Super Hot Boiler MG100 – Service, Repairs & Replacement

Complete Service, Repair & Part Replacement for Super Hot MG100 Boilers in Metro Vancouver

When it comes to hydronic heating systems in British Columbia, the Super Hot MG100 boiler is one of the most trusted and widely installed models. Designed and manufactured in Canada, the MG100 model has earned a reputation for its durability, consistent heat output, and ability to handle the damp, cold climate of the Lower Mainland. Whether you’re heating a detached home in Burnaby, a duplex in Richmond, or a commercial building in Surrey, this boiler is a workhorse that performs reliably year after year.

However, even the most well-built boilers need regular attention to keep operating efficiently—and that’s where ROMA Heating & Cooling comes in. As one of the most experienced HVAC companies in Greater Vancouver, ROMA offers specialized Super Hot MG100 boiler repair, maintenance, diagnostics, and OEM part replacement services, all backed by over 25 years of local expertise.

Overview: The Super Hot MG100 Boiler

The Super Hot MG100 is a mid-efficiency, gas-fired hydronic heating boiler designed for small to mid-size residential and light commercial applications. It provides up to 100,000 BTU/hr of heating capacity, making it suitable for a wide range of home types across British Columbia. The unit is known for:

• Simple mechanical design
• Cast-iron heat exchanger
• Reliable standing pilot or electronic ignition
• Dual water outlet/return configurations
• CSA and ASME-certified components
• Long life expectancy (15–25 years with maintenance)

Many homes built or retrofitted between the early 2000s and 2015 in Metro Vancouver still use the MG100 as their primary heating system. As such, there’s a growing need for qualified boiler technicians familiar with this exact model, especially as units begin to approach the 15–20-year mark.

Super Hot MG100 Boiler Repairs in Metro Vancouver

If your MG100 boiler is underperforming, making strange noises, or simply not heating your home like it used to, ROMA Heating & Cooling offers fast, accurate, and fully guaranteed repair services across all of Metro Vancouver.

Common Issues with the Super Hot MG100 Boiler

Our technicians are trained to diagnose and repair the most frequent issues affecting the MG100, including:

1. No Heat or Intermittent Heating

If your radiators are cold, the issue could be related to the thermostat, circulator pump, ignition system, or internal wiring. MG100s can suffer from aging ignition modules or corroded sensors, which prevent proper firing.

2. Leaking Boiler

Water leaks are often traced to worn seals, cracked pipes, or expansion tank failures. Left unchecked, leaks can cause corrosion, mold, and severe efficiency loss.

3. Unusual Noises

Boilers making banging or gurgling noises may be suffering from air trapped in the system, limescale buildup in the heat exchanger, or a failing pump. Our diagnostic tools help pinpoint the cause quickly.

4. Pilot Light Problems

Older MG100 units with standing pilot lights often experience ignition issues due to drafts, thermocouple failure, or carbon buildup. We can either clean and reset these parts or recommend an ignition module upgrade.

5. Pressure Loss

Chronic pressure drops may indicate an internal leak, a faulty pressure relief valve, or problems with the expansion tank. Low pressure can cause the system to shut down completely.

6. Error Codes and Shutoffs

Some MG100 models are equipped with basic error indicators. We’ll check for fault codes, short cycles, or limit switch trips, and test all electrical and gas safety controls.

Super Hot MG100 Boiler Replacement Parts Available Through ROMA

At ROMA Heating & Cooling, we stock or can order a wide range of OEM and manufacturer-approved replacement parts for the Super Hot MG100 boiler. These parts are essential to keep your system running safely and efficiently.

Most Frequently Replaced MG100 Boiler Components

• Flame Sensors – Detect flame presence and send signals to the control module.
• Ignition Modules – Control spark ignition and flame rectification.
• Thermocouples – Used on pilot-based systems to detect proper lighting.
• Circulator Pumps – Move hot water throughout the home’s baseboards or radiators.
• Aquastats – Maintain water temperature within a safe range.
• Pressure Relief Valves – Prevent system over-pressurization.
• Expansion Tanks – Absorb excess pressure from hot water expansion.
• Gas Valves – Control fuel flow and safety shutdowns.
• Air Vents – Automatically bleed air from the system to prevent hydronic blockages.
• Limit Switches – Shut down the boiler if internal temperatures exceed safe thresholds.
• Control Boards – Monitor, operate, and communicate all boiler functions.

Each of these components plays a crucial role in the safe and efficient operation of your MG100 unit. If any part is defective or failing, it could reduce your system’s efficiency or put your home at risk.

All parts replaced by ROMA come with full installation warranty, and our service vans are stocked with the most common items to reduce downtime.

Comprehensive MG100 Boiler Maintenance Services

Preventative maintenance is key to extending the life of your boiler. For homeowners in Vancouver, North Vancouver, Langley, and other BC cities that experience damp winters, an annual check-up is essential. Our MG100 boiler tune-up service includes:

• Full burner assembly inspection and cleaning
• Flue and venting system analysis
• Combustion testing and CO leak check
• Boiler pressure check and system balancing
• Expansion tank inspection
• Water quality testing (if corrosion is suspected)
• Replacement of worn seals or gaskets
• System flushing (optional, for older systems with debris)

We recommend booking maintenance in September or October, before the heating season begins in full. Regular boiler servicing ensures peak efficiency, reduces heating costs, and helps detect small issues before they become major repairs.

Super Hot MG100 Boiler Installations & Upgrades

If your MG100 is over 20 years old or showing signs of critical failure, it may be time for a boiler replacement. ROMA Heating & Cooling can help you upgrade to a new high-efficiency Super Hot model, or guide you in switching to modern condensing boilers from top brands like Viessmann, Navien, or NTI.

When to Consider Boiler Replacement

• Boiler is 15–25 years old and losing efficiency
• Repeated service calls for the same issue
• You’re upgrading to radiant in-floor heating
• Your heating bills have increased despite no usage changes
• Carbon monoxide readings are near or above safe levels

Our team will evaluate your home’s heating load, review available rebates (e.g., FortisBC boiler rebates), and provide a transparent estimate for your installation.

ROMA’s Super Hot Boiler Services Available Across Metro Vancouver

No matter where you live in the Lower Mainland, ROMA Heating & Cooling is ready to help. We provide same-day Super Hot MG100 boiler services in:

• Vancouver – Emergency repairs, downtown condo retrofits, older home upgrades
• Burnaby – Extensive experience with MG100s in bungalows and duplexes
• Surrey – Boiler tune-ups and part replacements in Newton, Fleetwood, Guildford
• Richmond – Seaside properties with humidity-related corrosion issues
• Coquitlam & Port Coquitlam – Common MG100 replacements in 1990s-era homes
• North & West Vancouver – High-end hydronic systems and radiant zones
• Maple Ridge & Langley – Rural boiler setups and zoning challenges
• Abbotsford & Chilliwack – Hard water issues impacting heat exchangers
• Delta, White Rock & Tsawwassen – Salt-air corrosion management
• New Westminster & Port Moody – Older boiler replacements and modern retrofits

Whether you’re calling from a high-rise in Coal Harbour or a farmhouse in Langley, our licensed boiler technicians arrive fully equipped and ready to restore your heating quickly.

24/7 Emergency Boiler Repairs – No Heat? No Problem.

Boiler breakdowns rarely happen at convenient times. That’s why ROMA offers 24/7 emergency Super Hot boiler repair services across Metro Vancouver. If your MG100 has stopped working on a cold winter night, you can count on us for:

• Immediate dispatch
• Live phone support
• On-site diagnostics
• Temporary heating options (if needed)
• Priority part ordering

If you notice the smell of gas, hear banging noises, or your boiler is leaking water, shut off your system and call ROMA right away at (604) 704-0300.

Why Choose ROMA Heating & Cooling for Super Hot Boiler Services?

• 25+ years of hydronic heating expertise
• Authorized service provider for major boiler brands
• Licensed and insured Red Seal technicians
• Fast, local dispatch from multiple hubs across Metro Vancouver
• Transparent quotes – no hidden fees, no upsells
• Full warranty on all part replacements and labor
• 5-star rated customer service with thousands of happy homeowners

Frequently Asked Questions (FAQs) About Super Hot Boiler Model MG100 Part Replacement and Services in Metro Vancouver

If you own a Super Hot MG100 boiler and are experiencing issues or require routine service, ROMA Heating & Cooling is your trusted HVAC partner across Metro Vancouver. Since 1999, we’ve specialized in boiler repairs, part replacements, and maintenance for Super Hot units, offering 24/7 emergency services and free estimates for homeowners, strata buildings, and commercial clients. Whether your MG100 isn’t heating properly or you need help sourcing replacement parts, our licensed technicians are here to help across Vancouver, Burnaby, Surrey, Richmond, and beyond.

• What is the Super Hot MG100 boiler model commonly used for?
The Super Hot MG100 is a residential mid-efficiency gas-fired boiler commonly used for hydronic heating systems in homes and small commercial buildings throughout Metro Vancouver.

• How do I know if my MG100 boiler needs a part replacement?
Signs include inconsistent heating, banging or whistling noises, low water pressure, error codes, and repeated cycling on and off. If you notice any of these, contact ROMA Heating at (604) 704-0300 for diagnostics.

• Can ROMA Heating replace parts for the Super Hot MG100 boiler?
Yes, we stock and source genuine Super Hot MG100 parts, including ignition modules, gas valves, thermocouples, circulator pumps, and control boards.

• What’s the average lifespan of the MG100 boiler before parts start failing?
Most components last 10–15 years with annual maintenance. However, seals, pumps, and sensors may need replacement every 5–7 years depending on usage and water quality.

• Does ROMA offer same-day part replacement for MG100 boilers?
Yes, in many Metro Vancouver locations we provide same-day boiler part replacement services, especially for common failure items like pressure relief valves and expansion tanks.

• What is the most common part to fail in an MG100 boiler?
The most frequently replaced parts include the thermocouple, flame sensor, circulator pump, and ignition control module due to wear from daily operation.

• Can ROMA help if my MG100 boiler is leaking water?
Absolutely. Leaks are typically caused by failed seals, pressure relief valves, or corrosion. Call ROMA Heating immediately for 24/7 emergency service.

• Is it worth repairing an older Super Hot MG100 or should I replace it?
If the unit is over 20 years old and needs multiple parts, replacement may be more cost-effective. ROMA offers free quotes on high-efficiency boiler upgrades with rebates from FortisBC and CleanBC.

• What kind of warranty does ROMA offer on MG100 part replacements?
We offer a 1-year labor warranty and honor all manufacturer part warranties. OEM parts typically come with a 1–2 year guarantee.

• How much does it cost to replace a gas valve in a Super Hot MG100?
The average cost ranges from $400 to $700, including parts and labor. ROMA offers upfront pricing and free in-home estimates throughout Metro Vancouver.

• Can ROMA fix an MG100 boiler that won’t ignite?
Yes, ignition issues are often linked to the pilot assembly, flame sensor, or control board—all of which we repair and replace quickly.

• Do I need to shut off the MG100 if I notice a burning smell?
Yes, shut it off immediately and call ROMA. A burning smell could indicate electrical issues, overheating, or soot buildup in the combustion chamber.

• Are Super Hot MG100 parts still available in 2025?
Yes, most components are still in production or available through authorized distributors. ROMA Heating sources MG100 parts locally and directly from Super Hot suppliers.

• Does ROMA Heating perform annual MG100 boiler maintenance in Richmond and Burnaby?
Yes, we offer annual maintenance services across all Metro Vancouver cities including Richmond, Burnaby, Coquitlam, and Surrey.

• What’s included in a typical MG100 service visit from ROMA?
A full boiler inspection, combustion analysis, cleaning, pressure check, safety control testing, and replacement of worn parts as needed.

• How often should I replace the expansion tank on an MG100 boiler?
Every 5–7 years is common. If you notice system pressure fluctuations or water leaking from the relief valve, the expansion tank may have failed.

• Can ROMA replace an MG100 boiler in a day?
Yes, we offer next-day or same-day full boiler replacement services. We also handle removal and disposal of your old MG100 unit.

• Is it safe to attempt MG100 repairs myself?
No. Gas boiler repairs should only be done by certified technicians. Improper work can cause gas leaks, carbon monoxide exposure, or system failure.

• What brands can replace an MG100 boiler if it’s beyond repair?
ROMA installs Lennox, Navien, Viessmann, Bosch, and Rinnai boilers—many of which qualify for FortisBC rebates of up to $1,000.

• Why does my MG100 make loud banging noises during operation?
This could be kettling caused by scale buildup or trapped air in the heat exchanger. ROMA can flush your system and inspect for damage.

• How long does it take ROMA to diagnose an MG100 boiler issue?
Our technicians typically identify the problem within 30–60 minutes of arrival using advanced diagnostic tools and industry experience.

• Is my MG100 boiler compatible with a smart thermostat?
In most cases, yes. ROMA can assess compatibility and install smart thermostats like Ecobee or Nest with your boiler system.

• What should I do if my MG100 is showing a low water pressure warning?
This often means the pressure-reducing valve or expansion tank is faulty. Turn off the boiler and call ROMA for an inspection.

• Does ROMA provide service contracts for Super Hot MG100 boilers?
Yes, we offer annual maintenance packages that include priority emergency service, discounts on parts, and annual safety checks.

• What’s the risk of running an MG100 with a faulty flame sensor?
A failed flame sensor can cause the boiler to shut off unexpectedly or fail to ignite, posing a risk of heat loss during cold weather.

• Can ROMA help with MG100 boilers installed in strata buildings or multi-units?
Yes, we specialize in strata HVAC service throughout Greater Vancouver, including shared systems in condos and townhomes.

• What kind of water treatment is recommended for MG100 boilers?
Adding a corrosion inhibitor or using a magnetic filter system helps extend part life, especially in hard-water areas like Surrey and Langley.

• Is there a rebate to replace an MG100 boiler with a high-efficiency model?
Yes, FortisBC offers rebates up to $1,000 for qualified replacements. ROMA can help with the paperwork and eligible model selection.

• Why does my MG100 keep short cycling?
Common causes include a faulty thermostat, pressure switch, or clogged heat exchanger. Call ROMA to troubleshoot and replace components if needed.

• Can a cracked heat exchanger in my MG100 be repaired?
No, cracked heat exchangers are not repairable and pose a safety hazard. ROMA recommends full boiler replacement in these cases.

• How much does a full MG100 diagnostic from ROMA cost?
Diagnostics typically range from $99 to $149. The fee is waived if you proceed with repairs.

• Do you stock MG100 parts in Surrey and Coquitlam?
Yes, we stock many common MG100 parts in local inventory and can source specialty components within 1–2 business days.

• What causes soot buildup inside the MG100 boiler?
Incomplete combustion, dirty burners, or lack of airflow can lead to soot. ROMA provides deep cleaning services during routine maintenance.

• Does ROMA offer 24/7 emergency repair for MG100 boilers in Metro Vancouver?
Yes, we are available day and night for no-heat calls and urgent boiler issues across all areas, including North Vancouver and Delta.

• Can I finance a boiler replacement if my MG100 is too expensive to fix?
Yes, ROMA offers financing options starting as low as $49/month on approved credit.

• What are signs of a failing MG100 thermostat?
Irregular temperature, boiler not turning on/off properly, or unresponsive controls. We install and calibrate thermostats for optimal operation.

• Why does my MG100 shut down randomly at night?
Potential causes include thermostat issues, sensor failure, or gas supply problems. ROMA can run a complete nighttime diagnostics.

• Does ROMA service MG100 boilers in older Vancouver character homes?
Yes, we specialize in retrofitting and maintaining boiler systems in older homes with hydronic radiators or baseboard systems.

• What’s the cost of replacing an MG100 circulator pump?
Expect a range of $300–$600 including parts and labor, depending on pump model and system layout.

• Can ROMA replace just the burner assembly on an MG100?
Yes, burner replacements are a common service and can restore proper combustion if the original is cracked, rusted, or clogged.

• Does ROMA offer Super Hot MG100 service in West Vancouver?
Yes, we proudly serve West Vancouver and the North Shore, including Lions Bay and Deep Cove.

• Can ROMA Heating fix a Super Hot MG100 with no hot water but working heat?
Yes, this often points to a diverter valve, zone valve, or control issue. ROMA can isolate the problem and replace the faulty part for consistent hot water delivery.

• Why is my MG100 boiler producing a humming or vibrating noise?
This could be due to a failing circulator pump, loose motor mount, or buildup of scale inside the heat exchanger. ROMA Heating offers expert diagnostics and part replacement.

• Do MG100 boilers require an annual flush?
While not always required, flushing the system annually helps remove debris and mineral buildup, improving lifespan and performance. ROMA includes flushing in full service calls.

• Can I get parts for my MG100 if it’s over 20 years old?
Yes, many MG100 parts are still available or can be substituted with compatible modern alternatives. ROMA sources OEM and aftermarket parts for older boilers across Metro Vancouver.

• Why does the MG100 pressure gauge keep rising above normal?
This usually indicates a failed expansion tank or pressure relief valve. ROMA can replace these components to prevent dangerous overpressure.

• Is a leaking pressure relief valve on an MG100 dangerous?
It can be. While minor dripping may be safe, continuous leaks can indicate a larger issue. ROMA can test and replace the valve to restore safe operation.

• What’s the typical cost to replace an MG100 flame sensor?
On average, it ranges from $180 to $350, including parts and labor. ROMA Heating offers transparent quotes and quick turnaround.

• Can you install an outdoor temperature reset system on an MG100?
Yes, ROMA can upgrade your MG100 with an outdoor reset control for more efficient operation based on exterior temperatures, especially beneficial in Greater Vancouver’s mild winters.

• Why does my MG100 pilot keep going out?
Common causes include a weak thermocouple, dirty pilot assembly, or draft interference. ROMA can inspect and replace parts to restore stable ignition.

• Do MG100 boilers work well in cold climates like North Vancouver?
Yes, the MG100 is reliable in cooler climates, especially when properly maintained. ROMA Heating ensures it’s calibrated for peak performance in local conditions.

• Can ROMA help me relocate an MG100 boiler during a home renovation?
Yes, we can move and reconfigure MG100 units safely and in accordance with BC building codes and gas regulations.

• Is ROMA Heating certified to service Super Hot boilers?
Yes, our technicians are fully licensed, bonded, and insured to work on all Super Hot boiler models, including MG100 systems.

• What are common error indicators on MG100 boilers?
While MG100 models may not have digital codes, blinking lights or erratic behavior often point to ignition failure, overheating, or low pressure—issues ROMA can quickly diagnose.

• Can ROMA repair wiring or control panel issues on MG100 units?
Absolutely. We handle electrical troubleshooting, board replacements, and wiring repairs for all Super Hot MG100 models.

• Is my MG100 eligible for the CleanBC energy efficiency rebate?
Not directly, but replacing it with a condensing boiler may qualify. ROMA can guide you through rebate options and install qualifying equipment.

• What does a full MG100 boiler tune-up involve?
ROMA’s tune-up includes cleaning burners, inspecting all mechanical parts, checking flue venting, testing safety controls, and adjusting gas pressure.

• How long does an MG100 flame rod last before needing replacement?
Typically 5–8 years depending on usage. A weak flame signal can cause ignition lockout, which ROMA can fix with a flame rod replacement.

• Does ROMA offer priority service for commercial clients with MG100 systems?
Yes, we provide commercial boiler service plans with faster response times, ideal for businesses and multi-unit properties.

• Why is there rust on the casing of my MG100 boiler?
This usually results from condensation, water leaks, or flue gas backdrafting. ROMA can inspect and correct the issue to prevent further corrosion.

• What’s the estimated labor time to replace a MG100 gas valve?
Replacing a gas valve typically takes 1.5 to 2 hours. ROMA technicians provide same-day service in most Metro Vancouver locations.

• Can a dirty MG100 heat exchanger cause carbon monoxide leaks?
Yes, poor combustion from a clogged heat exchanger can lead to CO buildup. ROMA inspects all heat exchangers and provides combustion testing.

• How does ROMA dispose of old MG100 parts?
We follow all local environmental regulations to dispose of worn components, metal, and electronics responsibly.

• Can ROMA retrofit my MG100 with a zone control system?
Yes, we can install zoning valves and thermostats to improve comfort and control in multi-room or multi-level homes.

• What is the recommended water pressure for an MG100 system?
Ideal pressure is between 12 and 15 psi when cold. Fluctuations above 20 psi may indicate a system fault. ROMA can adjust and recalibrate the system.

• Do Super Hot MG100 boilers support radiant in-floor heating?
Yes, the MG100 is compatible with hydronic floor heating loops. ROMA installs and services floor heat systems in condos and houses across Vancouver.

• What’s the advantage of OEM over aftermarket parts for MG100 repairs?
OEM parts are specifically designed for MG100 units and typically offer better longevity and compatibility. ROMA prefers OEM when available.

• Can a clogged air vent cause my MG100 to stop heating?
Yes, trapped air can cause circulation issues and boiler lockouts. ROMA can bleed the system and replace air vents if necessary.

• Does ROMA offer service reminders for annual MG100 maintenance?
Yes, we provide scheduled maintenance reminders and preferred scheduling for service plan members.

• Are there any known recalls for Super Hot MG100 parts?
ROMA monitors all manufacturer bulletins. If a part is recalled, we will notify customers and offer free or discounted replacements when applicable.

• What fuel type does the MG100 boiler use?
The MG100 uses natural gas. It may be converted to propane with a proper kit—ROMA can perform the conversion safely.

• Why does my MG100 cycle on and off every few minutes?
This behavior is often due to a bad thermostat, oversized boiler, or faulty aquastat. ROMA diagnoses short cycling and corrects the root cause.

• Does ROMA offer MG100 service in strata complexes in Coquitlam?
Yes, we frequently work with property managers and strata councils to maintain MG100 boilers in shared heating systems.

• How do I know if my MG100 circulator pump has failed?
Symptoms include cold radiators, no heat despite boiler running, and strange noises from the pump. ROMA can replace it same-day.

• Can ROMA install a new Super Hot MG100 if I want to stick with the same model?
While newer models are more efficient, if you prefer to stay with the MG100, we can install a replacement unit if stock is available.

• What’s the difference between MG100 and MG150 boilers?
The MG150 has a higher BTU output for larger spaces. ROMA can assess your heating needs and recommend the correct model for your home.

• Do MG100 boilers work efficiently with cast iron radiators?
Yes, they are an ideal match for hydronic cast iron systems common in older Vancouver homes. ROMA services these setups frequently.

• Does ROMA offer off-season discounts on MG100 services?
Yes, we offer discounts in spring and summer for maintenance, cleaning, and non-emergency part replacement.

• What causes my MG100 to make gurgling noises?
Gurgling often indicates air trapped in the system. ROMA will bleed radiators and check your air elimination components.

• Why is my MG100 pilot light yellow instead of blue?
A yellow flame can mean incomplete combustion or a dirty burner. This can lead to carbon monoxide risk and should be addressed by ROMA immediately.

• Can ROMA replace the thermostat wiring to my MG100 boiler?
Yes, we can install new wiring, upgrade old thermostats, and rewire controls for reliability and better performance.

• Does ROMA install MG100 boilers in new builds across Metro Vancouver?
While newer models are recommended, we can install MG100s in new homes upon request, especially where matching systems are required.

• What’s the average cost of a complete MG100 boiler overhaul?
A full overhaul can range from $1,000 to $2,500 depending on the number of components replaced. ROMA offers customized quotes and financing.

• Can I schedule MG100 boiler service by email?
Yes, email us at info@romaheating.ca with your location and issue, and we’ll book your service promptly.

• What are common signs of a failing MG100 aquastat?
Erratic heating, delayed boiler starts, or incorrect temperature readings. ROMA Heating stocks and replaces aquastats for MG100 units.

• How long do MG100 pilot assemblies typically last?
Around 10 years with regular maintenance. Corrosion or dirt buildup can cause failure earlier, which ROMA can resolve quickly.

• Can ROMA replace a leaking MG100 backflow preventer?
Yes, backflow prevention devices are part of our plumbing-certified service offering.

• Is zoning possible with an older MG100 system?
Yes, we can add zone valves, zone boards, and multiple thermostats even to older setups to maximize comfort and efficiency.

• How can I tell if my MG100 boiler is undersized for my home?
If rooms aren’t heating evenly or the boiler runs constantly, it may be undersized. ROMA can run heat load calculations to assess this.

• Is the Super Hot MG100 a high-efficiency boiler?
No, the MG100 is mid-efficiency. Replacing it with a condensing unit can save energy and qualify for government rebates.

Book Your Super Hot MG100 Boiler Service Today

Whether your MG100 boiler needs a quick part replacement, a seasonal tune-up, or full system diagnostics, ROMA Heating & Cooling is your trusted partner across Metro Vancouver.

Contact us today to schedule your service:

📞 Call Now: (604) 704-0300
📧 Email Us: info@romaheating.ca
🔗 Or visit our contact page to request a free estimate.

Stay warm, safe, and energy-efficient with ROMA Heating & Cooling—your local boiler experts.