Greater Vancouver’s Trusted HVAC Experts Since 1999 · 4.8★ (221 reviews)

Gas Fireplace Blower and Fan Kit Replacement in Greater Vancouver

TSBC-Licensed Gas Contractor · Gas LGA0202903Licensed, Bonded & InsuredServing Greater Vancouver since 19994.8★ (221 Google reviews)
Speak with a licensed ROMA technician todayCall (604) 704-0300Free Estimate
Quick answer: Gas fireplace blower and fan kit replacement in Greater Vancouver starts with confirming the blower, thermal switch or wiring is at fault, then fitting a correct blower or fan kit for your fireplace. ROMA’s licensed technicians test operation and safety afterward and quote in writing first. Call (604) 704-0300. TSBC-licensed, Gas LGA0202903. Call ROMA at (604) 704-0300 or book a free estimate.

The blower on a gas fireplace is what turns a pleasant flame into useful heat. It draws room air through the space around the firebox and pushes it back out warm, so a fireplace with a working fan heats a room far more evenly than one without. When the blower dies, gets loud or never came with the unit, owners across Greater Vancouver ask us about replacing it or adding a fan kit. ROMA Heating & Cooling handles blower and fan kit work in Vancouver, Burnaby, Richmond, Coquitlam, Surrey, Langley and the North Shore, and this page explains what is involved.

Blower work happens inside a gas appliance, so keep the safety basics in mind: if there is a gas smell, get out without touching switches and call FortisBC’s emergency line and 911 from outside. If the carbon monoxide alarm sounds or anyone feels unwell with headaches or nausea, leave and call 911.

How do you know the blower needs replacing?

Get a Quick Quote — Right Here

Fast response from a licensed ROMA technician — no obligation.









4.8★ from 221+ Google reviews · Licensed & insured · TSBC LGA0202903

Prefer to talk now? Call (604) 704-0300

What you noticePossible causeOften fixable without a new blower?
Fan never starts, even after the fireplace has been on a whileFailed motor, thermal switch, wiring or speed controlSometimes, if the switch or wiring is at fault
Fan hums but does not spinSeized motor or obstructionOccasionally, if it is only debris
Grinding, squealing or rattlingWorn bearings, loose housing, debrisLoose mounting or debris can be fixed; worn bearings usually mean replacement
Fan runs constantly, even when the fireplace is offThermal switch or control faultOften, by replacing the switch or control
Weak airflowDust and pet hair buildup, failing motorCleaning often helps
Fireplace never had a fanNo blower installedA fan kit may be available for the model

Can a fan kit be added to a fireplace that never had one?

Call a licensed ROMA gas technician — (604) 704-0300

Many gas fireplaces and inserts were designed with an optional blower kit, and if yours was, adding one can make a real difference to how warm the room feels. Some units were never designed for a fan, and forcing one in is not appropriate. We check the model on the rating plate, confirm whether a kit exists for it and whether the unit has the power supply and mounting points needed. If a kit is available, we quote it in writing.

Which blower should go in?

For most fireplaces, the best choice is the manufacturer’s blower or fan kit for that model, because it fits the mounting, matches the controls and moves the intended amount of air. For some older or discontinued units, a compatible blower can be suitable if it fits without modification, matches the electrical supply and controls, and keeps required clearances. We tell you which we plan to use before fitting it. Blowers on most designs move room air around the firebox, not combustion air, but correct fit still matters for performance and safety.

What does the replacement involve?

  1. We turn the fireplace off, let it cool and shut off gas and power to it.
  2. We remove the lower grille and access panels and, if needed, the glass to reach the blower compartment.
  3. We test the motor, thermal switch, speed control and wiring to confirm what has failed.
  4. With your approval of the written price, we remove the old blower and clean the compartment of dust and debris.
  5. We fit the new blower or fan kit, secure it, and connect wiring and the thermal switch correctly.
  6. We restore gas and power, relight, run the fireplace until the fan starts, check speed control, listen for noise and confirm the fan stops as it should.
  7. We leak-test any gas connection we disturbed and check the flame and venting before leaving.

Why does dust matter so much?

Blowers pull in whatever is in the room air: dust, lint and especially pet hair. Over time it coats the fan wheel and motor, reducing airflow and making the motor run hot, which shortens its life. A lot of noisy or weak blowers improve dramatically after cleaning. That is why cleaning the blower compartment is part of a yearly fireplace service.

Rather have a licensed pro handle it? Fast, honest help across Greater Vancouver.Call (604) 704-0300Free Estimate

Is a blower replacement worth it on an older fireplace?

Usually, if the fireplace is otherwise sound. A blower is a relatively contained repair compared with the value of the fireplace. If the fireplace itself has other significant problems, or parts for it are scarce, we will say so and you can decide whether to invest in the blower or plan a replacement. Our gas fireplace installation page covers replacement options.

How is blower work priced?

After diagnosis, the blower or kit, labour and testing are quoted as a flat rate in writing. If a model-specific kit must be ordered, we tell you the likely wait, and blower visits can be booked on weekends as well as weekdays.

Will a new blower change how the fireplace heats the room?

Noticeably, in most cases. Without a working fan, a gas fireplace heats mainly by radiation through the glass, so the area right in front gets warm while the far side of the room stays cool. A blower moves warm air out into the room, evening out the temperature and making better use of the gas you burn. Many blowers have variable speed; a lower setting keeps noise down in the evening, while a higher one spreads heat faster on a cold day. We show you how your controls work once the new blower is in, including how long it typically takes to start after the flame lights.

What can you do to keep the new blower quiet?

Vacuum the lower grille area gently every few weeks during the season, especially if you have pets, keep rugs and décor from blocking the intake, and book a yearly service so the compartment is cleaned properly. If the fan starts making new noises, mention it early rather than waiting for it to fail.

Who does the work?

ROMA’s licensed gas technicians. We have served Greater Vancouver since 1999, hold Technical Safety BC licence Gas LGA0202903, are bonded and insured, and have earned 4.8 stars from 221 Google reviews. We are not a dealer for any fireplace brand.

Tell us what you have — the brand, the model, and what it’s doing — and we’ll come back with the honest picture. Call (604) 704-0300 or book a blower or fan kit visit and send a photo of the rating plate.

Need a licensed gas technician in Greater Vancouver?

ROMA Heating & Cooling has served Metro Vancouver since 1999 — TSBC-licensed (Gas LGA0202903), bonded & insured, 4.8★ from 221 Google reviews. Upfront flat-rate pricing, free estimates on installs, 0% financing (OAC), no hidden fees, 7 days a week.

Call (604) 704-0300Get a Free Estimate

Frequently Asked Questions

Can a fan kit be added to my gas fireplace in Greater Vancouver?

If your fireplace or insert was designed with an optional blower kit, yes, and it can noticeably improve heat spread. Some units were never designed for a fan. We check the model on the rating plate, confirm a kit exists and that the power supply and mounting are suitable, then quote it in writing.

Why is my gas fireplace fan so loud?

Common causes are dust or pet hair on the fan wheel, a loose housing or worn motor bearings. Cleaning and tightening often quiet it. Worn bearings usually mean the blower needs replacing. A technician can identify which applies once the fireplace is cool and the compartment is opened.

Why does my fireplace fan keep running after the fireplace is off?

The fan is usually controlled by a thermal switch that turns it on when the firebox warms and off as it cools. It is normal for it to run a while after the flame goes out. If it never stops, the thermal switch or control may be faulty and should be tested.

Is it safe to replace a gas fireplace blower myself?

Blower replacement involves opening a gas appliance, working near the gas valve and wiring, and sometimes removing the glass. We recommend a licensed technician, who can confirm the fault, fit the correct blower and test the fireplace’s operation, gas connections and venting afterward.

Reviewed by the ROMA Heating & Cooling team — TSBC-licensed gas contractor (Gas LGA0202903), serving Greater Vancouver since 1999. Updated September 2026.

What Greater Vancouver Homeowners Say

4.8/5 from 221+ verified Google reviews

“Nelson worked hard to get the NTI unit fixed. He was always polite, courteous and on time.”

Chris Tipple · Verified Google review

“As always Nelson was super efficient. Showed up on time and was quick to work. I had a full maintenance done on the fireplaces and furnace. He was awesome. I won’t use anyone else.”

Tammy D · Verified Google review

“Excellent service. Andy had a spare Carrier inducer with him which saved us time.”

Steven E · Verified Google review

“Was very prompt to respond to our issues. Technician was scheduled for the day following my initial call.”

jason l · Verified Google review

“Very professional heating company. Price is reasonable, excellent work.”

Jessica Feng · Verified Google review

“Highly recommend this company. It was a pleasure dealing with Shawn and Nelson.”

Charlotte Stipp · Verified Google review

“Professional and courteous technicians with attention to detail and customer needs.”

Ted Laursen · Verified Google review

“Always great, friendly service. Serviced the hot water on-demand system. Honest and informative. Thanks!”

Wah Gee · Verified Google review

“Speedy response time, honest, and professional service from start to finish.”

Lauren McCaughey · Verified Google review

Read more reviews Call (604) 704-0300

Request Your Free Estimate

Fast response from a licensed ROMA technician — no obligation.









4.8★ from 221+ Google reviews · Licensed & insured · TSBC LGA0202903

Prefer to talk now? Call (604) 704-0300

Why Greater Vancouver Trusts ROMA Heating & Cooling

ROMA Heating & Cooling has installed, repaired and maintained heating and cooling systems across Metro Vancouver since 1999. Our team are TSBC-licensed gas fitters (Gas LGA0202903) and Red Seal-trained technicians — licensed, bonded and insured — and we back every job with upfront, flat-rate pricing and a 100% satisfaction guarantee. We hold a 4.8★ rating from 221+ Google reviews.

  • Authorized for 30+ brands (Lennox, Carrier, Viessmann, Navien, Rheem & more)
  • Upfront flat-rate pricing — no overtime or hidden fees
  • Free, no-obligation estimates on new installations
  • Locally owned & operated in Burnaby, BC

No Hidden Fees

Our service rates are transparent and easy to understand. You approve upfront, flat-rate pricing before we start — so you never get a bill you didn’t expect.

Licensed & Bonded

ROMA is a TSBC-licensed gas contractor (Gas LGA0202903). Our technicians are bonded, insured and Red Seal-trained — qualified for any heating or cooling system.

Free Estimates

We offer free, no-obligation estimates on new installations — furnaces, boilers, heat pumps, air conditioners, tankless and hot-water tanks.

Call Now Book Now
Emergency
Call NowFree Estimate
Scroll to Top