Most strata buildings in British Columbia that heat with gas do so from a single boiler room, and that equipment ages without fanfare. When a council finally looks at the condition, the room is old, the service history is scattered, and the replacement window is both urgent and wide. A successful project comes down to a planning discipline that any well-led building can follow, starting months before the first unit is lifted off the floor.
Step one: understand what you have
The first deliverable is a picture of the present: equipment brand and aged-state, the venting and combustion air arrangement, the size and configuration of the rooms, and the distribution network behind the walls. This is usually produced by an engineering firm or a specialist contractor in a boiler optimization report, and it answers the sizing questions that every later decision depends on. In our experience, buildings that start with a real picture end with a cleaner project than those that start with a catalogue.
Design and selection
Call a licensed ROMA technician — (604) 704-0300
Once the picture exists, the design stage settles what the new system should be: how many units, what configuration, whether to allow for future load changes, and how the system will manage the seasons. This is where trade-offs between cost, reliability, and the building’s demand appear. The design also identifies the venting strategy, since a boiler room replacement often includes a flue upgrade, and the clearance and access paths for service.
Permits and approvals
Gas boiler replacements are regulated work in BC, and permits are part of the timeline rather than paperwork at the end. The contractor arranges the gas permit, works with the local authority for the interior mechanical changes, and aligns the power and exhaust-related requirements with the applicable work. The strata council should expect permit inspection windows, and the schedule should account for them. Build the permit into the timeline, not on top of it.
Communication with owners
The boiler room sits in a building full of people whose routines depend on it. Prepare a simple plan: what is happening, what the owners will notice, and what the service windows look like. Domestic hot water interruptions may be needed during the changeover, and walking the building through the sequence beforehand is usually the difference between an annoyed building and an informed one. Councils should also decide in advance how shared costs are communicated per their bylaws.
Phasing the work
Replacement is rarely one long shutdown. A standard approach keeps the existing system running and stages the new units, or takes advantage of mild seasons to change the system over in phases. The mechanical room layout drives this: some rooms accept replacement units beside the old ones, others need a window of full shutdown. The contractor’s schedule should show the shutdown windows precisely, and the council should confirm the plan fits the building’s occupancy.
Commissioning and handover
Before the room is closed, the new system is commissioned: firing tests, control verification, venting checks, safety system validation, and documentation. The building then receives the maintenance manuals, the schedule of routine checks, and the training for the operators who will run the room day to day. In our experience the final commissioning visit is the moment the project’s quality is actually proven, and owners notice the difference from the first heat cycle.
Ready to book? Get a free estimate from ROMA.
Learn more about ROMA’s related services.
Send us a photo of the rating plate and we’ll read it for you
ROMA Heating & Cooling has served Metro Vancouver since 1999 — TSBC-licensed (Gas LGA0202903), bonded & insured, 4.8★ from 221 Google reviews. Upfront flat-rate pricing, free estimates on installs, no hidden fees.
Frequently Asked Questions
How far ahead should a strata plan a boiler replacement?
The planning work should start a season or more before the installation, since the engineering study, the design, the permit, and the procurement sequence all take time. Starting early gives the council the density of preparation rather than the pressure of the date, and lets the project take the calm route rather than the emergency one.
Who should lead the project for the strata?
Typically the council directs, an engineering consultant or a contractor with depth in boiler systems advises, and the property manager coordinates owners and records. The trio works best when the council establishes decision authority early. A single skilled point of contact for the mechanical work keeps the communication straight.
Will domestic hot water be affected during replacement?
In most projects, the hot water service is protected by phasing the changeover, though some buildings accept a planned interruption window. The plan should state the expected outages in advance, so residents can prepare. The building size and the room layout decide the details; every project is scheduled around the residents’ needs.
What does boiler room replacement cost?
The cost depends on the building size, the system design, the room access, and the venting work required, so quotes are per-project rather than uniform. The budgeting starts with the engineering report and the design, and a clear vendor scope allows the strata to compare options on a like-for-like basis before committing.
Should the strata replace the whole system or just repair?
The answer is per building. Repairs can extend the life of a sound system, while replacement is justified when the major components are at the end of their service, parts are no longer supported, or safety and reliability concerns stack up. The engineering review provides the technical basis for the decision a council needs to make.
Reviewed by the ROMA Heating & Cooling team — TSBC-licensed gas contractor (Gas LGA0202903), serving Greater Vancouver since 1999. Updated September 2026.
What Greater Vancouver Homeowners Say
“Nelson worked hard to get the NTI unit fixed. He was always polite, courteous and on time.”
“As always Nelson was super efficient. Showed up on time and was quick to work. I had a full maintenance done on the fireplaces and furnace. He was awesome. I won’t use anyone else.”
“Excellent service. Andy had a spare Carrier inducer with him which saved us time.”
“Was very prompt to respond to our issues. Technician was scheduled for the day following my initial call.”
“Very professional heating company. Price is reasonable, excellent work.”
“Highly recommend this company. It was a pleasure dealing with Shawn and Nelson.”
“Professional and courteous technicians with attention to detail and customer needs.”
“Always great, friendly service. Serviced the hot water on-demand system. Honest and informative. Thanks!”
“Speedy response time, honest, and professional service from start to finish.”
Why Greater Vancouver Trusts ROMA Heating & Cooling
ROMA Heating & Cooling has installed, repaired and maintained heating and cooling systems across Metro Vancouver since 1999. Our team are TSBC-licensed gas fitters (Gas LGA0202903) and Red Seal-trained technicians — licensed, bonded and insured — and we back every job with upfront, flat-rate pricing and a 100% satisfaction guarantee. We hold a 4.8★ rating from 221+ Google reviews.
- Authorized for 30+ brands (Lennox, Carrier, Viessmann, Navien, Rheem & more)
- Upfront flat-rate pricing — no overtime or hidden fees
- Free, no-obligation estimates on new installations
- Locally owned & operated in Burnaby, BC
No Hidden Fees
Our service rates are transparent and easy to understand. You approve upfront, flat-rate pricing before we start — so you never get a bill you didn’t expect.
Licensed & Bonded
ROMA is a TSBC-licensed gas contractor (Gas LGA0202903). Our technicians are bonded, insured and Red Seal-trained — qualified for any heating or cooling system.
Free Estimates
We offer free, no-obligation estimates on new installations — furnaces, boilers, heat pumps, air conditioners, tankless and hot-water tanks.
