Rheem is one of the most widely installed hot water tank brands in North America, and in Metro Vancouver the name shows up in everything from 1970s basements to new builds. The reason is simple: the product line spans the two ways households heat water with gas, and the brand is stocked everywhere. This overview looks at the gas family in general terms — what each type does, what it suits, and how the install is handled here in BC.
Storage tank models: the workhorse family
Storage tanks hold a reservoir of hot water inside the home’s own heated envelope, sized so the household can pull more than it uses at breakfast. They suit most homes, installs quickly where a flue is available, and cost less at the wall than their counterparts. Rheem‘s storage family includes standard models and low-emission versions with advance burner and flue designs. All are still tanks: same maintenance idea, well-documented service, and an easy replacement path when a unit ages out.
Tankless models: the space-saving family
Call a licensed ROMA technician — (604) 704-0300
Rheem also builds tankless gas units that mount on the wall and heat water only while it flows. They suit homes where the tank’s footprint and its standby are both unwanted, and where the gas supply can serve a burner ramping to the load. Tankless units never run out of hot water in the strict sense, because they answer demand as it comes — though performance depends on the unit’s rating being matched to the fixtures, and the install must be vented to code.
What suits a given home
Start with the family question, not the model: a family of five up to a busy schedule tends toward a tank or a matched tankless; a two-person household with a basement tank that works fine usually just wants an upgrade of the same family. Homes with limited floor space, or a family that values instant occupancy toward the last shower, lean tankless. Homes replacing a tank in the same location favor a tank.
The installation side is the honest half of the decision
Every gas hot water unit is regulated work. The gas connection is pressure-tested and vented — the flue run, the combustion air, the shutoff and the appliance clearances all live inside the same installation. A licensed gas technician confirms the meter and supply can serve the unit, matches the unit to the vent available, and swaps the old unit as part of install. For a tankless upgrade, the vent path may need changes — which is exactly the work the quote should mention.
Service and maintenance
Both families need the standard gas service rhythm: anode and tank checks on storage units, burner and vent inspection, and carbon monoxide verification at the flue. Tankless units add the heat exchanger check and, on some units, a heat exchanger flush — but our guidance has no specific interval; the technician inspects at the annual visit and books the maintenance accordingly. Either way, the service history is the best predictor of a unit’s future.
Buying with a service plan in mind
Rheem’s dealer network serves the region, and the gas fitter who installs your unit should also be the one who services it — continuity matters more than the brand badge, especially on a tankless wall-mount where access under stairs is tight. Ask your technician about local support, parts availability and the service interval, then buy the unit that fits your home, not the one with the loudest label.
Ready to book? Get a free estimate from ROMA.
Learn more about ROMA’s related services.
Send us a photo of the rating plate and we’ll read it for you
ROMA Heating & Cooling has served Metro Vancouver since 1999 — TSBC-licensed (Gas LGA0202903), bonded & insured, 4.8★ from 221 Google reviews. Upfront flat-rate pricing, free estimates on installs, no hidden fees.
Frequently Asked Questions
Which is better, a Rheem tank or tankless?
Neither is universally better — they fit different homes. A tank suits a standard basement location, a smaller gas supply and a simple flue; tankless suits limited floor space and high-draw households, with a wall-mounted footprint and on-demand output. The honest answer comes from your gas supply rating and usage, not the label.
Do Rheem tankless units work with existing gas line?
Usually the existing line can serve a properly sized unit, and gas pressure is verified at install. If the pipe run is long or the meter is shared, a technician may recommend a larger line. The install quote verifies supply and venting first, then sizes the unit to the house.
How long do Rheem hot water tanks last?
Tanks commonly run a decade or more with annual service, though the protected interior depends on how the anode wears with the measured water. Tankless units with service often outlast tanks. What is more reliable: regular service and a documented history.
Are Rheem tanks good for a rental or strata?
They are common in strata risers and rental units because parts are available and the install is standard, which matters when a property manager schedules a change-out at a tenant’s convenience. Confirm the vent and clearance suits the mechanical room, and note the service schedule in the file.
What size Rheem tank do I need?
Sizing is about the peak draw, not the family count alone: the shower, dishwasher and laundry concurrent use tell the story. A technician sizes the unit to the fixtures rather than guessing by family size, and the written quote states the model and the rationale.
Reviewed by the ROMA Heating & Cooling team — TSBC-licensed gas contractor (Gas LGA0202903), serving Greater Vancouver since 1999. Updated September 2026.
What Greater Vancouver Homeowners Say
“Nelson worked hard to get the NTI unit fixed. He was always polite, courteous and on time.”
“As always Nelson was super efficient. Showed up on time and was quick to work. I had a full maintenance done on the fireplaces and furnace. He was awesome. I won’t use anyone else.”
“Excellent service. Andy had a spare Carrier inducer with him which saved us time.”
“Was very prompt to respond to our issues. Technician was scheduled for the day following my initial call.”
“Very professional heating company. Price is reasonable, excellent work.”
“Highly recommend this company. It was a pleasure dealing with Shawn and Nelson.”
“Professional and courteous technicians with attention to detail and customer needs.”
“Always great, friendly service. Serviced the hot water on-demand system. Honest and informative. Thanks!”
“Speedy response time, honest, and professional service from start to finish.”
Why Greater Vancouver Trusts ROMA Heating & Cooling
ROMA Heating & Cooling has installed, repaired and maintained heating and cooling systems across Metro Vancouver since 1999. Our team are TSBC-licensed gas fitters (Gas LGA0202903) and Red Seal-trained technicians — licensed, bonded and insured — and we back every job with upfront, flat-rate pricing and a 100% satisfaction guarantee. We hold a 4.8★ rating from 221+ Google reviews.
- Authorized for 30+ brands (Lennox, Carrier, Viessmann, Navien, Rheem & more)
- Upfront flat-rate pricing — no overtime or hidden fees
- Free, no-obligation estimates on new installations
- Locally owned & operated in Burnaby, BC
No Hidden Fees
Our service rates are transparent and easy to understand. You approve upfront, flat-rate pricing before we start — so you never get a bill you didn’t expect.
Licensed & Bonded
ROMA is a TSBC-licensed gas contractor (Gas LGA0202903). Our technicians are bonded, insured and Red Seal-trained — qualified for any heating or cooling system.
Free Estimates
We offer free, no-obligation estimates on new installations — furnaces, boilers, heat pumps, air conditioners, tankless and hot-water tanks.
