Greater Vancouver’s Trusted HVAC Experts Since 1999 · 4.8★ (221 reviews)

TSBC-Licensed Gas Contractor · Gas LGA0202903Licensed, Bonded & InsuredServing Greater Vancouver since 19994.8★ (221 Google reviews)
Speak with a licensed ROMA technician todayCall (604) 704-0300Free Estimate

Reviewed by the ROMA Heating & Cooling team — TSBC-licensed gas contractor (Gas LGA0202903), bonded & insured, serving Metro Vancouver since 1999. This page was refreshed in September 2026 for the current heating season. Need a second set of eyes? Call (604) 704-0300.

In our service experience, the guidance above holds for most gas equipment in the Lower Mainland — soft water means magnetite sludge and sediment are the real wear factors, not scale. Every system differs; confirm details against your own manual or a licensed technician.

What sets a Vitodens 100-W combi apart when it needs service?

Get a Quick Quote — Right Here

Fast response from a licensed ROMA technician — no obligation.









4.8★ from 221+ Google reviews · Licensed & insured · TSBC LGA0202903

Prefer to talk now? Call (604) 704-0300

The Vitodens 100-W is a compact wall-hung condensing combi: a stainless steel heat exchanger heats your radiators or in-floor loops, and a separate plate heat exchanger makes domestic hot water on demand. Good service on it means keeping the burner, the heat exchanger coil and the condensate path clean, and keeping debris out of the water side.

Viessmann builds this boiler around its stainless coil with a cylindrical burner sitting inside it. On a service we remove the burner, inspect the burner mesh and the gasket that seals the burner door, and clean the coil passages, which collect combustion residue over the seasons. The burner door gasket and the ignition and flame-sensing electrodes are normal wear items on these boilers, and we replace them when they look tired rather than waiting for a lockout in January. The combi adds a diverter valve that switches between heating and hot water, plus that plate exchanger. When a customer says the shower drifts from hot to lukewarm, or the radiators warm up every time a tap runs, the diverter and the plate exchanger are the first places we look.

Many of these boilers have been on walls long enough that some electronic parts are now supplied as updated replacements rather than identical originals. We confirm what is offered for your unit’s generation before quoting a board or display repair, so the quote holds.

How do Greater Vancouver’s water and older pipes affect a Vitodens combi?

Our water is soft, so the trouble here is sediment and magnetite, the black iron sludge shed by older steel pipes and radiators, rather than mineral build-up. In older hydronic homes that sludge can travel into a modern stainless coil and plate exchanger unless the system has a strainer or magnetic dirt separator protecting the boiler.

Rather have a licensed pro handle it? Fast, honest help across Greater Vancouver.Call (604) 704-0300Free Estimate

Plenty of Vitodens combis in the Lower Mainland replaced a floor-standing cast-iron boiler in a character house, a 1960s bungalow with fin-tube convectors, or a townhouse with in-floor heat. The boiler is new; the pipes are not. That is why we inspect the system side as closely as the boiler itself: the dirt separator if one is fitted, the colour of the system water, the expansion tank charge and the pressure relief valve. In condos and strata townhouses the boiler often hangs in a laundry closet with the vent leaving through a side wall or a shared chase, so we check the vent run and the clearances at the termination and work within strata access rules. Long wet winters mean the condensate drain, and its neutraliser where one is fitted, must flow freely, because a blocked drain is a common reason a condensing boiler shuts itself down.

Any change to gas piping or venting on the boiler needs a gas permit, issued by Technical Safety BC in most municipalities or by the City of Vancouver for homes inside Vancouver.

What does a ROMA service visit on a Vitodens 100-W involve, step by step?

A full annual service usually takes two to three hours, depending on how much residue is inside the coil and how tight the closet is. We isolate gas and power, open the boiler, clean and inspect it, then bring it back up and test combustion on both heating and hot water before we leave.

  1. Read the fault history and settings on the boiler control, and ask how heating and hot water have behaved this season.
  2. Isolate gas and power, then remove the casing and the burner assembly.
  3. Inspect the burner mesh, the burner door gasket, the electrodes and the insulation panel; replace worn items with your approval.
  4. Clean the heat exchanger passages and flush the condensate trap and drain.
  5. Check the hot water side: how the flow sensor responds, the diverter valve, and the plate exchanger for signs of debris.
  6. Check system pressure, the expansion tank, the relief valve and any strainer or dirt separator, and look at the system water.
  7. Reassemble, leak-test the gas connections, and run a combustion analysis.
  8. Inspect the vent run and the outdoor termination, then walk you through what we found.

What moves the price of servicing or repairing a Vitodens 100-W?

An annual service on a clean boiler is a predictable job; repairs vary with the part and with the condition of the system water. Once we have inspected the boiler you get an upfront flat-rate written quote — call (604) 704-0300 or email info@romaheating.ca.

  • Wear parts needed at service time, such as the burner door gasket and electrodes
  • Whether the diverter valve or plate exchanger is behind the hot water swings
  • Magnetite or sludge that calls for a system flush or a new dirt separator
  • Board, display or fan repairs on an older generation, where the replacement is an updated part
  • Closet access, strata scheduling and any vent corrections

If the coil itself is failing, we price replacement alongside repair; our boiler repair page explains how we make that call, and financing is available OAC.

Should I repair my older Vitodens 100-W or start thinking about replacement?

Most of these boilers are worth servicing and repairing for many seasons, and replacement only makes sense when the heat exchanger is failing or repairs keep stacking up. This is how we usually frame the decision with owners after the inspection.

What we find on the boilerUsually repair?When replacement enters the talk
Worn gasket, electrodes or igniterYes, routine wearNot on its own
Hot water swings while heating works fineYes, diverter or plate exchangerOnly alongside other major faults
Coil clogged with sludge but intactYes, clean, flush and protect with a dirt separatorIf blockage returns after system work
Coil leaking or visibly corrodedRarelyYes, we compare options with you
Control board failure on an older unitOften, with an updated partIf no part is offered for that generation

Gas and CO safety: if you smell gas, leave the home with everyone, avoid light switches, and phone FortisBC’s emergency line and 911 once outside; a sounding CO alarm, headaches or nausea mean get out and call 911.

How do I book Vitodens combi service, and what helps you prepare?

We book boiler service 7 days a week through our booking page or by phone. A same-day visit is possible when the schedule allows, and a few photos sent ahead let us bring the parts this boiler most often needs.

  • A photo of the rating plate, usually on the side or underside of the casing
  • A photo of the display showing any message or symbol
  • Whether heating, hot water or both are affected, and since when
  • Access notes: closet size, condo or strata rules, parking and elevator booking

Which Greater Vancouver communities do we cover for Vitodens service?

We service Vitodens combis throughout Greater Vancouver, including Vancouver, Burnaby, Richmond, Coquitlam and North Vancouver. ROMA has worked on Metro Vancouver heating systems since 1999 from our Burnaby office, as a TSBC-licensed gas contractor (Gas LGA0202903), bonded and insured, with a 4.8★ rating from 221 Google reviews.

To get your combi on the schedule, call (604) 704-0300 or email the rating-plate photo to info@romaheating.ca.

More questions we hear about this

How often should a Vitodens 100-W combi be serviced in a Vancouver-area home?

We suggest a full service once a year, ideally before the heating season. A condensing combi runs for both heat and hot water, so it works year-round and builds residue in the coil and condensate trap even through summer. Homes with older radiators or steel pipes benefit most, because a yearly look at the system water catches magnetite before it reaches the plate exchanger.

Why does my Vitodens combi give lukewarm water when the heating is on?

On a combi, hot water should take priority over heating through the diverter valve. When the shower goes lukewarm or the radiators heat up while a tap runs, a sticking diverter or a partly blocked plate exchanger is a common cause. We test both on site, along with how the flow sensor responds, before recommending any part.

Can a Vitodens 100-W replace my old cast-iron boiler with radiators?

Often yes, but the old system needs attention first. Cast-iron radiators and steel pipes carry years of sludge that a compact stainless coil does not tolerate well. We usually recommend flushing the system and fitting a magnetic dirt separator when a wall-hung combi goes in, and we review venting and gas supply before giving a written quote.

Do you need my strata's permission to service a combi in a condo?

Routine service inside your unit usually needs no strata approval, though many buildings require notice for contractors, elevator bookings or parking. Venting changes or relocating the boiler are different and normally need strata sign-off as well as a gas permit. Send us your building's contractor rules when you book and we will plan the visit around them.

What Greater Vancouver Homeowners Say

4.8/5 from 221+ verified Google reviews

“Nelson worked hard to get the NTI unit fixed. He was always polite, courteous and on time.”

Chris Tipple · Verified Google review

“As always Nelson was super efficient. Showed up on time and was quick to work. I had a full maintenance done on the fireplaces and furnace. He was awesome. I won’t use anyone else.”

Tammy D · Verified Google review

“Excellent service. Andy had a spare Carrier inducer with him which saved us time.”

Steven E · Verified Google review

“Was very prompt to respond to our issues. Technician was scheduled for the day following my initial call.”

jason l · Verified Google review

“Very professional heating company. Price is reasonable, excellent work.”

Jessica Feng · Verified Google review

“Highly recommend this company. It was a pleasure dealing with Shawn and Nelson.”

Charlotte Stipp · Verified Google review

“Professional and courteous technicians with attention to detail and customer needs.”

Ted Laursen · Verified Google review

“Always great, friendly service. Serviced the hot water on-demand system. Honest and informative. Thanks!”

Wah Gee · Verified Google review

“Speedy response time, honest, and professional service from start to finish.”

Lauren McCaughey · Verified Google review

Read more reviews Call (604) 704-0300

Request Your Free Estimate

Fast response from a licensed ROMA technician — no obligation.









4.8★ from 221+ Google reviews · Licensed & insured · TSBC LGA0202903

Prefer to talk now? Call (604) 704-0300

Why Greater Vancouver Trusts ROMA Heating & Cooling

ROMA Heating & Cooling has installed, repaired and maintained heating and cooling systems across Metro Vancouver since 1999. Our team are TSBC-licensed gas fitters (Gas LGA0202903) and Red Seal-trained technicians — licensed, bonded and insured — and we back every job with upfront, flat-rate pricing and a 100% satisfaction guarantee. We hold a 4.8★ rating from 221+ Google reviews.

  • Authorized for 30+ brands (Lennox, Carrier, Viessmann, Navien, Rheem & more)
  • Upfront flat-rate pricing — no overtime or hidden fees
  • Free, no-obligation estimates on new installations
  • Locally owned & operated in Burnaby, BC

No Hidden Fees

Our service rates are transparent and easy to understand. You approve upfront, flat-rate pricing before we start — so you never get a bill you didn’t expect.

Licensed & Bonded

ROMA is a TSBC-licensed gas contractor (Gas LGA0202903). Our technicians are bonded, insured and Red Seal-trained — qualified for any heating or cooling system.

Free Estimates

We offer free, no-obligation estimates on new installations — furnaces, boilers, heat pumps, air conditioners, tankless and hot-water tanks.

Call Now Book Now
Emergency
Call NowFree Estimate
Scroll to Top