Greater Vancouver’s Trusted HVAC Experts Since 1999 · 4.8★ (221 reviews)

High-Efficiency Furnace & Boiler Brands Compared — Greater Vancouver

TSBC-Licensed Gas Contractor · Gas LGA0202903Licensed, Bonded & InsuredServing Greater Vancouver since 19994.8★ (221 Google reviews)
Speak with a licensed ROMA technician todayCall (604) 704-0300Free Estimate
Quick answer: The right high-efficiency furnace or boiler brand depends on correct sizing, venting, and your mechanical room more than the brand name itself — ROMA installs Lennox, Carrier, Viessmann, NTI, and Navien equipment and gives an honest, home-specific recommendation; call (604) 704-0300 for a free consult. Call ROMA at (604) 704-0300 or book a free estimate.

If you’re replacing an aging furnace or boiler and trying to figure out which brand to go with, you’ve probably noticed that every manufacturer claims to make the most efficient equipment. Lennox, Carrier, Viessmann, NTI, Navien, and the other major brands ROMA installs across Metro Vancouver all make genuinely good high-efficiency equipment — the harder question isn’t “which brand is best,” it’s which combination of brand, model, and sizing is actually right for your specific home.

ROMA Heating & Cooling has installed high-efficiency furnaces and boilers across Vancouver, Burnaby, Richmond, and Coquitlam since 1999, and our technicians work with all of these brands regularly enough to give you an honest, even-handed answer rather than steering you toward whichever brand happens to be in the truck. This page walks through how to actually compare high-efficiency equipment, without inventing specific efficiency numbers or model specs that vary by year and configuration.

If you want a recommendation specific to your home, that’s exactly what a free on-site consultation is for — call ROMA at (604) 704-0300 and we’ll walk through real options based on your actual mechanical room, ductwork or piping, and heating load.

What “high-efficiency” actually means

Get a Quick Quote — Right Here

Fast response from a licensed ROMA technician — no obligation.









4.8★ from 221+ Google reviews · Licensed & insured · TSBC LGA0202903

Prefer to talk now? Call (604) 704-0300

For gas furnaces and boilers, efficiency is usually described using AFUE (Annual Fuel Utilization Efficiency), a percentage that reflects how much of the fuel’s energy ends up as usable heat versus lost up the exhaust. Condensing equipment — the high-efficiency tier most brands now build — extracts additional heat from the exhaust gases by cooling them enough to condense water vapour out of the flue gas, which is why condensing furnaces and boilers vent through PVC or ABS pipe instead of metal, and why they produce a condensate drain that needs to go somewhere. We won’t quote specific AFUE percentages here because they vary by exact model, capacity, and configuration, and change as manufacturers update product lines — your technician can pull the actual rated number for any model you’re comparing.

The brands ROMA installs across Metro Vancouver

📞 Talk to a licensed ROMA HVAC technician — (604) 704-0300

ROMA installs and services equipment from Lennox, Carrier, Viessmann, NTI, and Navien, among others, across the region. Lennox and Carrier are well-established North American furnace and AC manufacturers with wide model ranges and strong parts availability. Viessmann and NTI are known primarily for boilers, including combination systems that handle both space heating and domestic hot water. Navien makes condensing boilers and tankless water heaters and has become common in newer Metro Vancouver construction. Each brand has multiple product tiers, and the right one for your home depends far more on correct sizing and installation than on brand name alone.

Rather have a licensed pro handle it? Fast, honest help across Greater Vancouver.Call (604) 704-0300Free Estimate

How to compare brands the right way

  • Efficiency tier — condensing versus non-condensing, and where a specific model sits within that manufacturer’s lineup.
  • Capacity and sizing — a high-efficiency unit that’s the wrong size for your home’s heating load will underperform regardless of brand; proper load calculation matters more than the badge on the front.
  • Venting and gas-line requirements — some installations are more complex depending on your existing venting, gas line capacity, and mechanical room layout, which can affect both brand suitability and installation cost.
  • Warranty terms when registered — most manufacturers offer stronger coverage when the unit is professionally installed and registered; ROMA handles registration as part of installation.
  • Local parts and service support — a brand with strong regional parts availability means faster repairs down the road if something does need service.

Why the highest efficiency number isn’t automatically the right choice

It’s tempting to assume the highest-rated model is always the best pick, but a furnace or boiler that’s oversized for your home — even a very efficient one — can short-cycle, wear out faster, and deliver less comfort than a correctly sized unit with a slightly lower efficiency tier. Venting complexity, existing gas line capacity, and mechanical room space can also make one brand’s installation meaningfully simpler (and less disruptive) than another’s in a specific home, particularly in older character homes or tightly packed strata mechanical rooms common across Vancouver and Burnaby. This is why ROMA’s free on-site estimate includes an actual look at your equipment, ductwork or piping, and home before recommending a specific brand and model — not a generic recommendation based on brand reputation alone.

Comparison factorWhat to ask aboutWhy it matters
Efficiency tierIs it condensing, and where in the brand’s lineup?Affects venting requirements and long-term operating cost
SizingHas a proper heating load calculation been done?An oversized or undersized unit underperforms regardless of brand
Venting complexityCan your existing venting be reused or does it need replacing?Can significantly affect installation scope
WarrantyWhat’s covered when professionally installed and registered?Protects your investment if something needs service later
Local supportDoes ROMA stock or have quick access to parts for this brand?Affects how fast a future repair can happen

How ROMA approaches a brand-agnostic recommendation

Because ROMA installs and services multiple major brands rather than being tied to a single manufacturer’s dealer network, our recommendation starts with your home rather than with a brand. A technician measures your actual heating load using your home’s size, insulation, window exposure, and layout — not a rule-of-thumb estimate — then looks at what your existing venting, gas line, electrical, and mechanical room space can support without unnecessary modification. From there, two or three specific models across different brands usually come out as genuinely comparable options, and the final call often comes down to secondary factors like warranty terms when registered, noise levels, footprint in a tight mechanical closet, or how well a particular model’s staging matches your home’s actual heating pattern through the year.

Common mistakes homeowners make when comparing brands online

A lot of online efficiency comparisons quote a single AFUE number per brand as if every model that brand makes shares it — in reality, a single manufacturer often sells furnaces or boilers spanning a wide efficiency range, from base models to top-tier condensing units, so “which brand is more efficient” is often the wrong question compared to “which specific model, correctly sized, fits this home.” Another common mistake is assuming a higher price automatically means better long-term value; installation quality, correct sizing, and proper commissioning with combustion testing affect real-world performance and longevity at least as much as the specific model chosen. Ignoring venting and gas-line compatibility with your existing setup is another frequent gap in online comparisons, since a model that would be a great fit in a new-construction mechanical room can require significant extra work in an older character home.

Safety and code compliance across every brand

Whichever brand you choose, proper installation by a licensed gasfitter matters more than the model itself when it comes to safety — correct venting, gas line sizing, and combustion setup are what keep a high-efficiency furnace or boiler operating safely over its lifespan. ROMA’s technicians are TSBC-licensed gas contractors and Red Seal-trained, and every installation is commissioned with proper combustion testing regardless of brand.

Why homeowners across Metro Vancouver trust ROMA’s recommendation

ROMA Heating & Cooling has installed high-efficiency furnaces and boilers from Lennox, Carrier, Viessmann, NTI, Navien, and other major brands across Vancouver, Burnaby, Surrey, and Port Coquitlam since 1999, and we’re rated 4.8 stars from 221 Google reviews. We’re not tied to a single manufacturer, so our recommendation is based on what actually fits your home, not a sales quota. We offer upfront flat-rate pricing, free on-site estimates, 0% financing OAC, and service Metro Vancouver 7 days a week. For brand-specific detail, see our furnace and boiler pages, or call ROMA at (604) 704-0300 and book a free consultation to get a real recommendation for your home.

Learn more about ROMA’s related services.

Need a licensed HVAC technician in Greater Vancouver?

ROMA Heating & Cooling has served Metro Vancouver since 1999 — TSBC-licensed (Gas LGA0202903), bonded & insured, 4.8★ from 221 Google reviews. Upfront flat-rate pricing, free estimates on installs, 0% financing (OAC), no hidden fees, 7 days a week.

📞 Call (604) 704-0300Get a Free Estimate

Frequently Asked Questions

Which brand is the most efficient?

All the major brands ROMA installs make genuinely high-efficiency condensing equipment, and specific AFUE ratings vary by model and change over time, so we don’t rank brands generically here — your technician can pull the exact rated efficiency for any model you’re comparing.

Is a higher efficiency rating always worth paying more for?

Not automatically. Correct sizing and installation quality affect real-world performance and comfort more than a small difference in efficiency rating, which is why a proper load calculation matters before choosing a model.

Can ROMA service a brand it didn't install?

Yes, ROMA services Lennox, Carrier, Viessmann, NTI, Navien, and many other brands regardless of who installed the original equipment.

Does switching brands mean my venting has to change?

It depends on your existing venting and the new unit’s requirements — this is something a technician evaluates on-site rather than something that can be answered generically, since it varies home to home.

How do I get a real recommendation for my home?

Call ROMA at (604) 704-0300 or book a free on-site estimate — a technician will look at your actual mechanical room, ductwork or piping, and heating load before recommending a specific brand and model.

Reviewed by the ROMA Heating & Cooling team — TSBC-licensed gas contractor (Gas LGA0202903), serving Greater Vancouver since 1999. Updated August 2026.

Which 98% AFUE furnaces are worth a look in Greater Vancouver?

Eight gas furnace lines publish a top AFUE of 98% or more. Lennox’s SLP99V leads at up to 99%, Carrier‘s Infinity 98 and Bryant’s Evolution 98 list up to 98.5%, and Daikin, Rheem, York, KeepRite and Armstrong Air list 98% or up to 98%. All of them modulate, so choose on warranty, modulation detail and how your home vents.

The boiler half of this page covers hot-water heating. This half is for the many Greater Vancouver homes on forced air, where the owner has heard “get the highest efficiency you can” and wants to know what that looks like on real spec sheets. Below are the furnace lines rated at the very top of the scale, taken from the manufacturers’ own documents.

How do the top-efficiency furnace lines compare?

All eight modulate and sit inside a narrow AFUE band, so warranty terms and modulation detail separate them. Lennox and Carrier both describe 1% increments; Carrier, Rheem and KeepRite publish a 40% to 100% range; and Armstrong Air says it varies heat and airflow in increments as small as 5%.

LineAFUEModulationPublished inputHeat exchangerParts
Lennox SLP99VUp to 99%Increments as small as 1%66,000 to 132,000 BtuhLimited lifetime, original owner (residential); 20 years subsequent owners10 years on covered components (residential)
Carrier Infinity 98 (59MN7)Up to 98.5%1% steps between 40% and 100% capacity—Lifetime limited with timely registration (20 years if not registered within 90 days)10-year limited with timely registration (5 years if not registered within 90 days)
Bryant Evolution 98 (987M)Up to 98.5%Modulating60,000 – 120,000 BTUHLifetime limited (original owner, owner-occupied) upon timely registration; 20 years if not10-year parts limited upon timely registration; 5 years if not
Daikin DR97MCUp to 98%Self-calibrating modulating gas valve—20-year limited12-year limited
Rheem Prestige R98MV98%40% to 100% of capacity60-115 kBTULimited lifetime10 years
York Affinity YP9CUp to 98% (97.5% to 98.0% by size)Modulating60-120 MBH (min/max e.g. 60/21 to 120/42 MBH)Lifetime with online registration within 90 days; otherwise 20-year10-year with online registration within 90 days; otherwise 5-year
KeepRite Ion 98 (G97CMN)Up to 98%40%-100% capacity60,000-120,000 BTUhLifetime limited upon timely registration (20 years if not registered within 90 days)10-year limited upon timely registration (5 years if not registered within 90 days)
Armstrong Air A98MVK98%Varies heat and airflow in increments as small as 5%———

Notes from the sources: Bryant’s Canadian listing shows 98.3% elsewhere while its product page says up to 98.5%, so specifications vary by document. Daikin’s older DM97MC page listed a lifetime heat exchanger; the current DR97MC page says 20-year. York’s figures come from a technical guide, because York.com pages render client-side and could not be read directly. Rheem’s data comes from its 06/23 Endeavor Line comparison brochure, which lists a Rheem Canada Ltd. address, and describes a constant CFM blower. Armstrong Air’s current K-series pages don’t publish warranty terms, so those cells stay blank; the A98MVK lists a refrigerant detection system (Protection Pro) and MyHomeComfort / Comfort Sync control.

What does 98% AFUE mean for a forced-air home here?

Under the rating test, nearly all the gas burned becomes heat inside the house, and what’s left leaves through a cool plastic vent. In Greater Vancouver’s mild, wet heating season, the bigger real-world gains come from modulation and correct sizing rather than the last fraction of a point on the label.

These furnaces condense moisture out of their exhaust, producing a steady flow of acidic condensate that needs a proper drain, sometimes with a pump or neutralizer. That is a different problem from the boiler side of this page, where Metro Vancouver’s soft water shows up as magnetite and sediment in the heating loop. A furnace has no water loop, but a blocked condensate trap is a frequent reason a high-efficiency unit stops heating in the first cold week of the season, which is why we check the trap and drain line on every service.

Which warranty terms stand out among the top-efficiency lines?

Daikin lists the longest standard parts term at 12-year limited. Lennox, Carrier, Bryant, Rheem, York and KeepRite list 10-year parts, most conditional on registration. Six of the lines list lifetime or limited lifetime heat exchanger coverage with conditions, against 20-year limited for Daikin.

Unit replacement terms differ widely. Bryant’s 10-year Red Shield covers heat exchanger failure only, upon timely registration. KeepRite lists a 10-year No Hassle Replacement limited term. Daikin lists a 6-year limited term that requires annual maintenance, and Rheem a conditional limited lifetime replacement that requires registration. Carrier, Bryant, York and KeepRite use a 90-day registration window; Daikin uses 60 days. Lennox’s Signature models add an optional extension: a default 2-year parts-only extension (12 years parts-only total) or 3 years labor (10 years parts + 3 years labor).

Which homes get the most from a 98% furnace?

Homes that run heat for long hours gain the most, such as a family house with a suite downstairs and someone home all day. A small, lightly used home gains less, and a house that needs a difficult new vent route may be better served by a different plan altogether.

  • Detached home with a basement suite: a high-capacity modulating line such as the Lennox SLP99V (66,000 to 132,000 Btuh) or KeepRite Ion 98 (60,000-120,000 BTUh), sized by heat loss.
  • Home planning central AC or a heat pump coil later: a communicating platform such as the Daikin DR97MC is worth a look, and Armstrong Air lists a refrigerant detection system on the A98MVK.
  • Townhouse in a strata: confirm the vent termination with council first; a high rating doesn’t help if the vent location isn’t approved.

How does ROMA size and plan a high-efficiency furnace?

We run a heat-loss calculation, map the vent route and clearances, check gas pipe size against everything on the meter, and plan the condensate drain before choosing a model. On a 98%-class unit, those four checks decide whether the label efficiency shows up in your home.

Then we write it up as an upfront flat-rate quote, with financing available OAC. ROMA has served Metro Vancouver since 1999, works 7 days a week, and is a TSBC-licensed gas contractor (Gas LGA0202903), bonded and insured. One safety note: if you smell gas, get everyone out, don’t use switches, and call FortisBC’s emergency line and 911 from outside; if a CO alarm sounds or anyone has headache or nausea, leave and call 911. Call (604) 704-0300, email info@romaheating.ca, or book a high-efficiency furnace estimate. See also financing and furnace repair.

Sources

  • Lennox product and warranty pages (www.lennox.com), retrieved November 2026
  • Carrier Canada product pages (www.carrier.com), retrieved November 2026
  • Bryant product pages and Canadian listing (bryant.com, www.bryant.com), retrieved November 2026
  • Daikin product pages (daikincomfort.com), retrieved November 2026
  • Rheem Endeavor Line 90%+ comparison brochure, 06/23 (media.rheem.com), retrieved November 2026
  • York Affinity technical guide (rosedale.yorknow.com, www.luxaire.com), retrieved November 2026
  • KeepRite product pages (www.keeprite.com), retrieved November 2026
  • Armstrong Air product pages (www.armstrongair.com), retrieved November 2026

Specifications change; confirm the current model’s rating plate and spec sheet before you buy.

More questions we hear about this

Which high-efficiency furnace lists the highest AFUE?

Of the 98%-class lines we compared, Lennox's SLP99V lists up to 99% AFUE. Carrier's Infinity 98 and Bryant's Evolution 98 list up to 98.5%. Daikin DR97MC, York Affinity YP9C and KeepRite Ion 98 list up to 98%, while Rheem Prestige R98MV and Armstrong Air A98MVK list 98%. York's figure varies by size, from 97.5% to 98.0%.

Does a 98% furnace need different venting?

It vents like other condensing furnaces: plastic pipe to a sidewall or roof, plus a condensate drain, rather than the old metal chimney. The new vent must meet clearances from windows, doors and property lines, and in a strata the termination often needs council approval. We plan the vent route and drain before recommending any model.

What does the Armstrong Air A98MVK warranty cover?

Armstrong Air's current K-series pages do not publish warranty terms, so we left those cells blank rather than guess. Older, out-of-production Armstrong pages listed terms for different models, which don't automatically apply. Ask for the current warranty document for the exact model on your quote, and confirm any registration requirement before installation day.

Is a 98% furnace worth it over a lower-rated one in Vancouver?

It depends on the house more than the label. In our mild, damp heating season, modulation and correct sizing often matter more than a small AFUE difference. A 98%-class modulating furnace makes most sense in a larger or multi-level home that runs heat for long hours. A room-by-room heat-loss calculation tells us which option fits.

What Greater Vancouver Homeowners Say

4.8/5 from 221+ verified Google reviews

“Nelson worked hard to get the NTI unit fixed. He was always polite, courteous and on time.”

Chris Tipple · Verified Google review

“As always Nelson was super efficient. Showed up on time and was quick to work. I had a full maintenance done on the fireplaces and furnace. He was awesome. I won’t use anyone else.”

Tammy D · Verified Google review

“Excellent service. Andy had a spare Carrier inducer with him which saved us time.”

Steven E · Verified Google review

“Was very prompt to respond to our issues. Technician was scheduled for the day following my initial call.”

jason l · Verified Google review

“Very professional heating company. Price is reasonable, excellent work.”

Jessica Feng · Verified Google review

“Highly recommend this company. It was a pleasure dealing with Shawn and Nelson.”

Charlotte Stipp · Verified Google review

“Professional and courteous technicians with attention to detail and customer needs.”

Ted Laursen · Verified Google review

“Always great, friendly service. Serviced the hot water on-demand system. Honest and informative. Thanks!”

Wah Gee · Verified Google review

“Speedy response time, honest, and professional service from start to finish.”

Lauren McCaughey · Verified Google review

Read more reviews Call (604) 704-0300

Request Your Free Estimate

Fast response from a licensed ROMA technician — no obligation.









4.8★ from 221+ Google reviews · Licensed & insured · TSBC LGA0202903

Prefer to talk now? Call (604) 704-0300

Why Greater Vancouver Trusts ROMA Heating & Cooling

ROMA Heating & Cooling has installed, repaired and maintained heating and cooling systems across Metro Vancouver since 1999. Our team are TSBC-licensed gas fitters (Gas LGA0202903) and Red Seal-trained technicians — licensed, bonded and insured — and we back every job with upfront, flat-rate pricing and a 100% satisfaction guarantee. We hold a 4.8★ rating from 221+ Google reviews.

  • Authorized for 30+ brands (Lennox, Carrier, Viessmann, Navien, Rheem & more)
  • Upfront flat-rate pricing — no overtime or hidden fees
  • Free, no-obligation estimates on new installations
  • Locally owned & operated in Burnaby, BC

No Hidden Fees

Our service rates are transparent and easy to understand. You approve upfront, flat-rate pricing before we start — so you never get a bill you didn’t expect.

Licensed & Bonded

ROMA is a TSBC-licensed gas contractor (Gas LGA0202903). Our technicians are bonded, insured and Red Seal-trained — qualified for any heating or cooling system.

Free Estimates

We offer free, no-obligation estimates on new installations — furnaces, boilers, heat pumps, air conditioners, tankless and hot-water tanks.

Call Now Book Now
Emergency
Call NowFree Estimate
Scroll to Top