KeepRite Furnace Green Light Flashing — Diagnosis & Repair (Greater Vancouver)

A flashing green light on a KeepRite furnace is usually reassuring rather than worrying. Green is the “good” colour on most gas furnaces — it signals status or that the control has power — and a slow, even green flash commonly means the control is healthy and running normally. For a Greater Vancouver homeowner, a flashing green far more often means “working” than “broken.” Still, the exact pattern carries meaning, and there’s a brand-specific detail worth knowing before you read too much into it.

KeepRite is an International Comfort Products (ICP) brand in the Carrier family, alongside Tempstar, Comfortmaker, Heil and Arcoaire. Many of these furnaces use a single amber diagnostic LED rather than separate green and red lights — so if you’re certain you’re seeing green, your board is one of the versions that uses a status-green light, and the amber (or a specific pattern) carries the fault information. Either way, the diagnostic legend printed on the blower-door label is the authority for what your green flash means on your specific model.

ROMA Heating & Cooling reads KeepRite and ICP-family diagnostic LEDs across Vancouver, Burnaby, Surrey, Coquitlam and the North Shore, and we can tell you when a green flash is nothing to worry about and when it deserves a look. Here’s how to interpret yours.

What a flashing green light usually means on your KeepRite furnace

Green is generally the status colour:

• Slow, even green flash: most often normal operation or a heartbeat showing the control is healthy and powered.
• Green during a heat call: commonly indicates the control received the call and is running the sequence — normal.
• Confirm your board: many KeepRite units use a single amber LED, so verify on the legend whether your board even has a status-green light.

How to read the green pattern

📞 Talk to a licensed ROMA furnace technician — (604) 704-0300

• Watch several complete cycles and note the rhythm — a steady heartbeat is different from a counted code.
• Note whether the furnace is heating normally while green flashes; if it is, green is almost certainly a status light.
• Open the blower door and match the pattern to the legend, which describes what steady and flashing green mean on your board.
• If green flashes but there’s no heat, note the pattern before cycling power.

If the label is missing or faded, note the model number and call (604) 704-0300 so we can reference the correct legend.

When a green flash still deserves a look

Green flashing but no heat

If green indicates a received heat call but the burners never fire, the problem is downstream — ignition, gas or venting — even though the control light looks healthy. Safe check: confirm gas is on, filter clean, vents clear.

Green plus an amber light

On boards with both, a green status flash alongside an amber fault light means the amber light is the message to read. Safe check: read the amber legend.

Green pattern that changed

If the green rhythm changed from what you’re used to, the legend may define specific green status codes worth confirming. Safe check: match the new pattern to the label.

Thermostat not satisfied

Green can show a call the thermostat is making while a thermostat or wiring issue keeps the cycle from completing. Safe check: fresh batteries, set to HEAT.

Green-flash quick-reference

Safe things to try once

If green is flashing and your KeepRite is heating normally, you likely don’t need to do anything — that’s the control telling you it’s healthy. If green flashes but there’s no heat, run the safe basics: set the thermostat to HEAT with fresh batteries, replace the 1-inch filter, open registers, seat the blower door, confirm gas is on, and clear the outdoor vents and condensate line. Cycle power once and watch a full cycle. If heat returns and green keeps flashing as a status light, all is well. If there’s still no heat, note the green pattern and any amber light and call a licensed gas technician. Never bypass a safety switch or jump a sensor.

What a ROMA tech checks first

When a customer reports a flashing green, our first job is to confirm whether it’s simply a healthy status light — which it often is — or a status light sitting next to a real problem. We read the board legend, confirm which LEDs the board uses (since many ICP boards use a single amber), and watch a full cycle. If green is normal and the furnace heats, we reassure and move on. If green shows a received heat call but the burners don’t fire, we diagnose downstream: we prove venting through the pressure switch and inducer, test the igniter, confirm the gas valve opens with correct pressure, and clean and test the flame sensor. On boards with an amber fault LED we read that light, since it carries the diagnostic message while green just reports status. We also verify line-neutral polarity and ground for the ICP/Carrier control family. The goal is to separate “working” from “looks like it’s working” and confirm real heat.

Repair or replace?

A flashing green rarely means a repair at all — it’s usually normal. When a real fault hides behind it, the fix is almost always inexpensive: an igniter, flame sensor, pressure switch, thermostat or a cleared vent on a sound KeepRite furnace. Replacement only enters the picture if diagnosis uncovers a cracked heat exchanger or unsafe combustion, or if an aging furnace is due for a high-efficiency upgrade with available rebates. We never turn a healthy status light into an unnecessary sale.

Greater Vancouver context

Because green usually means the control is healthy, the cases we see in Metro Vancouver where green flashes but there’s no heat almost always trace to the venting side of high-efficiency furnaces — sidewall terminals blocked by leaves or snow, or condensate traps backed up in cool Burnaby and North Shore mechanical rooms. The control is fine and shows it with a green light; the furnace just can’t prove venting to finish the cycle. Keeping vents and drains clear keeps that green light meaning exactly what it should.

When it’s an emergency

A green light is not an emergency signal, but the safety rules still apply. If you smell gas, leave the home and call FortisBC emergency and 911 from outside; do not troubleshoot. If a CO alarm sounds or anyone feels unwell, get everyone out and call 911. Otherwise a flashing green with good heat is simply your furnace working.

Why ROMA for KeepRite furnaces in Vancouver

ROMA Heating & Cooling is a TSBC-licensed gas contractor (Gas licence LGA0202903), bonded, insured and Red Seal-trained, rated 4.8★ from 221 Google reviews. We can tell you whether your KeepRite’s green flash is normal or hiding a real fault, and fix anything that needs it with upfront flat-rate pricing and no hidden fees. Estimates on installs are free, 0% financing is available OAC, and we work seven days a week. See our furnace repair service or book a free estimate. We serve Vancouver, Burnaby, Surrey, Coquitlam, Richmond and the North Shore — call (604) 704-0300, reach our team, or ask about maintenance plans.

Frequently Asked Questions

Is a flashing green light on my KeepRite furnace bad?

Usually not. Green is the status colour on most gas furnaces, and a slow, even green flash typically means the control is healthy and operating normally. If the furnace is heating while green flashes, there’s likely nothing wrong. If green flashes but there’s no heat, have it checked — the fault is downstream of the control.

Does my KeepRite furnace use a green light or an amber one?

Many KeepRite furnaces, being ICP/Carrier-family units, use a single amber diagnostic LED. Some boards do have a status-green light plus an amber fault light. Open the blower door and check the legend to confirm which LEDs your board uses — it tells you whether green is a status light and where the fault information lives.

My KeepRite green light flashes but there's no heat. What does that mean?

It means the control is healthy and often that it received the heat call, but something downstream — ignition, gas or venting — is stopping the burners. The green light looks fine because the board is fine; the fault is elsewhere. Confirm gas is on and vents are clear, then call a technician.

How do I know what my KeepRite green flash pattern means?

Match it to the diagnostic legend inside the blower door, which is specific to your board. Note whether it’s a steady heartbeat or a counted pattern and whether the furnace is heating. If the label is missing, note the model number and call ROMA at (604) 704-0300 to reference the right legend.

Does ROMA service KeepRite furnaces in Greater Vancouver?

Yes. ROMA Heating & Cooling reads KeepRite and ICP-family diagnostic LEDs and repairs any real fault across Vancouver, Burnaby, Surrey, Coquitlam and the North Shore. We won’t turn a normal green status light into an unnecessary repair. We are TSBC-licensed and insured — call (604) 704-0300 seven days a week.

Reviewed by the ROMA Heating & Cooling team — TSBC-licensed gas contractor (Gas LGA0202903), serving Greater Vancouver since 1999. Updated July 2026.

{“@context”: “https://schema.org”, “@graph”: [{“@type”: “Service”, “name”: “KeepRite Furnace Green Light Flashing — Diagnosis & Repair (Greater Vancouver)”, “serviceType”: “Furnace repair and fault diagnosis”, “description”: “KeepRite furnace green light flashing in Greater Vancouver? A green LED is often normal — learn how to read it, the safe checks, and when to call ROMA at.”, “provider”: {“@type”: “HVACBusiness”, “name”: “ROMA Heating & Cooling”, “telephone”: “+1-604-704-0300”, “address”: {“@type”: “PostalAddress”, “streetAddress”: “2800 Douglas Rd B”, “addressLocality”: “Burnaby”, “addressRegion”: “BC”, “postalCode”: “V5C 5B7”, “addressCountry”: “CA”}}, “areaServed”: [{“@type”: “City”, “name”: “Vancouver”}, {“@type”: “City”, “name”: “Burnaby”}, {“@type”: “City”, “name”: “Surrey”}, {“@type”: “City”, “name”: “Richmond”}, {“@type”: “City”, “name”: “Coquitlam”}, {“@type”: “City”, “name”: “North Vancouver”}, {“@type”: “City”, “name”: “West Vancouver”}, {“@type”: “City”, “name”: “New Westminster”}, {“@type”: “City”, “name”: “Delta”}, {“@type”: “City”, “name”: “Langley”}, {“@type”: “City”, “name”: “Maple Ridge”}, {“@type”: “City”, “name”: “Port Coquitlam”}, {“@type”: “City”, “name”: “Port Moody”}, {“@type”: “City”, “name”: “White Rock”}], “url”: “https://romaheating.ca/keeprite-furnace-green-light-flashing-greater-vancouver/”, “about”: {“@type”: “Product”, “name”: “Keeprite furnace”, “brand”: {“@type”: “Brand”, “name”: “Keeprite”}}}, {“@type”: “FAQPage”, “mainEntity”: [{“@type”: “Question”, “name”: “Is a flashing green light on my KeepRite furnace bad?”, “acceptedAnswer”: {“@type”: “Answer”, “text”: “Usually not. Green is the status colour on most gas furnaces, and a slow, even green flash typically means the control is healthy and operating normally. If the furnace is heating while green flashes, there’s likely nothing wrong. If green flashes but there’s no heat, have it checked — the fault is downstream of the control.”}}, {“@type”: “Question”, “name”: “Does my KeepRite furnace use a green light or an amber one?”, “acceptedAnswer”: {“@type”: “Answer”, “text”: “Many KeepRite furnaces, being ICP/Carrier-family units, use a single amber diagnostic LED. Some boards do have a status-green light plus an amber fault light. Open the blower door and check the legend to confirm which LEDs your board uses — it tells you whether green is a status light and where the fault information lives.”}}, {“@type”: “Question”, “name”: “My KeepRite green light flashes but there’s no heat. What does that mean?”, “acceptedAnswer”: {“@type”: “Answer”, “text”: “It means the control is healthy and often that it received the heat call, but something downstream — ignition, gas or venting — is stopping the burners. The green light looks fine because the board is fine; the fault is elsewhere. Confirm gas is on and vents are clear, then call a technician.”}}, {“@type”: “Question”, “name”: “How do I know what my KeepRite green flash pattern means?”, “acceptedAnswer”: {“@type”: “Answer”, “text”: “Match it to the diagnostic legend inside the blower door, which is specific to your board. Note whether it’s a steady heartbeat or a counted pattern and whether the furnace is heating. If the label is missing, note the model number and call ROMA at (604) 704-0300 to reference the right legend.”}}, {“@type”: “Question”, “name”: “Does ROMA service KeepRite furnaces in Greater Vancouver?”, “acceptedAnswer”: {“@type”: “Answer”, “text”: “Yes. ROMA Heating & Cooling reads KeepRite and ICP-family diagnostic LEDs and repairs any real fault across Vancouver, Burnaby, Surrey, Coquitlam and the North Shore. We won’t turn a normal green status light into an unnecessary repair. We are TSBC-licensed and insured — call (604) 704-0300 seven days a week.”}}]}]}