If your Pacific Energy gas fireplace or stove won’t light reliably, the flame pattern looks off, the glass is fogging or staining, or the blower or remote isn’t working the way it should, it’s worth having a licensed technician look at the actual unit rather than guessing at the cause. ROMA can give your specific fireplace or stove that look.
ROMA Heating & Cooling has served Metro Vancouver out of our Burnaby shop since 1999, and Pacific Energy gas units are a familiar sight for us — as a BC-based manufacturer, Pacific Energy has a long-standing presence in homes across the region, from freestanding gas stoves in older character properties to built-in inserts in newer construction. A technician who knows this brand’s typical burner layout and pilot assembly can usually get to the actual cause of a problem faster than someone unfamiliar with it. Whatever your Pacific Energy unit is doing, a ROMA technician can look at it directly and tell you honestly what’s going on.
Common Issues ROMA Sees with Pacific Energy Units
The most common call we get is a pilot or ignition system that won’t hold a flame — the unit lights and then shuts back down within seconds, which usually points to a thermocouple or thermopile no longer producing a strong enough signal, though a dirty pilot orifice or draft issue can produce a similar symptom. A flame that’s noticeably shorter, yellow, or lazy compared to how the unit used to burn often traces back to a partially restricted burner or a combustion air problem. Glass that’s fogging, staining, or collecting a soot film is worth taking seriously on a gas appliance, since it typically points to a combustion issue rather than something purely cosmetic. Blower motors that have gone noisy or stopped moving air, and remote controls or wall switches that no longer respond, round out the issues we see most often on Pacific Energy gas fireplaces and stoves, particularly on freestanding units that have run for many seasons without a professional inspection.
What a ROMA Technician Checks First
📞 Talk to a licensed ROMA Pacific Energy equipment technician — (604) 704-0300
On a first visit, we check whether the pilot lights and holds, the physical condition and position of the thermocouple or thermopile, the burner flame pattern with the glass removed, and the seating and seal of the glass panel itself. We also check the venting termination point outside the home, since a partially blocked or damaged vent cap affects combustion quality just as much as anything inside the firebox. We won’t publish specific Pacific Energy fault-code tables here, since ROMA’s dedicated page coverage for this brand is still growing — describe what your unit is actually doing when you call, and a technician will diagnose it properly rather than work from a generic list.
Why Brand Familiarity Matters for Parts Sourcing and Troubleshooting
Gas fireplace and stove hardware varies significantly between manufacturers — burner design, pilot assembly type, and glass mounting are rarely interchangeable across brands, and a technician unfamiliar with Pacific Energy’s specific hardware can waste a visit chasing the wrong component. ROMA’s experience with Pacific Energy units across Metro Vancouver means we generally know where to source replacement thermocouples, glass gaskets, and blower motors for this brand, and we’re upfront with you if a specific part needs to be special-ordered.
Pacific Energy shows up across a genuinely wide range of Vancouver-area homes — freestanding stoves in older character homes on the East Side, built-in inserts in West Coast-style new construction, and units in cabins and secondary properties across the wider region. In many of these homes, the fireplace or stove is doing real supplemental heating work through our damp, mild winters, not just providing ambiance, which is part of why a flame or ignition problem is worth addressing promptly rather than living with it through the season.
ROMA also recommends a pre-season check before heavy fireplace use starts each fall — confirming the pilot holds a steady flame, the glass seal is intact, and the vent termination outside is clear of debris that tends to accumulate over the summer months. Catching a weakening thermocouple or a partially blocked vent before the first cold snap is far less disruptive than discovering it mid-use.
Repair or Replace: What ROMA Considers
| Consideration | What It Means For You |
|---|---|
| Pilot and ignition components | Thermocouples, thermopiles, and igniters wear out on any gas unit — ROMA replaces these as needed rather than defaulting to a full unit swap. |
| Combustion quality | Sooting glass or an off-colour flame points to a combustion issue that should be corrected for safety, not just left as a cosmetic quirk. |
| Age and part availability | Older Pacific Energy models may need parts sourced through longer lead times — ROMA tells you this upfront. |
| Venting condition | Blocked or damaged venting affects both performance and safety — ROMA checks the exterior termination during a full diagnostic. |
| Overall unit condition | For an aging unit with recurring faults, ROMA gives you an honest comparison of continued repair against replacement. |
Why Metro Vancouver Homeowners Call ROMA for Pacific Energy Service
ROMA Heating & Cooling has served Metro Vancouver out of our Burnaby location since 1999 and holds a 4.8-star rating from 221 Google reviews. We’re a TSBC-licensed gas contractor (Gas licence LGA0202903), fully bonded and insured, with Red Seal-trained gasfitters on staff. ROMA offers upfront flat-rate pricing, free estimates on installs, 0% financing OAC for larger projects, and no hidden fees, serving Vancouver, Burnaby, North Vancouver, Maple Ridge, and Langley, among other Metro Vancouver communities, 7 days a week. Whatever your Pacific Energy unit is doing, call ROMA at (604) 704-0300 or book a free on-site estimate and a technician will take it from there.
For related service, see our furnace repair page and home inspection page, or reach us through our contact page.
Need a licensed Pacific Energy equipment technician in Greater Vancouver?
ROMA Heating & Cooling has served Metro Vancouver since 1999 — TSBC-licensed (Gas LGA0202903), bonded & insured, 4.8★ from 221 Google reviews. Upfront flat-rate pricing, free estimates on installs, 0% financing (OAC), no hidden fees, 7 days a week.
Frequently Asked Questions
Does ROMA service Pacific Energy gas fireplaces and stoves?
Yes — ROMA repairs and services Pacific Energy gas fireplaces, inserts, and stoves across Metro Vancouver. Call (604) 704-0300 to book a diagnostic visit.
Why won't my Pacific Energy gas stove stay lit?
This usually points to a weak thermocouple or thermopile signal, or occasionally a dirty pilot assembly. A ROMA technician checks the ignition system and combustion air as part of a full diagnostic.
Why is the glass on my Pacific Energy fireplace turning cloudy or sooty?
Sooting or staining glass usually points to a combustion issue rather than needing just a cleaning. ROMA checks flame pattern and venting to identify the cause.
How often should a Pacific Energy gas unit be serviced?
ROMA recommends an annual inspection to check the pilot and ignition system, burner condition, glass seal, and venting before heavy use season.
Is it worth repairing an older Pacific Energy fireplace or should I replace it?
It depends on the specific fault, part availability for your model, and how often issues have recurred. ROMA gives you an honest comparison of repair against replacement.
Reviewed by the ROMA Heating & Cooling team — TSBC-licensed gas contractor (Gas LGA0202903), serving Greater Vancouver since 1999. Updated August 2026.
What Greater Vancouver Homeowners Say
“Nelson worked hard to get the NTI unit fixed. He was always polite, courteous and on time.”
“As always Nelson was super efficient. Showed up on time and was quick to work. I had a full maintenance done on the fireplaces and furnace. He was awesome. I won’t use anyone else.”
“Excellent service. Andy had a spare Carrier inducer with him which saved us time.”
“Was very prompt to respond to our issues. Technician was scheduled for the day following my initial call.”
“Very professional heating company. Price is reasonable, excellent work.”
“Highly recommend this company. It was a pleasure dealing with Shawn and Nelson.”
“Professional and courteous technicians with attention to detail and customer needs.”
“Always great, friendly service. Serviced the hot water on-demand system. Honest and informative. Thanks!”
“Speedy response time, honest, and professional service from start to finish.”
Why Greater Vancouver Trusts ROMA Heating & Cooling
ROMA Heating & Cooling has installed, repaired and maintained heating and cooling systems across Metro Vancouver since 1999. Our team are TSBC-licensed gas fitters (Gas LGA0202903) and Red Seal-trained technicians — licensed, bonded and insured — and we back every job with upfront, flat-rate pricing and a 100% satisfaction guarantee. We hold a 4.8★ rating from 221+ Google reviews.
- Authorized for 30+ brands (Lennox, Carrier, Viessmann, Navien, Rheem & more)
- Upfront flat-rate pricing — no overtime or hidden fees
- Free, no-obligation estimates on new installations
- Locally owned & operated in Burnaby, BC
No Hidden Fees
Our service rates are transparent and easy to understand. You approve upfront, flat-rate pricing before we start — so you never get a bill you didn’t expect.
Licensed & Bonded
ROMA is a TSBC-licensed gas contractor (Gas LGA0202903). Our technicians are bonded, insured and Red Seal-trained — qualified for any heating or cooling system.
Free Estimates
We offer free, no-obligation estimates on new installations — furnaces, boilers, heat pumps, air conditioners, tankless and hot-water tanks.
