When you call about a fireplace problem, one of the first things we ask is “can you find the model and serial number?” It isn’t a test. Those two pieces of information tell us who made the fireplace, which version it is, which parts fit it, what the manufacturer’s instructions say, and sometimes roughly when it was built. With them, a technician can arrive prepared, sometimes with the right part already in the van. ROMA Heating & Cooling services gas fireplaces across Greater Vancouver, and this page shows you where to look and how to do it safely.
A quick safety note before you go hunting: if you smell gas, don’t look for anything; get everyone outside, leave switches alone, and call FortisBC’s emergency line and 911 from outside. If a carbon monoxide alarm sounds or people feel unwell, leave and call 911.
What is the rating plate, and why does it matter?
Every certified gas fireplace carries a rating plate or label from the manufacturer. It typically lists the brand, model number, serial number, the type of gas it’s set up for, and certification information. The model number identifies the design; the serial number identifies your specific unit and, for many brands, the production period. Parts, manuals, conversion kits and warranty questions all depend on those details.
Where is the rating plate usually located?
Call a licensed ROMA gas technician — (604) 704-0300
| Location | How to check it safely | Common on |
|---|---|---|
| Behind the lower grille or louvre panel | With the fireplace off and cool, lift or swing the lower panel open as the manual describes | Most built-in and insert fireplaces |
| On a metal tag attached by a small chain | Look for a tag tucked under the firebox; gently pull it into view | Many built-ins and inserts |
| On the side or back of the firebox | Visible on freestanding units; don’t move the stove | Freestanding gas stoves |
| Under the burner area of a log set | Often hard to see; leave it to the technician | Vented log sets |
| In the owner’s manual or installation paperwork | Check the home’s documents, builder binder or strata records | Any fireplace |
How do you photograph it without risk?
- Turn the fireplace off and let it cool completely; the grille area and glass get very hot.
- Use a flashlight or your phone’s light and look behind the lower panel. Many lower grilles lift, swing or pull off without tools, as described in the owner’s manual.
- If the tag is on a chain, gently draw it out just enough to photograph.
- Take a clear, well-lit photo of the whole plate so every line is legible.
- Put everything back as it was.
What not to do: don’t remove the glass front, don’t unscrew panels around the valve, don’t disturb wiring or gas lines, and don’t reach into the firebox. If the plate isn’t visible without that kind of disassembly, leave it for the technician.
What if the plate is missing or unreadable?
On older or modified units, the plate may be painted over, faded or gone. Other clues can help: the brand name on the front or trim, the owner’s manual, the builder’s documentation for newer homes, previous service invoices, or strata records for condos. If none of that works, the technician can often identify the fireplace from its valve, burner layout and venting.
What does ROMA do with the information?
We use the model and serial number to find the manufacturer’s parts list and instructions, check which components fit, and look for any updated or superseded parts. That speeds up diagnosis and helps avoid ordering the wrong part. It also helps if you want to register the fireplace or check manufacturer coverage.
Is it worth writing it down for later?
Yes. Store the photo with your home records or strata documents. The next time something goes wrong, or when you sell the house, the information is ready.
What else helps when you book?
Describe what the fireplace is doing, how old you think it is, whether it uses a remote or wall switch, and whether the glass has been sooting. If you have the owner’s manual, keep it handy for the technician.
What if I’m replacing the fireplace anyway?
The plate still helps. It tells us the existing venting type and sometimes which replacement units can reuse it. Our gas fireplace installation team uses that information when quoting.
Does ROMA need access to the rating plate during service?
Our technicians check it on every visit, so even if you can’t find it, don’t worry; we’ll locate it safely during the appointment.
Can the serial number tell me how old my fireplace is?
Often it can. Many manufacturers encode the production year or month in the serial number, though every brand uses its own format, and a few don’t encode dates at all. The certification label may also show a date. Knowing the age helps with honest repair-versus-replace advice and tells us which generation of parts to look for. If you’re curious, ask the technician during the visit; we can usually give you a reasonable estimate once we see the plate and the style of the controls.
Is the information the same for gas inserts and stoves?
Largely, yes. Inserts usually have their plate on a chain tag or behind the lower surround panel, which may be partly hidden by the trim kit that covers the gap to the masonry. Freestanding stoves often carry the plate on the back, where it’s visible without moving anything if you use a flashlight. For vented log sets in open fireplaces, the label is typically attached near the burner or control valve and is often easier for the technician to reach.
Which areas does ROMA cover?
We work right across the region, from Vancouver, Burnaby and New Westminster through Richmond, the North Shore and the Tri-Cities, and south and east into Surrey, Delta, White Rock and Langley.
Why book ROMA for your fireplace?
We’ve serviced gas fireplaces since 1999 as a Technical Safety BC licensed gas contractor, bonded and insured. With a 4.8-star Google rating from 221 reviews, seven-day booking and written flat-rate pricing, we make fireplace repairs straightforward.
Tell us what you have — the brand, the model, and what it’s doing — and we’ll come back with the honest picture. Call (604) 704-0300 or book a fireplace service online.
Need a licensed gas technician in Greater Vancouver?
ROMA Heating & Cooling has served Metro Vancouver since 1999 — TSBC-licensed (Gas LGA0202903), bonded & insured, 4.8★ from 221 Google reviews. Upfront flat-rate pricing, free estimates on installs, 0% financing (OAC), no hidden fees, 7 days a week.
Frequently Asked Questions
Where is the model number on most gas fireplaces in Greater Vancouver homes?
On most built-in fireplaces and inserts, it’s on a rating plate behind the lower grille or louvre panel, or on a metal tag attached by a small chain under the firebox. Freestanding stoves often have it on the side or back. Always check with the fireplace off and fully cooled.
Is it safe to remove the lower grille to find my fireplace's rating plate?
On most units, the lower grille or louvre is designed to be lifted or opened by the owner, as described in the manual, once the fireplace is off and cool. Don’t remove the glass front or any panel around the valve or wiring. If the plate isn’t visible, leave it for the technician.
What if my gas fireplace rating plate is missing?
Check the owner’s manual, builder documents, past service invoices or strata records, and look for a brand name on the trim. If none of those help, a technician can usually identify the fireplace from its valve, burner and venting design during the visit, so the repair can still go ahead.
Why does ROMA ask for my fireplace's serial number as well as the model?
The model number identifies the design, while the serial number identifies your specific unit and, for many brands, its production period. Parts can change within the same model over time, so both numbers help us order the correct component and check for any updated parts or manufacturer coverage.
Reviewed by the ROMA Heating & Cooling team — TSBC-licensed gas contractor (Gas LGA0202903), serving Greater Vancouver since 1999. Updated September 2026.
What Greater Vancouver Homeowners Say
“Nelson worked hard to get the NTI unit fixed. He was always polite, courteous and on time.”
“As always Nelson was super efficient. Showed up on time and was quick to work. I had a full maintenance done on the fireplaces and furnace. He was awesome. I won’t use anyone else.”
“Excellent service. Andy had a spare Carrier inducer with him which saved us time.”
“Was very prompt to respond to our issues. Technician was scheduled for the day following my initial call.”
“Very professional heating company. Price is reasonable, excellent work.”
“Highly recommend this company. It was a pleasure dealing with Shawn and Nelson.”
“Professional and courteous technicians with attention to detail and customer needs.”
“Always great, friendly service. Serviced the hot water on-demand system. Honest and informative. Thanks!”
“Speedy response time, honest, and professional service from start to finish.”
Why Greater Vancouver Trusts ROMA Heating & Cooling
ROMA Heating & Cooling has installed, repaired and maintained heating and cooling systems across Metro Vancouver since 1999. Our team are TSBC-licensed gas fitters (Gas LGA0202903) and Red Seal-trained technicians — licensed, bonded and insured — and we back every job with upfront, flat-rate pricing and a 100% satisfaction guarantee. We hold a 4.8★ rating from 221+ Google reviews.
- Authorized for 30+ brands (Lennox, Carrier, Viessmann, Navien, Rheem & more)
- Upfront flat-rate pricing — no overtime or hidden fees
- Free, no-obligation estimates on new installations
- Locally owned & operated in Burnaby, BC
No Hidden Fees
Our service rates are transparent and easy to understand. You approve upfront, flat-rate pricing before we start — so you never get a bill you didn’t expect.
Licensed & Bonded
ROMA is a TSBC-licensed gas contractor (Gas LGA0202903). Our technicians are bonded, insured and Red Seal-trained — qualified for any heating or cooling system.
Free Estimates
We offer free, no-obligation estimates on new installations — furnaces, boilers, heat pumps, air conditioners, tankless and hot-water tanks.
More ROMA services in Vancouver
Part of our Gas Fireplace Guide: Venting, Service and Safety for BC Homes › How gas fireplaces work
Related guides in this topic:
Real ROMA gas fireplace work. These photos are from our own jobs, not stock images. See more in our work gallery or call (604) 704-0300.
