The short answer: yes, they do
An old myth says heat pumps quit when it gets cold. That was somewhat true decades ago, but today’s cold-climate heat pumps are a different technology. They are specifically built to extract heat from air well below freezing and keep your home warm through a BC winter.
How cold-climate heat pumps handle sub-zero air
📞 Talk to a licensed ROMA technician — (604) 704-0300
Even air that is below 0C still contains heat energy, and cold-climate models use enhanced components to capture it efficiently:
- Variable-speed inverter compressors that ramp up to hold output as it gets colder.
- Enhanced vapour-injection or improved refrigerant circuits that keep the system effective at low temperatures.
- Smart defrost controls that clear coil frost without wasting energy.
The result: a properly chosen cold-climate heat pump can keep heating efficiently at temperatures far below the freezing point.
What this means for Metro Vancouver
| Typical BC condition | Heat pump behaviour |
|---|---|
| Mild, wet winter (most days) | Highly efficient, steady heat |
| Around and below freezing | Efficiency dips slightly, still heats well |
| Rare deep cold snap | Cold-climate output holds; backup heat may assist |
Because Greater Vancouver rarely sees prolonged extreme cold, a heat pump spends almost the entire winter in its comfortable range. For a fuller explanation of the mechanics, see how heat pumps work during winter.
When backup heat matters
For extra peace of mind during rare cold extremes, systems can include backup heat – either electric resistance elements or, in a dual-fuel setup, a gas furnace. Communities in colder parts of BC’s interior or at elevation may benefit more from backup than coastal Metro Vancouver homes. We size and configure this to your specific location and comfort preferences.
Getting reliable sub-zero performance
Cold-weather reliability depends on more than the equipment rating:
- Correct sizing for your home’s heating load.
- The outdoor unit raised and kept clear of snow and ice.
- Proper refrigerant charge and airflow – maintained with a regular maintenance plan.
- Good home insulation and sealing to reduce the load.
If your existing heat pump seems to lose output in the cold, our guide on why a heat pump isn’t heating properly is a useful next step.
Talk to a local expert
ROMA Heating & Cooling has installed cold-climate systems across Greater Vancouver since 1999 and can recommend the right model and backup strategy for your area. We are TSBC-licensed (Gas licence LGA0202903), bonded and insured. Explore our heat pump services, book a free estimate, or call (604) 704-0300.
What to expect on a genuinely cold day
Even during one of Metro Vancouver’s occasional cold snaps, a well-installed cold-climate heat pump keeps working – you will simply notice it running longer to maintain the set temperature, and possibly running more frequent defrost cycles. Both are normal and expected behaviour, not signs of failure. If your home stays comfortable, the system is doing its job. Where a home has backup heat, it may briefly assist during the very coldest hours, then step back once conditions ease.
Common cold-weather myths, cleared up
- “Heat pumps quit below freezing.” Outdated. Cold-climate models heat well into sub-zero temperatures.
- “Steam from the unit means it’s broken.” No – that’s the normal defrost cycle melting coil frost.
- “You always need a gas furnace as backup.” Not in mild coastal areas; backup is optional and location-dependent.
- “Longer run times waste energy.” Steady low-output running is actually how these systems achieve efficiency.
Protecting winter performance
Small habits make a real difference in the cold: keep the outdoor unit elevated and clear of snow so meltwater drains, never throw a cover over an operating unit, and change filters on schedule so airflow stays strong. An annual tune-up before winter verifies refrigerant charge and defrost operation. If you ever notice thick ice that won’t clear or a sharp drop in output, have a licensed technician inspect it rather than trying to chip ice off the coil yourself.
Need a licensed Greater Vancouver HVAC team?
ROMA Heating & Cooling has served Metro Vancouver since 1999 — TSBC-licensed (Gas LGA0202903), bonded & insured, 4.8★ from 221 Google reviews. Upfront flat-rate pricing, free estimates, 0% financing (OAC), 7 days a week.
Frequently Asked Questions
At what temperature do heat pumps stop working?
Modern cold-climate heat pumps keep producing useful heat well below freezing, many far below 0C. Efficiency gradually decreases as it gets colder, which is when optional backup heat can assist during rare extremes.
Do I need backup heat with a heat pump in BC?
In mild coastal Metro Vancouver, a well-sized cold-climate heat pump often needs backup only rarely. Colder interior or higher-elevation locations benefit more from electric or dual-fuel backup for extreme cold snaps.
Are cold-climate heat pumps really different?
Yes. They use variable-speed compressors and enhanced refrigerant circuits designed for low temperatures, so they maintain much more heating capacity in sub-zero cold than older or standard models.
Why does my heat pump seem weaker when it's cold?
Some efficiency drop in cold weather is normal, but a large loss can signal undersizing, low refrigerant, a blocked outdoor unit or a maintenance issue. A licensed technician should diagnose a significant drop.
Reviewed by the ROMA Heating & Cooling team — TSBC-licensed gas contractor (Gas LGA0202903), serving Greater Vancouver since 1999. Updated June 2026.
What Greater Vancouver Homeowners Say
“Nelson worked hard to get the NTI unit fixed. He was always polite, courteous and on time.”
“As always Nelson was super efficient. Showed up on time and was quick to work. I had a full maintenance done on the fireplaces and furnace. He was awesome. I won’t use anyone else.”
“Excellent service. Andy had a spare Carrier inducer with him which saved us time.”
“Was very prompt to respond to our issues. Technician was scheduled for the day following my initial call.”
“Very professional heating company. Price is reasonable, excellent work.”
“Highly recommend this company. It was a pleasure dealing with Shawn and Nelson.”
“Professional and courteous technicians with attention to detail and customer needs.”
“Always great, friendly service. Serviced the hot water on-demand system. Honest and informative. Thanks!”
“Speedy response time, honest, and professional service from start to finish.”
Why Greater Vancouver Trusts ROMA Heating & Cooling
ROMA Heating & Cooling has installed, repaired and maintained heating and cooling systems across Metro Vancouver since 1999. Our team are TSBC-licensed gas fitters (Gas LGA0202903) and Red Seal-trained technicians — licensed, bonded and insured — and we back every job with upfront, flat-rate pricing and a 100% satisfaction guarantee. We hold a 4.8★ rating from 221+ Google reviews.
- Authorized for 30+ brands (Lennox, Carrier, Viessmann, Navien, Rheem & more)
- Upfront flat-rate pricing — no overtime or hidden fees
- Free, no-obligation estimates on new installations
- Locally owned & operated in Burnaby, BC
No Hidden Fees
Our service rates are transparent and easy to understand. You approve upfront, flat-rate pricing before we start — so you never get a bill you didn’t expect.
Licensed & Bonded
ROMA is a TSBC-licensed gas contractor (Gas LGA0202903). Our technicians are bonded, insured and Red Seal-trained — qualified for any heating or cooling system.
Free Estimates
We offer free, no-obligation estimates on new installations — furnaces, boilers, heat pumps, air conditioners, tankless and hot-water tanks.
ROMA Heating & Cooling is a trusted HVAC contractor serving Metro Vancouver since 1999. We specialize in furnace repair, heat pump installation, boiler services, air conditioning, and emergency heating solutions for residential, commercial, and government clients. Available for same-day and after-hours service, our certified technicians deliver fast, reliable, and affordable HVAC services across Greater Vancouver.
