations
- Locally owned & operated in Burnaby, BC
No Hidden Fees
Our service rates are transparent and easy to understand. You approve upfront, flat-rate pricing before we start — so you never get a bill you didn’t expect.
Licensed & Bonded
ROMA is a TSBC-licensed gas contractor (Gas LGA0202903). Our technicians are bonded, insured and Red Seal-trained — qualified for any heating or cooling system.
Free Estimates
We offer free, no-obligation estimates on new installations — furnaces, boilers, heat pumps, air conditioners, tankless and hot-water tanks.
ROMA Heating & Cooling is a trusted HVAC contractor serving Metro Vancouver since 1999. We specialize in furnace repair, heat pump installation, boiler services, air conditioning, and emergency heating solutions for residential, commercial, and government clients. Available 24/7, our certified technicians deliver fast, reliable, and affordable HVAC services across Greater Vancouver.