Greater Vancouver’s Trusted HVAC Experts Since 1999 · 4.8★ (221 reviews)

Do You Need Strata Approval for a Heat Pump?

TSBC-Licensed Gas Contractor · Gas LGA0202903Licensed, Bonded & InsuredServing Greater Vancouver since 19994.8★ (221 Google reviews)
Speak with a licensed ROMA technician todayCall (604) 704-0300Free Estimate
Quick answer: Yes, in most BC condos and townhouses you need strata approval to install a heat pump, because the outdoor unit, refrigerant line penetrations, and mounting affect common property. Submit a request to strata council with the equipment details, location and installer information, and secure written approval before work begins. Call ROMA at (604) 704-0300 or book a free estimate.

If you own a condo or townhouse in Greater Vancouver, installing a heat pump usually means placing an outdoor unit and running refrigerant lines through the building envelope, both of which typically touch common property. That is why strata approval is almost always required before you install. Understanding what your council needs, and preparing it in advance, is often the difference between a smooth project and one that stalls for months.

Why strata approval is needed

Get a Quick Quote — Right Here

Fast response from a licensed ROMA technician — no obligation.









4.8★ from 221+ Google reviews · Licensed & insured · TSBC LGA0202903

Prefer to talk now? Call (604) 704-0300

  • The outdoor condenser is usually mounted on a balcony, wall, ground pad or roof that is common property or limited common property.
  • Refrigerant lines and condensate drains penetrate exterior walls, altering the building envelope.
  • Councils are responsible for building appearance, noise limits, weatherproofing and shared liability.
  • Bylaws often require written approval for any alteration that affects common property, even a small one.

What strata councils usually want to see

📞 Talk to a licensed ROMA technician — (604) 704-0300

  1. The proposed outdoor and indoor unit locations, ideally with a photo or diagram.
  2. Equipment specs and model, ideally a quiet, compact ductless unit. See whether ductless mini-splits are worth it and how to size a mini-split.
  3. How penetrations will be sealed and waterproofed to protect the envelope.
  4. Noise ratings for the outdoor unit and clearances from neighbouring units.
  5. Proof the installer is licensed and insured. ROMA is a TSBC-licensed gas contractor (Gas licence LGA0202903), bonded and insured.
  6. Confirmation the work will be permitted. See our guide on heat pump permits in BC.

Typical approval process

StepWhat happens
1. Get a quoteInstaller proposes the unit, location and line routing
2. Submit requestWritten application to the strata council or manager
3. Council reviewMay require a council meeting or a general-meeting vote
4. Written approvalOften granted with conditions attached
5. InstallPermitted work by a licensed, insured contractor

Common conditions councils attach

  • An indemnity or assumption-of-liability agreement for the alteration.
  • A requirement to restore the area if the unit is later removed.
  • Approved colours, screening or placement to protect the building’s appearance.
  • Maximum noise limits and specific mounting or vibration-isolation methods.

Tips to get approved faster

  • Apply early, since councils may meet only monthly or quarterly.
  • Choose a quiet, low-profile unit to address noise and aesthetic concerns before they are raised.
  • Provide a clear diagram of the outdoor location and line routing.
  • Include the installer’s licence and insurance certificate up front.
  • Address weatherproofing and offer to accept any reasonable indemnity the strata requests.

Electrical and capacity considerations

A heat pump may need dedicated wiring, and older buildings sometimes have limited capacity. It helps to confirm this before you apply, since the electrical scope can affect the plan you present. See whether a heat pump requires an electrical upgrade and when you might need a panel upgrade.

How approval connects to rebates

Strata approval is separate from rebates, but you generally need it before you can proceed with a rebate-eligible install. See our guide to heat pump rebates for condos in BC and the current CleanBC and FortisBC rebate programs, noting that amounts and rules change and should be confirmed.

Safety and building integrity

Never modify common property, or run refrigerant lines and wiring, yourself. Sealed-system and electrical work must be performed by licensed professionals. Unauthorized alterations can create leaks, water damage and personal liability, and can void both your rebate and any strata approval.

Planning a condo or townhouse heat pump in Greater Vancouver? ROMA Heating & Cooling has designed strata-friendly systems since 1999 and prepares the documentation councils ask for, with upfront flat-rate pricing, free estimates and service seven days a week. Book a free estimate, explore our heat pump systems, or call (604) 704-0300.

Rather have a licensed pro handle it? Fast, honest help across Greater Vancouver.Call (604) 704-0300Free Estimate

Need a licensed Greater Vancouver HVAC team?

ROMA Heating & Cooling has served Metro Vancouver since 1999 — TSBC-licensed (Gas LGA0202903), bonded & insured, 4.8★ from 221 Google reviews. Upfront flat-rate pricing, free estimates, 0% financing (OAC), 7 days a week.

📞 Call (604) 704-0300Get a Free Estimate

Frequently Asked Questions

Is strata approval always required for a heat pump?

In most condos and townhouses, yes, because the outdoor unit and exterior penetrations affect common property. Requirements vary by strata, so check your bylaws and submit a request before starting work.

What should I include in my strata application?

Include the proposed unit locations, equipment specs, noise levels, how penetrations will be sealed, and proof your installer is licensed and insured. A clear diagram and permit commitment help councils approve faster.

How long does strata approval take?

It depends on how often the council meets and whether a vote is needed. Apply early, since approval can take weeks. Providing complete documentation up front reduces back-and-forth.

Can strata refuse a heat pump?

A strata can set reasonable conditions or decline requests that do not meet its bylaws, for example on noise, appearance or common-property changes. Choosing a quiet, low-profile unit and a licensed installer improves your chances of approval.

Reviewed by the ROMA Heating & Cooling team — TSBC-licensed gas contractor (Gas LGA0202903), serving Greater Vancouver since 1999. Updated June 2026.

Do I need strata approval to install a heat pump in BC?

In most BC stratas, yes. Under the Strata Property Act’s Standard Bylaws, Bylaw 5 requires written approval before altering parts of a strata lot such as the exterior and structure, and Bylaw 6 requires it before altering common property. A heat pump’s outdoor unit, line set and wall penetrations usually touch one or both. Your strata may have amended bylaws, so read your registered set. Confirm on the official program page.

The other provincial pieces owners ask us about:

  • Electrical planning reports: provincial rules require strata corporations to obtain an electrical planning report (EPR) on the building’s electrical capacity, with a December 31, 2026 deadline for many Metro Vancouver stratas. Confirm which deadline applies to your building on the Province’s official page. A completed EPR often makes a council more comfortable saying yes.
  • No blanket mandate: the Province’s housing ministry has indicated there is no blanket rule forcing stratas to approve heat pumps. Where an owner has a need protected by BC’s Human Rights Code, the strata’s duty to accommodate may apply; get advice for your situation.
  • BC Hydro condo program: BC Hydro’s heat pump rebate for condos and apartments requires strata approval before you can get pre-approval. Get the strata letter first, then apply. Confirm the steps on the official program page.

From what we see at council level, refusals rarely come from objection to heat pumps themselves. They come from vague requests: no drawing, no noise information, no plan for the condensate or the hole in the wall. A request that answers those questions up front tends to move much faster, and a council that has finished its EPR can answer the electrical question with something better than a guess.

How much does a heat pump cost in a condo or townhouse?

A strata heat pump’s price depends on the system type, how many rooms need heads, the line-set route, where the outdoor unit is allowed, the electrical supply to your unit, and any conditions the strata attaches. We give an upfront flat-rate written quote — call (604) 704-0300 or email info@romaheating.ca for exact pricing.

Strata-specific cost drivers we see:

  • Outdoor unit location: balcony, patio pad, roof or wall bracket, each with different mounting and access work. Some stratas restrict balconies entirely.
  • Line-set route: concealed routes through the unit cost more than exterior line-set covers, but councils often prefer them.
  • Condensate: water has to go somewhere approved, not dripping onto a neighbour’s patio.
  • Electrical: your suite panel may need a licensed electrician’s work; a building-wide limit is where the EPR comes in.
  • Strata conditions: noise limits, colour-matched covers, insurance certificates or a building-envelope consultant’s sign-off.
  • Townhouse vs high-rise: a ground-level townhouse is usually simpler than a high-rise balcony.

What does ROMA do on a strata heat pump job, step by step?

We assess the unit, prepare the approval package your council needs, wait for written approval, then install and commission. Once approved, a ductless system for a condo is often installed in one to two days; a townhouse ducted system can take longer.

  1. Site visit: rooms to heat and cool, wall space for heads, possible outdoor unit spots, panel capacity.
  2. Read your strata’s bylaws and any alteration policy with you, so the plan fits them from the start.
  3. Prepare the approval package: equipment spec sheets, a sketch showing the outdoor unit and line-set route, noise information, condensate route and wall penetration details.
  4. You submit it to council or the property manager; we answer their technical questions.
  5. Once written approval is in hand, you apply for any program pre-approval, then we schedule.
  6. Install the heads, line set and outdoor unit, seal penetrations, and run the condensate line.
  7. Our technician pressure tests, evacuates and verifies the charge; refrigerant work is never a DIY job.
  8. Walk you through the controls and leave the paperwork for the strata file.

How quickly can ROMA start, and what should I send first?

We book estimate visits 7 days a week, and a same-day visit is possible when the schedule allows. The calendar for strata jobs is mostly set by your council’s meeting cycle, so get the package started early. Book an estimate online or call (604) 704-0300.

  • Your registered bylaws and any alteration or heat pump policy the strata has adopted.
  • Photos of the balcony or patio, the electrical panel in your suite, and the room walls where heads might go.
  • The property manager’s contact details and the next council meeting date.
  • Whether the building has completed its electrical planning report.

Why hire a licensed, insured local contractor for a strata install?

Strata councils want to see that the contractor is licensed, insured and familiar with how buildings here are put together. ROMA is a TSBC-licensed gas contractor (Gas LGA0202903), bonded and insured, serving Metro Vancouver since 1999, and we’ve prepared approval packages for councils across the region.

Owners rate us 4.8 stars from 221 Google reviews. Installation estimates are free, quotes are flat-rate and written, and financing is available OAC. Our heat pump page covers the ducted and ductless systems we install.

What will my strata council ask for, and who provides it?

Councils differ, but most ask for the same handful of items. Here is who usually supplies each one.

Item the council asks forWho provides itWhy it matters
Written alteration requestOwnerStarts the approval under Bylaw 5 or 6
Equipment spec sheets and noise informationROMAShows the unit suits the building and neighbours
Outdoor unit and line-set sketchROMAShows exactly what changes on the exterior or common property
Proof of licence and insuranceROMAProtects the strata if something goes wrong
Electrical capacity confirmationStrata (EPR) and the owner’s electricianConfirms the building and suite can carry the load
Written approval letterStrata councilNeeded before BC Hydro program pre-approval

Where does ROMA install heat pumps in strata buildings?

We install in condos and townhouses across Metro Vancouver, including Vancouver, Burnaby, New Westminster, Richmond, Surrey, Coquitlam, Port Moody, North Vancouver, West Vancouver, Delta and Langley. Our Burnaby office keeps us close to the Metrotown, Brentwood and Lougheed areas and the townhouse complexes around them. Many of the stratas there have already been through a heat pump request or two, and we’re glad to work alongside whatever process your property manager already uses.

Safety note: if your home also has gas appliances and you smell gas, get everyone out, leave the switches alone, and call FortisBC’s emergency line and 911 from outside. If a CO alarm sounds or anyone feels headachy or nauseous, get out and call 911.

Want help with the approval package? Call (604) 704-0300 or email info@romaheating.ca.

More questions we hear about this

How much does a heat pump cost in a BC condo?

It depends on the number of indoor heads, where the strata allows the outdoor unit, the line-set route, your suite's electrical capacity and any strata conditions. After a free estimate visit we give you an upfront flat-rate written quote, and we can prepare the strata approval package at the same time. Call (604) 704-0300 or email info@romaheating.ca.

How long does strata approval and installation take?

Approval timing is set by your strata council's meeting schedule and any reviews they require, so it varies building to building. Once written approval and any program pre-approval are in hand, a condo ductless install is often done in one to two days. We book estimate visits 7 days a week.

Will you help register the warranty and keep paperwork for the strata?

Yes. After installation we help you complete the manufacturer's registration and give you the model, serial and installation details, which most stratas want on file for future owners. Registration terms vary by manufacturer, so check their official page. Keeping these documents together also helps with BC Hydro program claims.

Can I finance a strata heat pump and still apply for the BC Hydro rebate?

Financing is available on approved credit, and it doesn't stop you from applying to a utility program. For BC Hydro's condo and apartment program, written strata approval comes first, then pre-approval, then installation. Confirm the current steps on the official program page before booking the install date.

What Greater Vancouver Homeowners Say

4.8/5 from 221+ verified Google reviews

“Nelson worked hard to get the NTI unit fixed. He was always polite, courteous and on time.”

Chris Tipple · Verified Google review

“As always Nelson was super efficient. Showed up on time and was quick to work. I had a full maintenance done on the fireplaces and furnace. He was awesome. I won’t use anyone else.”

Tammy D · Verified Google review

“Excellent service. Andy had a spare Carrier inducer with him which saved us time.”

Steven E · Verified Google review

“Was very prompt to respond to our issues. Technician was scheduled for the day following my initial call.”

jason l · Verified Google review

“Very professional heating company. Price is reasonable, excellent work.”

Jessica Feng · Verified Google review

“Highly recommend this company. It was a pleasure dealing with Shawn and Nelson.”

Charlotte Stipp · Verified Google review

“Professional and courteous technicians with attention to detail and customer needs.”

Ted Laursen · Verified Google review

“Always great, friendly service. Serviced the hot water on-demand system. Honest and informative. Thanks!”

Wah Gee · Verified Google review

“Speedy response time, honest, and professional service from start to finish.”

Lauren McCaughey · Verified Google review

Read more reviews Call (604) 704-0300

Request Your Free Estimate

Fast response from a licensed ROMA technician — no obligation.









4.8★ from 221+ Google reviews · Licensed & insured · TSBC LGA0202903

Prefer to talk now? Call (604) 704-0300

Why Greater Vancouver Trusts ROMA Heating & Cooling

ROMA Heating & Cooling has installed, repaired and maintained heating and cooling systems across Metro Vancouver since 1999. Our team are TSBC-licensed gas fitters (Gas LGA0202903) and Red Seal-trained technicians — licensed, bonded and insured — and we back every job with upfront, flat-rate pricing and a 100% satisfaction guarantee. We hold a 4.8★ rating from 221+ Google reviews.

  • Authorized for 30+ brands (Lennox, Carrier, Viessmann, Navien, Rheem & more)
  • Upfront flat-rate pricing — no overtime or hidden fees
  • Free, no-obligation estimates on new installations
  • Locally owned & operated in Burnaby, BC

No Hidden Fees

Our service rates are transparent and easy to understand. You approve upfront, flat-rate pricing before we start — so you never get a bill you didn’t expect.

Licensed & Bonded

ROMA is a TSBC-licensed gas contractor (Gas LGA0202903). Our technicians are bonded, insured and Red Seal-trained — qualified for any heating or cooling system.

Free Estimates

We offer free, no-obligation estimates on new installations — furnaces, boilers, heat pumps, air conditioners, tankless and hot-water tanks.

ROMA Heating & Cooling is a trusted HVAC contractor serving Metro Vancouver since 1999. We specialize in furnace repair, heat pump installation, boiler services, air conditioning, and emergency heating solutions for residential, commercial, and government clients. Available for same-day and after-hours service, our certified technicians deliver fast, reliable, and affordable HVAC services across Greater Vancouver.

2800 Douglas Rd B Burnaby, BC V5C 5B7
Monday, Tuesday, Wednesday, Thursday, Friday, Saturday9:00 am – 8:00 pm
(604) 704-0300
(604) 704-0300
1999
50
Free in-home consultation across Greater Vancouver. Planning an installation, replacement, or not sure what you need? ROMA Heating & Cooling has helped Lower Mainland homeowners since 1999 — no obligation, no pressure. Request your free consultation or call (604) 704-0300.
Call Now Book Now
Emergency
Call NowFree Estimate
Scroll to Top