The heat exchanger is the heart of a gas furnace. It’s the metal component that separates the toxic combustion gases from the clean air your furnace blows through the house. When it cracks, those combustion gases, including carbon monoxide (CO), can escape into your home’s air. That makes it one of the most serious furnace problems there is.
Safety First
If you suspect a cracked heat exchanger and anyone feels unwell, or a CO alarm sounds, get everyone outside to fresh air and call 911. Otherwise, turn the furnace off at the thermostat and switch, and do not run it again until a licensed technician has inspected it. Never try to inspect or repair the heat exchanger yourself; it requires the furnace be disassembled by a professional.
Warning Signs to Watch For
📞 Talk to a licensed ROMA technician — (604) 704-0300
- Yellow or flickering flame: Burner flames should be steady and blue. Yellow, orange, or dancing flames signal incomplete combustion.
- Soot buildup: Black soot inside the furnace cabinet points to combustion problems.
- Strong odor: A pungent, chemical, or metallic smell when the furnace runs can accompany a crack.
- Unusual sounds: A rattling or clicking noise as the furnace starts up may be metal expanding around a crack.
- Excess condensation: Extra moisture on windows and walls when heating can indicate combustion byproducts entering the air.
- Physical symptoms: Headaches, nausea, or dizziness that ease when you leave the house.
- Visible corrosion or cracks: Rust and stress cracks on visible metal components.
- CO detector activation: Any alarm from a working carbon monoxide detector should always be treated as real until proven otherwise.
Why Heat Exchangers Crack
| Cause | Explanation |
|---|---|
| Age and metal fatigue | Years of heating and cooling cycles stress the metal |
| Overheating | Restricted airflow from dirty filters forces the unit to run hot |
| Short-cycling | Frequent on-off cycles accelerate wear |
| Improper sizing or installation | An oversized furnace can overheat and stress the exchanger |
| Corrosive indoor air | Chemical fumes from cleaning products or nearby renovation work can accelerate metal corrosion over time |
Notice that dirty filters and airflow restrictions are on that list, which is why routine maintenance matters so much.
How Technicians Test for a Crack
Because cracks are often hidden inside the furnace cabinet, technicians use specific tools rather than a visual glance alone. Common methods include a combustion analyzer that measures flue gas composition, a dye or smoke test that reveals leaks around the exchanger seams, and a borescope camera to inspect hard-to-reach sections. A thorough inspection may take longer than a quick tune-up, but it is the only reliable way to confirm or rule out a crack.
Why this is different from a normal repair
Most furnace repairs involve swapping a part while the furnace stays off during the work and resumes normal, safe operation afterward. A cracked heat exchanger is different because the furnace cannot be safely run at all until the exchanger is replaced or the whole unit is replaced, since every combustion cycle risks pushing more exhaust gas into your ductwork. This is why technicians insist on shutting the furnace down immediately rather than scheduling a follow-up visit.
Repair or Replace?
A cracked heat exchanger usually can’t be safely patched. On older furnaces, replacing the exchanger often costs enough that replacing the whole furnace is the smarter choice, especially given efficiency gains from a new unit. A licensed technician will confirm the diagnosis and lay out your options; costs vary by furnace, so beware of anyone quoting without inspecting. Our furnace team can walk you through repair versus replacement.
Prevention
Annual furnace inspections catch airflow issues, monitor the exchanger’s condition, and keep combustion clean, all of which extend its life. ROMA Heating & Cooling is a TSBC-licensed gas contractor (Gas licence LGA0202903). Our HVAC maintenance plans include heat exchanger checks and CO safety testing. If you’re seeing any of the signs above, once your home is safe, book a free estimate or contact our Burnaby office for an inspection.
Need a licensed Greater Vancouver HVAC team?
ROMA Heating & Cooling has served Metro Vancouver since 1999 — TSBC-licensed (Gas LGA0202903), bonded & insured, 4.8★ from 221 Google reviews. Upfront flat-rate pricing, free estimates, 0% financing (OAC), 7 days a week.
Frequently Asked Questions
Is it safe to run a furnace with a cracked heat exchanger?
No. A cracked heat exchanger can leak carbon monoxide into your home’s air. Turn the furnace off and have a licensed technician inspect it before using it again. If anyone feels ill or a CO alarm sounds, get outside and call 911.
Can a cracked heat exchanger be repaired?
Heat exchangers generally can’t be safely patched. Replacement is required, and on older furnaces the cost often makes full furnace replacement the better value. A technician will confirm and explain your options.
How can I prevent my heat exchanger from cracking?
Change filters regularly to protect airflow, avoid short-cycling, ensure the furnace is correctly sized, and get annual professional inspections. These habits reduce overheating and metal fatigue.
Does a cracked heat exchanger always release carbon monoxide?
Not every crack leaks CO into your living space, but the risk is real and unpredictable. Because CO is colorless and odorless, any suspected crack should be treated as a safety issue and inspected by a professional.
Reviewed by the ROMA Heating & Cooling team — TSBC-licensed gas contractor (Gas LGA0202903), serving Greater Vancouver since 1999. Updated June 2026.
What Greater Vancouver Homeowners Say
“Nelson worked hard to get the NTI unit fixed. He was always polite, courteous and on time.”
“As always Nelson was super efficient. Showed up on time and was quick to work. I had a full maintenance done on the fireplaces and furnace. He was awesome. I won’t use anyone else.”
“Excellent service. Andy had a spare Carrier inducer with him which saved us time.”
“Was very prompt to respond to our issues. Technician was scheduled for the day following my initial call.”
“Very professional heating company. Price is reasonable, excellent work.”
“Highly recommend this company. It was a pleasure dealing with Shawn and Nelson.”
“Professional and courteous technicians with attention to detail and customer needs.”
“Always great, friendly service. Serviced the hot water on-demand system. Honest and informative. Thanks!”
“Speedy response time, honest, and professional service from start to finish.”
Why Greater Vancouver Trusts ROMA Heating & Cooling
ROMA Heating & Cooling has installed, repaired and maintained heating and cooling systems across Metro Vancouver since 1999. Our team are TSBC-licensed gas fitters (Gas LGA0202903) and Red Seal-trained technicians — licensed, bonded and insured — and we back every job with upfront, flat-rate pricing and a 100% satisfaction guarantee. We hold a 4.8★ rating from 221+ Google reviews.
- Authorized for 30+ brands (Lennox, Carrier, Viessmann, Navien, Rheem & more)
- Upfront flat-rate pricing — no overtime or hidden fees
- Free, no-obligation estimates on new installations
- Locally owned & operated in Burnaby, BC
No Hidden Fees
Our service rates are transparent and easy to understand. You approve upfront, flat-rate pricing before we start — so you never get a bill you didn’t expect.
Licensed & Bonded
ROMA is a TSBC-licensed gas contractor (Gas LGA0202903). Our technicians are bonded, insured and Red Seal-trained — qualified for any heating or cooling system.
Free Estimates
We offer free, no-obligation estimates on new installations — furnaces, boilers, heat pumps, air conditioners, tankless and hot-water tanks.
ROMA Heating & Cooling is a trusted HVAC contractor serving Metro Vancouver since 1999. We specialize in furnace repair, heat pump installation, boiler services, air conditioning, and emergency heating solutions for residential, commercial, and government clients. Available for same-day and after-hours service, our certified technicians deliver fast, reliable, and affordable HVAC services across Greater Vancouver.
Part of our Gas Furnace Guide: Everything Metro Vancouver Homeowners Need to Know
Related guides in this topic:
Real ROMA furnace work. These photos are from our own jobs, not stock images. See more in our work gallery or call (604) 704-0300.
