You walk past the boiler closet and see it: a code on the Navien‘s screen where the temperature usually sits. Maybe the radiators have gone cool, maybe the shower ran cold, or maybe everything still seems fine for the moment. This page from ROMA Heating & Cooling is written for that moment. It covers what to write down, what to leave alone, which simple checks are worth doing, and how a repair actually works when we come out anywhere in Greater Vancouver, from Burnaby condos to Surrey family homes and North Shore houses.
First, rule out danger. Smell gas? Get out, leave switches alone, and call FortisBC’s emergency line and 911 from outside. CO alarm going off, or anyone headachy, dizzy or sick? Leave and call 911. A code on its own is not usually an emergency, but those situations are.
What should you record when a Navien code appears?
| Record this | How it helps us |
|---|---|
| A clear photo of the display | Exact code and any text, no misremembering |
| What was happening: heating, hot water, starting up | On a combi, separates heating faults from hot water faults |
| Time and conditions: cold night, windy, heavy hot water use | Points to condensate, venting or flow causes |
| Pressure gauge reading | Low or high pressure changes where we look |
| Whether it has happened before | Recurring faults usually have an underlying cause |
| Any recent work, power outage or renovation | Changes around the boiler often explain new faults |
Which two checks are worth doing yourself?
Call a licensed ROMA gas technician — (604) 704-0300
There are really just two. First, look at the pressure gauge. If it reads very low, there may be a leak somewhere; do not keep topping it up, just tell us. Second, look outside at the vent and intake terminals. Snow, leaves, a wasp nest or a bin pushed against the wall can all interrupt a Navien’s air supply. If something is obviously blocking it and you can remove it safely by hand without pulling on the pipes, do so. Beyond that, you can confirm the thermostat is calling and the power is on, and try one reset if the manual allows. If the code returns, stop.
What should you avoid doing?
- Opening the boiler cabinet or removing covers.
- Trying repairs from a video or forum post.
- Resetting again and again to get heat back.
- Buying and installing a part suggested by an online code list.
- Adjusting anything on the gas valve or venting.
- Taping, covering or modifying the outside vent to keep weather out.
Navien boilers are sealed combustion gas appliances. Those steps can hide the real fault, damage the boiler or create a carbon monoxide risk.
Why can’t a code list online tell you the answer?
Online lists name a general category. The boiler’s control sees a symptom, such as a flame not proving, air not moving as expected, or water temperature rising too fast, and flags it. The cause behind that symptom could be one of several parts, a condition outside the boiler or a wiring issue. We do not state specific code meanings as fact for that reason. What we do is test the systems behind the code until the real cause is confirmed.
How does ROMA repair it?
The technician looks at your notes and photo, checks the home is safe, then runs the boiler through a heating call and, on a combi, a hot water call. Testing covers ignition and flame sensing, combustion, fan and air sensing, the venting route, water pressure and flow, the pump, the condensate trap and drain, temperature sensors and controls. Once the cause is clear, you receive a written flat-rate price, and repairs start only with your approval. After the fix, we run several cycles and test for carbon monoxide. You can read more about our process on our boiler repair page.
What causes codes in Greater Vancouver homes?
Local conditions shape the pattern. In Richmond and Surrey townhomes, garage-mounted Naviens can have condensate lines that freeze in a cold snap. On the North Shore and in Port Moody, heavy rain and damp air affect venting. In Vancouver and New Westminster heritage homes, old radiator loops send magnetite sludge into modern heat exchangers; the region’s water is soft, so what builds up is sludge, not mineral crust. Condo boilers in Burnaby and downtown towers sit in tight closets where condensate routing matters. We keep these patterns in mind, but we still test.
What if the code keeps coming back after a repair elsewhere?
A returning code usually means the part that tripped was replaced but the underlying condition was not addressed. We look for the root cause: flow restrictions, venting exposure, condensate routing, supply issues. If we find one, we explain it and price the correction so the problem stops recurring.
How can you make the next code less likely?
A little prevention goes a long way with a combi boiler that works year-round. Book a yearly service, ideally before the heating season, so the condensate trap gets cleaned, combustion is checked and the venting is inspected. If your Navien lives in a garage, ask about insulating or rerouting a condensate line that runs along a cold wall; that single change stops a lot of winter lockouts in Richmond, Surrey and Langley townhomes. Keep the outdoor terminals clear, especially after windstorms or snow. Watch the pressure gauge once a month and note what normal looks like, so you catch slow leaks early. On older radiator systems, ask whether a dirt separator makes sense to protect the heat exchanger from sludge. And if the inlet filter on the cold water side has never been cleaned, mention it during your service; on many combi units, a clogged screen can affect hot water performance. None of this requires you to open the boiler. It just keeps small issues from becoming codes.
When is it time to think about replacing the Navien?
If the diagnostic shows a leaking heat exchanger, an expensive component on an older unit, or a history of repeated faults, replacement may be better value. We explain the reasoning in writing. New installation estimates are free, and financing can be arranged for approved applicants.
How do you get a Navien code repaired by ROMA?
Call us or use our booking page and share your photo and notes. We work 7 days a week, and evening or weekend visits are possible when a technician is available. We have served Greater Vancouver since 1999, carry bonding and insurance, and have earned 4.8 stars from 221 Google reviews.
Tell us what you have — the brand, the model, and what it’s doing — and we’ll come back with the honest picture. Call (604) 704-0300 or book online to get your Navien error code repaired properly.
Need a licensed gas technician in Greater Vancouver?
ROMA Heating & Cooling has served Metro Vancouver since 1999 — TSBC-licensed (Gas LGA0202903), bonded & insured, 4.8★ from 221 Google reviews. Upfront flat-rate pricing, free estimates on installs, 0% financing (OAC), no hidden fees, 7 days a week.
Frequently Asked Questions
Is a Navien error code an emergency in Greater Vancouver?
Usually not by itself. It becomes an emergency if you smell gas or your CO alarm sounds, in which case leave and call for help from outside. If the home is safe, a code is a repair call. If vulnerable people are without heat in cold weather, tell us so we can prioritise.
Should I top up my Navien's pressure if the code seems pressure-related?
Not repeatedly. If pressure is low, there is probably a leak or a relief valve issue somewhere, and topping up hides the problem while adding fresh, oxygen-rich water to the system. Note the reading and call us. We will find where the water is going and quote the repair.
Can a blocked vent cause a code on my Navien?
Yes. Snow, leaves, nests or objects against the wall can restrict the air supply or exhaust, and the boiler will stop and show a code. If you can safely clear an obvious blockage by hand, do so. If the code returns or the terminal looks damaged, call us.
Do you repair Navien boilers in all Greater Vancouver cities?
We do: Vancouver, Burnaby, Richmond, New Westminster, Coquitlam, Port Coquitlam, Port Moody, North and West Vancouver, Surrey, Delta, White Rock, Langley and the Fraser Valley. Call (604) 704-0300 or book online, share the code and your notes, and we will arrange a visit.
Reviewed by the ROMA Heating & Cooling team — TSBC-licensed gas contractor (Gas LGA0202903), serving Greater Vancouver since 1999. Updated September 2026.
What Greater Vancouver Homeowners Say
“Nelson worked hard to get the NTI unit fixed. He was always polite, courteous and on time.”
“As always Nelson was super efficient. Showed up on time and was quick to work. I had a full maintenance done on the fireplaces and furnace. He was awesome. I won’t use anyone else.”
“Excellent service. Andy had a spare Carrier inducer with him which saved us time.”
“Was very prompt to respond to our issues. Technician was scheduled for the day following my initial call.”
“Very professional heating company. Price is reasonable, excellent work.”
“Highly recommend this company. It was a pleasure dealing with Shawn and Nelson.”
“Professional and courteous technicians with attention to detail and customer needs.”
“Always great, friendly service. Serviced the hot water on-demand system. Honest and informative. Thanks!”
“Speedy response time, honest, and professional service from start to finish.”
Why Greater Vancouver Trusts ROMA Heating & Cooling
ROMA Heating & Cooling has installed, repaired and maintained heating and cooling systems across Metro Vancouver since 1999. Our team are TSBC-licensed gas fitters (Gas LGA0202903) and Red Seal-trained technicians — licensed, bonded and insured — and we back every job with upfront, flat-rate pricing and a 100% satisfaction guarantee. We hold a 4.8★ rating from 221+ Google reviews.
- Authorized for 30+ brands (Lennox, Carrier, Viessmann, Navien, Rheem & more)
- Upfront flat-rate pricing — no overtime or hidden fees
- Free, no-obligation estimates on new installations
- Locally owned & operated in Burnaby, BC
No Hidden Fees
Our service rates are transparent and easy to understand. You approve upfront, flat-rate pricing before we start — so you never get a bill you didn’t expect.
Licensed & Bonded
ROMA is a TSBC-licensed gas contractor (Gas LGA0202903). Our technicians are bonded, insured and Red Seal-trained — qualified for any heating or cooling system.
Free Estimates
We offer free, no-obligation estimates on new installations — furnaces, boilers, heat pumps, air conditioners, tankless and hot-water tanks.
