Bryant Heat Pump Error Code 55 — Meaning & Repair in Greater Vancouver
If your Bryant heat pump is showing Error Code 55 on the Evolution wall control, it is reporting a coil temperature sensor fault. Below, the team at ROMA Heating & Cooling explains exactly what this code means on a Bryant heat pump, what typically causes it, whether it is a safety concern, and how our gas-licensed, insured technicians diagnose and repair it across Greater Vancouver. This page is informational; Code 55 should be diagnosed and repaired by a qualified professional, not by the homeowner.
| Detail | What it means for your Bryant heat pump |
|---|---|
| Code | 55 |
| Meaning | Coil Temperature Sensor Fault |
| Common system response | The heat pump stops or limits normal operation to protect itself |
| Safety concern? | Not an immediate hazard, but call promptly |
| Who to call in Metro Vancouver | ROMA Heating & Cooling — (604) 704-0300 |
What Bryant Code 55 Means
Code 55 on a Bryant heat pump means the coil temperature sensor has faulted. This sensor measures the temperature of the outdoor coil and is essential to proper defrost control in heating mode. When the control reads an out-of-range, open or shorted value from this sensor, it records Code 55. A faulty coil sensor can lead to poor defrost behavior, such as excessive frost buildup or unnecessary defrost cycles.
When You Might See Bryant Code 55
Homeowners across Greater Vancouver often first notice Code 55 when the Evolution wall control displays a system malfunction message and the heat pump stops delivering the heating or cooling they expect. The code may appear suddenly during a temperature extreme, or it may show up intermittently before becoming persistent. Bryant’s communicating systems store the fault in the control’s history, which lets a technician see when Code 55 occurred and whether it has been repeating. Because the same code can be logged under several different real-world conditions, the display alone does not tell the whole story — it is the starting point for a proper diagnosis.
What Typically Causes Bryant Code 55
Several conditions can trigger Code 55 on a Bryant heat pump. The most common causes our technicians find include:
- A failed outdoor coil temperature sensor (thermistor)
- A sensor that has detached from the coil
- A damaged, loose or corroded sensor connection
- Wiring damage between the sensor and the control board
This list is provided for your understanding only. Confirming which of these is responsible requires professional test instruments and training, which is why ROMA carries out a full diagnosis rather than guessing at a single cause. Replacing a part without verifying the root cause is one of the most common reasons a fault like Code 55 comes back.
Is Code 55 a Safety Concern?
Code 55 is a sensor fault and is not a combustion or carbon-monoxide hazard. However, because this sensor drives defrost control, an unresolved fault can let ice build up on the outdoor coil in winter, hurting heating performance and potentially stressing the system. It should be diagnosed and corrected by a qualified technician.
How ROMA Repairs It
When you call ROMA Heating & Cooling about Bryant Code 55, our gas-licensed and insured technicians follow a thorough, manufacturer-aligned process:
- Confirming Code 55 and reading the coil sensor value with the service tool
- Testing the coil temperature sensor against Bryant specifications
- Inspecting the sensor’s contact with the coil, plus its wiring and connector
- Replacing the sensor with a genuine Bryant OEM part and verifying correct defrost operation
We diagnose the true root cause, use genuine Bryant OEM parts, and verify the repair so the fault does not simply return. Serving Greater Vancouver since 1999, ROMA has built its reputation on accurate, lasting heat pump repairs.
Why Professional Diagnosis Matters for Code 55
Bryant Evolution heat pumps are sophisticated, communicating, often inverter-driven systems, and Code 55 can stem from more than one underlying problem. Pinpointing the correct one calls for the Bryant service tool, refrigeration gauges, electrical meters and the training to interpret them safely. Just as importantly, much of a heat pump involves sealed refrigerant and high-voltage power that are regulated and genuinely hazardous to work on without the right licensing and equipment. ROMA’s technicians are gas-licensed and insured, so you get a diagnosis that is both accurate and safe — and a repair that protects the long-term reliability of your equipment.
Same-Day Emergency Heat Pump Service Across Metro Vancouver
A heat pump locked out on Code 55 can leave you without heat in winter or cooling in a heat wave. ROMA offers same-day emergency heat pump diagnosis and repair throughout Vancouver, Burnaby, Surrey, Richmond, Coquitlam, Port Coquitlam, Port Moody, New Westminster, North Vancouver, West Vancouver, Delta, Langley, Maple Ridge, and the surrounding Metro Vancouver communities. If your Bryant heat pump is displaying Code 55, call ROMA Heating & Cooling now at (604) 704-0300 and one of our licensed technicians will get your system safely back in service.
What Our Customers Say
“Nelson arrived at our house one day after requesting an appointment, and solved our heat pump issue within half an hour during a heat wave.”
— Gordon Francis, Google review (★★★★★)
“Roma installed a heat pump for me. I’m so happy with the service — thank you Shawn and Bob.”
— Babak Heydari, Google review (★★★★★)
Frequently Asked Questions
What does Error Code 55 mean on a Bryant heat pump?
Code 55 indicates a coil temperature sensor fault on a Bryant heat pump. It is a protective signal from the outdoor unit’s control that something needs professional attention. ROMA can diagnose the exact cause and repair it — call (604) 704-0300.
What causes Bryant heat pump Code 55?
It can be triggered by more than one condition, and only a hands-on diagnosis with proper test equipment can confirm which applies to your system. ROMA’s licensed technicians identify the true root cause of Code 55 rather than guessing. Call (604) 704-0300 to book a diagnosis.
Is Bryant heat pump Code 55 dangerous?
Code 55 is not a carbon-monoxide or fire hazard, and a heat pump has no burner. It will, however, usually stop your system from heating or cooling properly until it is repaired. Call ROMA at (604) 704-0300 for prompt professional diagnosis.
Can Bryant Code 55 be repaired?
In most cases, yes. Once ROMA’s technicians confirm the cause of Code 55, we repair it using genuine Bryant OEM parts and verify the fix so it does not return. Call (604) 704-0300 for a professional assessment.
Who should I call for Bryant heat pump Code 55 in Greater Vancouver?
Call ROMA Heating & Cooling at (604) 704-0300. We are a gas-licensed, insured Greater Vancouver HVAC company serving Metro Vancouver since 1999, offering same-day emergency heat pump diagnosis and repair.
Related Guides & Services
- Heat Pump Not Heating
- Heat Pump Not Cooling
- Heat Pump Maintenance
- Heat Pump Leak Detection & Repair
- Emergency HVAC Repair
Call ROMA Heating & Cooling Today
For fast, professional diagnosis and repair anywhere in Greater Vancouver, call (604) 704-0300 or email info@romaheating.ca. Same-day and after-hours service, gas-licensed and insured, serving the Lower Mainland since 1999.
What Greater Vancouver Homeowners Say
“Nelson worked hard to get the NTI unit fixed. He was always polite, courteous and on time.”
“As always Nelson was super efficient. Showed up on time and was quick to work. I had a full maintenance done on the fireplaces and furnace. He was awesome. I won’t use anyone else.”
“Excellent service. Andy had a spare Carrier inducer with him which saved us time.”
“Was very prompt to respond to our issues. Technician was scheduled for the day following my initial call.”
“Very professional heating company. Price is reasonable, excellent work.”
“Highly recommend this company. It was a pleasure dealing with Shawn and Nelson.”
“Professional and courteous technicians with attention to detail and customer needs.”
“Always great, friendly service. Serviced the hot water on-demand system. Honest and informative. Thanks!”
“Speedy response time, honest, and professional service from start to finish.”
Why Greater Vancouver Trusts ROMA Heating & Cooling
ROMA Heating & Cooling has installed, repaired and maintained heating and cooling systems across Metro Vancouver since 1999. Our team are TSBC-licensed gas fitters (Gas LGA0202903) and Red Seal-trained technicians — licensed, bonded and insured — and we back every job with upfront, flat-rate pricing and a 100% satisfaction guarantee. We hold a 4.8★ rating from 221+ Google reviews.
- Authorized for 30+ brands (Lennox, Carrier, Viessmann, Navien, Rheem & more)
- Upfront flat-rate pricing — no overtime or hidden fees
- Free, no-obligation estimates on new installations
- Locally owned & operated in Burnaby, BC
No Hidden Fees
Our service rates are transparent and easy to understand. You approve upfront, flat-rate pricing before we start — so you never get a bill you didn’t expect.
Licensed & Bonded
ROMA is a TSBC-licensed gas contractor (Gas LGA0202903). Our technicians are bonded, insured and Red Seal-trained — qualified for any heating or cooling system.
Free Estimates
We offer free, no-obligation estimates on new installations — furnaces, boilers, heat pumps, air conditioners, tankless and hot-water tanks.
ROMA Heating & Cooling is a trusted HVAC contractor serving Metro Vancouver since 1999. We specialize in furnace repair, heat pump installation, boiler services, air conditioning, and emergency heating solutions for residential, commercial, and government clients. Available 24/7, our certified technicians deliver fast, reliable, and affordable HVAC services across Greater Vancouver.