ROMA Heating & Cooling handles this across Greater Vancouver every day.
The first sign is usually sound. A radiator that gurgles when the heat comes on, a pump that has started to sound like it is chewing, a whooshing at the boiler that was not there last winter. Air that has found its way into the heating water is behind a large share of these complaints, and it rarely stays put: bubbles travel with the flow, collect at high points, and block the circulation that delivers heat. On a system where Resideo controls handle zoning and temperature, the controls can be functioning perfectly while the water itself is the problem. That is the gap the air separator fills — a component whose only job is to get air out of the loop and keep it out.
Where does air in a heating system come from?
A closed loop sounds like it should stay sealed, but air gets in through several doors. Fresh fill water carries dissolved gas. Water that is topped up regularly brings a fresh supply of it. Small inward leaks at fittings and valves let air slip past. And as water heats, some of the gas dissolved in it comes out of solution, forming bubbles at hot spots where they are least welcome. An air separator gives the moving water a place to slow down and change direction so bubbles can gather and rise, where a vent releases them. Without that step, the air simply finds a new place to sit.
How does a separator fail?
Call a licensed ROMA gas technician — (604) 704-0300
Gradually, and without moving parts to blame. Internal surfaces accumulate magnetite and sludge until the unit no longer gives bubbles a clean path to the vent. The vent on top can clog, weep, or fail to close, so air collects but never leaves. Seams and threaded connections can develop slow leaks that appear as mineral staining. On designs that use internal media to encourage tiny bubbles to merge, that material can block or degrade. Sometimes the separator is fine and the system is simply taking on too much fresh water, which means the device is fighting a losing battle. The symptoms — recurring noise, repeated bleeding, uneven heat — are what bring it to light.
| Clue | What it suggests | How a technician confirms it |
|---|---|---|
| Gurgling returns days after bleeding | Air is still entering or not being released | Vent function and separator condition reviewed |
| Pump noise like gravel | Bubbles reaching the pump inlet | Inlet conditions and system pressure checked |
| Heat uneven across floors | Trapped air restricting flow | Temperature survey at emitters and ports |
| Mineral crust on the unit | Slow leak at a seam or fitting | Visual inspection under operating pressure |
| System needs water often | Fresh water introducing new air | Fill, expansion, and leak checks |
What does a technician look at?
The air side is examined as a group, because the separator, vent, expansion tank, fill valve, and controls all influence one another. The technician confirms the pump is moving water, then watches where air is collecting and whether the separator and its vent are doing their jobs. System pressure is measured, since a tank that has lost its charge or a fill valve that creeps changes how much fresh water enters the loop, and fresh water brings fresh air. The technician may also check whether the system holds pressure over time, because a slow leak elsewhere keeps the air problem alive no matter how well the separator performs.
What does replacement involve?
Swapping a separator is a scheduled job rather than an emergency, which gives the technician time to plan the pipework. The section is isolated, drained only as needed, and the new unit is fitted so flow direction and venting match the system’s design — a separator mounted where it cannot release air will not fix anything, no matter how good the part is. Once the loop is purged and pressure restored, the technician watches it through a heating cycle to confirm the gurgling and cold spots are gone. If the system keeps shedding magnetite, the replacement deserves a water quality conversation alongside it.
Could the controls be responsible instead?
They can, and the overlap is real. A Resideo control that is misconfigured, a thermostat that never calls, or a zone that does not open can leave rooms cold in ways that look like air problems. Pump noise can come from a failing circulator rather than bubbles. That is why a technician tests both the water side and the control side before concluding anything. On a well-controlled system, the two should agree: controls call, pumps run, water moves, rooms warm. When they do not, the point of disagreement is the fault.
How does air control fit into service?
It belongs on the annual checklist. A technician can check vent operation, look for weeping, review pressure behaviour, and confirm the loop is not taking on fresh water. Those checks are quick and catch the small issues that grow into noisy pumps and cold rooms over a season. If you ever smell gas in the home, leave the building and call your gas utility’s emergency line and 911 from outside before anything else — that step always comes first.
Tell us what you have — the brand, the model, and what it’s doing — and we’ll come back with the honest picture. Call ROMA Heating & Cooling at (604) 704-0300, or book a visit online. Air-side work often pairs with boiler repair, and a seasonal inspection keeps the loop in tune.
Need a licensed gas technician in Greater Vancouver?
ROMA Heating & Cooling has served Metro Vancouver since 1999 — TSBC-licensed (Gas LGA0202903), bonded & insured, 4.8★ from 221 Google reviews. Upfront flat-rate pricing, free estimates on installs, 0% financing (OAC), no hidden fees, 7 days a week.
Frequently Asked Questions
Why do my radiators keep gurgling after I bleed them?
Bleeding removes the air that has already collected, but it does not stop new air from arriving. If the gurgling returns, either the separator and vent are not releasing air effectively, or the system is taking on fresh water that carries dissolved gas. Finding which of those is happening requires looking at the whole air side.
Does a Resideo control have anything to do with air in the system?
No. Controls manage temperature and zoning, while air is a water-side condition. A system can be perfectly controlled and still full of air. That said, control problems and air problems can produce similar comfort complaints, which is why a technician checks both before naming a cause.
How can I tell if my air separator is fouled?
There is no homeowner test that settles it. Recurring gurgling, pump noise, and uneven heat are the clues, and they overlap with other faults. A technician checks vent operation, system pressure, and circulation behaviour to determine whether the separator is the source or merely nearby when the real problem occurs.
What causes a system to keep pulling in fresh water?
A weeping fitting, a relief valve that discharges, or a fill valve that creeps can all add water over time. Every addition brings dissolved air. That is why recurring air problems are investigated at the source rather than treated with repeated bleeding. Stopping the water loss is half the repair.
Is it worth replacing an old air separator?
When a unit is fouled internally, leaking at a seam, or no longer giving bubbles a clean path to the vent, replacement is often the practical answer. The decision follows an inspection rather than age alone. On a system with magnetite problems, water quality work should accompany the new separator.
Reviewed by the ROMA Heating & Cooling team — TSBC-licensed gas contractor (Gas LGA0202903), serving Greater Vancouver since 1999. Updated September 2026.
What Greater Vancouver Homeowners Say
“Nelson worked hard to get the NTI unit fixed. He was always polite, courteous and on time.”
“As always Nelson was super efficient. Showed up on time and was quick to work. I had a full maintenance done on the fireplaces and furnace. He was awesome. I won’t use anyone else.”
“Excellent service. Andy had a spare Carrier inducer with him which saved us time.”
“Was very prompt to respond to our issues. Technician was scheduled for the day following my initial call.”
“Very professional heating company. Price is reasonable, excellent work.”
“Highly recommend this company. It was a pleasure dealing with Shawn and Nelson.”
“Professional and courteous technicians with attention to detail and customer needs.”
“Always great, friendly service. Serviced the hot water on-demand system. Honest and informative. Thanks!”
“Speedy response time, honest, and professional service from start to finish.”
Why Greater Vancouver Trusts ROMA Heating & Cooling
ROMA Heating & Cooling has installed, repaired and maintained heating and cooling systems across Metro Vancouver since 1999. Our team are TSBC-licensed gas fitters (Gas LGA0202903) and Red Seal-trained technicians — licensed, bonded and insured — and we back every job with upfront, flat-rate pricing and a 100% satisfaction guarantee. We hold a 4.8★ rating from 221+ Google reviews.
- Authorized for 30+ brands (Lennox, Carrier, Viessmann, Navien, Rheem & more)
- Upfront flat-rate pricing — no overtime or hidden fees
- Free, no-obligation estimates on new installations
- Locally owned & operated in Burnaby, BC
No Hidden Fees
Our service rates are transparent and easy to understand. You approve upfront, flat-rate pricing before we start — so you never get a bill you didn’t expect.
Licensed & Bonded
ROMA is a TSBC-licensed gas contractor (Gas LGA0202903). Our technicians are bonded, insured and Red Seal-trained — qualified for any heating or cooling system.
Free Estimates
We offer free, no-obligation estimates on new installations — furnaces, boilers, heat pumps, air conditioners, tankless and hot-water tanks.
