Spring is the reset button for a gas-heated home in British Columbia. The furnace has made its stand through the cold months, the boiler has carried the hydronic loads, and the water heater has run without complaint. As the season turns, a fifteen-station routine keeps the gas systems healthy and catches the small items before they become autumn problems. The list below is the one we hand BC homeowners every spring, split into what you can do and what stays with a licensed technician.
Start with the filters and airflow
Filters are the most relied-upon and most forgotten component. A clogged filter makes the furnace work harder for the same heat output, and a clean one is a small weekly habit with a large seasonal return. Check the filter after the season ends, clear the return air grilles and the furnace closet floor, and pull any debris or pet hair out of the area around the cabinet. Storage and cardboard can crowd the equipment; give it a spring clean.
Venting and outdoor terminations
Call a licensed ROMA technician — (604) 704-0300
While the weather is agreeable, walk the property and look at the vents that exit the wall or roof. Leaves, nests, and construction debris can land on a vent termination over the winter and shorten the air flow the appliance needs. A vent that has visibly shifted should be checked by a technician, as should anything with bird activity. The interior flue is a spring inspection item for the professional: joints, clearances, and the overall path are reviewed during the yearly service.
Detectors: the spring testing ritual
Carbon monoxide alarms and smoke alarms deserve a spring test of their own. Press the test button, verify the model’s expiry or service date, and confirm the detectors are in the rooms the code suggests: near sleeping areas and on each floor. If a detector is past its serving date, replace it. A gas appliance and an aged detector are a combination no one should live under.
Thermostat and controls
Spring is a tidy moment to refresh the thermostat schedule for the months ahead, confirm the temperature is reading sensibly across the home, and, if the unit is smart, review the season’s runtime data while it is fresh. If the furnace has behaved oddly at any point during winter, write it down now: a note about a delayed start, cycling, or unusual noise becomes a much better diagnosis if the technician sees the history at the fall service.
Water heater housekeeping
The gas water heater lives through the cold season quietly, and its spring needs are minimal: check the area around the tank for moisture, look at the vent connection and combustion air at the base, and have the tank drained of sediment or the condensate and burner sequence checked during a professional visit, depending on the type. Neither task is a do-it-yourself project for a homeowner; both fit easily into a spring service appointment.
Book the seasonal service
The single most valuable spring action is the yearly tune-up: burner, gas pressure, ignition, venting, and controls all get examined while the demand is low. For households with both a furnace and a water heater, these are best paired. Spring service also means the technician sees the equipment before the calendar turns, so any worn part is known and planned for ahead of the winter.
Leave the gas work to the professionals
Everything touching the gas supply, the burner, the heat exchanger, or the venting is outside homeowner DIY, and that is a good thing. The steps above cover the accessible side of the home, and a licensed technician handles the rest. Call us and we will do the gas side properly, with the seasonal report you can plan the year around.
Ready to book? Get a free estimate from ROMA.
Learn more about ROMA’s related services.
Send us a photo of the rating plate and we’ll read it for you
ROMA Heating & Cooling has served Metro Vancouver since 1999 — TSBC-licensed (Gas LGA0202903), bonded & insured, 4.8★ from 221 Google reviews. Upfront flat-rate pricing, free estimates on installs, no hidden fees.
Frequently Asked Questions
How much of the spring maintenance can I do myself?
Filter swaps, clearing the area around the furnace, and testing alarms are safely in the homeowner’s hands. The burner, gas pressure, venting, and heat exchanger work all stay with a licensed technician. A yearly professional service on the gas equipment completes the routine, and it handles everything the checklist marks as technician-grade.
Why maintain gas systems in spring instead of fall?
Spring is quieter for service demand, which makes scheduling easier and the visit more thorough. It also lets a worn or questionable part be discovered and replaced at a relaxed pace. The inspection settles the state of the equipment in spring, so the fall is a known quantity rather than a first cold-snap surprise.
Should I shut off my gas furnace's pilot in summer?
Whether a pilot can be shut follows the model and the manufacturer’s guidance, and shutting it without reading the specific instructions risks confusion with valves and functions. While the summer switch is optional for many homes, a professional can explain the exact sequence for your equipment or simply handle it during the spring service.
How often should CO alarms be replaced?
Detectors carry a service life, typically shown on the unit itself, after which the sensor response can degrade. Check the manufacturer’s date on each unit and replace accordingly. The annual spring test is the right moment to read the labels, and any alarm past its date should be replaced before the next heating season starts.
Does spring maintenance help my water heater too?
Yes. The water heater is a gas appliance in the same home and benefits from the same eyes. A spring visit checks venting, sediment, burner performance, and temperature settings. It also identifies the early signs of tank wear long before an inconvenience follows, and the entire visit fits neatly in one appointment.
Reviewed by the ROMA Heating & Cooling team — TSBC-licensed gas contractor (Gas LGA0202903), serving Greater Vancouver since 1999. Updated September 2026.
What Greater Vancouver Homeowners Say
“Nelson worked hard to get the NTI unit fixed. He was always polite, courteous and on time.”
“As always Nelson was super efficient. Showed up on time and was quick to work. I had a full maintenance done on the fireplaces and furnace. He was awesome. I won’t use anyone else.”
“Excellent service. Andy had a spare Carrier inducer with him which saved us time.”
“Was very prompt to respond to our issues. Technician was scheduled for the day following my initial call.”
“Very professional heating company. Price is reasonable, excellent work.”
“Highly recommend this company. It was a pleasure dealing with Shawn and Nelson.”
“Professional and courteous technicians with attention to detail and customer needs.”
“Always great, friendly service. Serviced the hot water on-demand system. Honest and informative. Thanks!”
“Speedy response time, honest, and professional service from start to finish.”
Why Greater Vancouver Trusts ROMA Heating & Cooling
ROMA Heating & Cooling has installed, repaired and maintained heating and cooling systems across Metro Vancouver since 1999. Our team are TSBC-licensed gas fitters (Gas LGA0202903) and Red Seal-trained technicians — licensed, bonded and insured — and we back every job with upfront, flat-rate pricing and a 100% satisfaction guarantee. We hold a 4.8★ rating from 221+ Google reviews.
- Authorized for 30+ brands (Lennox, Carrier, Viessmann, Navien, Rheem & more)
- Upfront flat-rate pricing — no overtime or hidden fees
- Free, no-obligation estimates on new installations
- Locally owned & operated in Burnaby, BC
No Hidden Fees
Our service rates are transparent and easy to understand. You approve upfront, flat-rate pricing before we start — so you never get a bill you didn’t expect.
Licensed & Bonded
ROMA is a TSBC-licensed gas contractor (Gas LGA0202903). Our technicians are bonded, insured and Red Seal-trained — qualified for any heating or cooling system.
Free Estimates
We offer free, no-obligation estimates on new installations — furnaces, boilers, heat pumps, air conditioners, tankless and hot-water tanks.
