ROMA Heating & Cooling handles this across Greater Vancouver every day.
Floor-standing boilers have a way of looking interchangeable. Same footprint, same jacket color, same arrangement of pipes — and yet the internals can differ enough that a burner part or a control board from one will not suit another. The Peerless model string on the jacket plate is what separates them, and reading it fully is the first step in any repair or replacement conversation. A complete string also saves the supplier a phone call.
Where does Peerless print the model number?
The rating plate usually sits on the jacket — front, side, or near the burner — and pairs the model string with a serial identifier, input ratings, and certification marks. On older units, the plate may be on the rear jacket or behind a removable panel. Some models repeat the label on the base or near the controls. Photograph the whole plate rather than transcribing one line, because suffixes and revision characters matter.
Which components depend on the exact model?
Call a licensed ROMA gas technician — (604) 704-0300
More than most owners expect. Boiler parts are approved as pieces of a certified assembly, and that list includes:
- Burners and ignition components: matched to the gas train.
- Controls and aquastats: matched to the control generation.
- Circulators and zone valves: specified per configuration.
- Gaskets and seals: sized for the section assembly.
- Venting components: approved for the installation type.
What should be sent for a lookup?
Send the identifiers and enough context to confirm the unit in one pass: the full model string, the serial, one full-frame plate photo, one close-up, and a wide shot of the boiler and its piping. Note whether the boiler is natural gas or propane and how it is vented, because those details follow the configuration.
How should the plate be photographed?
Angle the light across the plate instead of pointing a flash at it, then shoot square-on for the full frame and move in for the identifier fields. On older, dull plates, a slight tilt often reveals stamping better than a straight-on shot. Never scrub the plate or remove the jacket to improve the angle — a technician can capture the details safely if they are not visible from outside.
| Label location | Owner access | What to capture |
|---|---|---|
| Front or side jacket | Safe to view when cool | Full model and serial fields |
| Near the burner | Safe to view | Input rating details |
| Rear jacket | May be awkward | Photograph from the side |
| Behind a panel | Not owner territory | Leave to a technician |
What if the plate is corroded?
Resist every urge to polish or scrape it — corrosion removal takes the stamped characters with it. Capture whatever survives and collect the documents that identify the boiler: the invoice, permit, startup record, or an old service invoice. Under better light, a technician may still recover the stamping, and the manufacturer can sometimes match a partial serial plus the address to a model.
How does ROMA confirm the match?
Your photos and the installation context go to the manufacturer or its distributor, who verify the model version and whether the part is still in production. When a component has been superseded, the current guidance determines what is approved. That check keeps a boiler repair from turning into trial and error, and it saves a second appointment.
What about burner and control parts?
They are the most model-sensitive components on the boiler, and the ones most tempting to match by appearance. Burner orifices, ignition modules, and control boards are validated for specific configurations, and a near-match can create performance problems or safety concerns. The plate, not the photo of a similar boiler, drives these orders. Keep the plate photos with the service file so the next order starts from facts.
What safety rules apply around a boiler?
Should gas be detected, the household leaves together before the gas emergency line is called, with 911 to follow from outside. A carbon monoxide alarm means an immediate exit and a 911 call. Label photography is fine for owners once the boiler is cool; covers, gas piping, and internal parts are not.
ROMA Heating can identify the boiler, check that the component still exists, and install the correct one with the paperwork to prove it. The boiler service page sets expectations, maintenance keeps things current, and booking starts the parts conversation. Tell us what you have — the brand, the model, and what it’s doing — and we’ll come back with the honest picture. Call (604) 704-0300 to begin the search.
Learn more about ROMA’s related services.
Need a licensed gas technician in Greater Vancouver?
ROMA Heating & Cooling has served Metro Vancouver since 1999 — TSBC-licensed (Gas LGA0202903), bonded & insured, 4.8★ from 221 Google reviews. Upfront flat-rate pricing, free estimates on installs, 0% financing (OAC), no hidden fees, 7 days a week.
Frequently Asked Questions
Is the model number on the outside of a Peerless boiler?
Usually it is on the jacket — front, side, or near the burner — which makes it readable from outside once the boiler is cool. Older models sometimes place the plate on the rear jacket or behind a panel. If you cannot see it without removing something, note that for the technician rather than opening the unit yourself.
Can I order a Peerless part using the series name?
No. Series names group several configurations, and components are validated against the exact model and revision. A part that fits one configuration may not be approved for another, even when the boilers look identical. The full model string, and often the serial, is what a supplier needs to match the component correctly.
What if the data plate is rusted?
Do not sand or scrape it — that can destroy the stamped characters along with the corrosion. Photograph what is visible and gather the installation records that name the unit. A technician may read shallow stamping under angled light, and the manufacturer can sometimes confirm the boiler from a partial serial and the address.
Where do I find the boiler's efficiency rating?
Model strings often hint at the series and configuration, but efficiency ratings come from the manufacturer’s documentation for that specific unit, not from decoding the string. If efficiency matters for a rebate, a comparison, or a replacement decision, confirm it with the manufacturer or during a licensed assessment.
How do I find the model number if the manual is gone?
The rating plate on the boiler is the primary source, and a duplicate label may sit on the base or near the controls. Past invoices, permits, and service records often name the model as well. If nothing is readable, a licensed technician can identify the family from the burner and controls, and the manufacturer may confirm from the serial.
Reviewed by the ROMA Heating & Cooling team — TSBC-licensed gas contractor (Gas LGA0202903), serving Greater Vancouver since 1999. Updated September 2026.
What Greater Vancouver Homeowners Say
“Nelson worked hard to get the NTI unit fixed. He was always polite, courteous and on time.”
“As always Nelson was super efficient. Showed up on time and was quick to work. I had a full maintenance done on the fireplaces and furnace. He was awesome. I won’t use anyone else.”
“Excellent service. Andy had a spare Carrier inducer with him which saved us time.”
“Was very prompt to respond to our issues. Technician was scheduled for the day following my initial call.”
“Very professional heating company. Price is reasonable, excellent work.”
“Highly recommend this company. It was a pleasure dealing with Shawn and Nelson.”
“Professional and courteous technicians with attention to detail and customer needs.”
“Always great, friendly service. Serviced the hot water on-demand system. Honest and informative. Thanks!”
“Speedy response time, honest, and professional service from start to finish.”
Why Greater Vancouver Trusts ROMA Heating & Cooling
ROMA Heating & Cooling has installed, repaired and maintained heating and cooling systems across Metro Vancouver since 1999. Our team are TSBC-licensed gas fitters (Gas LGA0202903) and Red Seal-trained technicians — licensed, bonded and insured — and we back every job with upfront, flat-rate pricing and a 100% satisfaction guarantee. We hold a 4.8★ rating from 221+ Google reviews.
- Authorized for 30+ brands (Lennox, Carrier, Viessmann, Navien, Rheem & more)
- Upfront flat-rate pricing — no overtime or hidden fees
- Free, no-obligation estimates on new installations
- Locally owned & operated in Burnaby, BC
No Hidden Fees
Our service rates are transparent and easy to understand. You approve upfront, flat-rate pricing before we start — so you never get a bill you didn’t expect.
Licensed & Bonded
ROMA is a TSBC-licensed gas contractor (Gas LGA0202903). Our technicians are bonded, insured and Red Seal-trained — qualified for any heating or cooling system.
Free Estimates
We offer free, no-obligation estimates on new installations — furnaces, boilers, heat pumps, air conditioners, tankless and hot-water tanks.
