Enviro Gas Fireplace Igniter Replacement in Greater Vancouver
Without a functioning igniter, your Enviro gas fireplace cannot light its pilot — and without a stable pilot, the main burner will not fire. Igniter failure is one of the most common service calls ROMA Heating & Cooling receives for Enviro units across Greater Vancouver. Whether your Enviro uses a traditional millivolt spark system or a newer IPI electronic ignition, ROMA replaces the igniter with a genuine Enviro part and verifies full ignition system function before the job is done.
Types of Enviro Ignition Systems
Understanding which ignition system your Enviro unit uses helps explain why igniter replacement must be tailored to the model:
- Standing pilot with manual spark igniter — found on older Brite, Meridian, and Kodiak models. The igniter is a piezo spark device that generates a high-voltage spark when pressed or turned. Failure is usually mechanical wear of the piezo element or corrosion of the spark electrode tip.
- IPI (Intermittent Pilot Ignition) — used on newer E-Series, C-Series, and EX Series models. The pilot only lights when the fireplace is called to operate, extending igniter life. The ignition module generates an electronic spark sequence; failure presents as repeated clicking with no ignition, or a lockout error on the remote.
- EPI (Electronic Pilot Ignition) — a variant used on some newer Enviro models with full electronic controls. Diagnosis requires reading the control board’s fault status.
Common Causes of Enviro Igniter Failure in Metro Vancouver
| Igniter Component | Common Failure Mode | Typical Age at Failure |
|---|---|---|
| Spark electrode tip | Erosion or carbon buildup widening the gap | 5–10 years |
| Piezo spark module | Mechanical wear of the piezo element | 8–15 years |
| IPI electronic module | Component failure in the ignition circuit board | 10–18 years |
| Igniter lead wire | Insulation cracking from heat cycling | 10–20 years |
Symptoms of a Failing or Failed Enviro Igniter
- Clicking sound when pressing the igniter button but no visible spark at the pilot
- Visible spark but pilot does not light (may indicate a gas supply or thermocouple issue rather than the igniter)
- Igniter requires ten or more presses before the pilot catches
- No click at all when the igniter is activated (complete failure)
- On IPI models: control board shows a no-ignition or lockout status
ROMA’s Enviro Igniter Replacement Service
ROMA does not simply swap the igniter component in isolation. Our technicians perform a complete ignition system assessment to ensure the igniter is the actual fault — not a thermocouple, gas-valve, or gas-pressure issue that could persist after the igniter is replaced. The service includes:
- Igniter output test and electrode gap measurement
- Gas inlet pressure and pilot gas flow verification
- Thermocouple and thermopile output check (to rule out concurrent issues)
- Genuine Enviro igniter installation matched to the specific model
- Pilot and main burner ignition test — minimum three consecutive successful lights
- IPI module fault memory clear on electronic models
Genuine Enviro Igniter Parts
Aftermarket igniter electrodes and modules may fit physically but rarely match the spark energy, ceramic insulation rating, or electrode geometry of genuine Enviro components. ROMA sources OEM Enviro parts to ensure your repaired fireplace ignites reliably throughout the BC heating season — from the damp, cool falls on the North Shore to the frost periods in Surrey and Langley.
Book Igniter Replacement Across Greater Vancouver
ROMA Heating & Cooling serves all of Metro Vancouver from our Burnaby base. For Enviro gas fireplace igniter replacement, call (604) 704-0300 or email info@romaheating.ca. Gas-licensed, insured, and serving BC since 1999.
What Our Customers Say
“Very happy with service — he got my fireplace working very quickly and was very courteous and professional.”
Rather have a licensed pro handle it? Fast, honest help across Greater Vancouver.Call (604) 704-0300Free Estimate— Lara Fox, Google review (★★★★★)
“My fireplace had issues and I needed to service my furnace. Roma was on time and they were able to fix the issues. Very happy.”
— Sébastien Hebert, Google review (★★★★★)
Frequently Asked Questions
How do I know my Enviro fireplace igniter needs replacing?
If you hear clicking but no spark occurs at the pilot, if sparks are very weak or intermittent, or if the igniter requires many button presses before the pilot lights, the igniter electrode or module likely needs replacement.
Can I replace the Enviro igniter myself?
No. While the igniter component itself is not a gas-carrying part, replacing it requires accessing gas components and testing the pilot and gas valve system under BC gas code — work that must be performed by a gas-licensed technician.
Is a failed igniter dangerous?
A failed igniter prevents the pilot from lighting, so the fireplace will not operate. While not an immediate safety hazard, an igniter that works intermittently can cause gas to flow briefly without igniting — a reason to have it replaced promptly.
Does ROMA replace igniter modules on newer Enviro IPI systems?
Yes — ROMA replaces both traditional spark igniter electrodes on millivolt Enviro models and the IPI (Intermittent Pilot Ignition) modules and electrodes on newer E-Series and C-Series models.
How long does igniter replacement take?
Most Enviro igniter replacements are completed in a single visit of one to two hours, including pilot and burner functional testing before the technician leaves.
Related Guides & Services
- Gas Fireplace Repair
- Gas Fireplace Leak Detection
- Fireplace Maintenance & Service
- Emergency HVAC Repair
Call ROMA Heating & Cooling Today
For fast, professional diagnosis and repair anywhere in Greater Vancouver, call (604) 704-0300 or email info@romaheating.ca. prompt and after-hours service, gas-licensed and insured, serving the Lower Mainland since 1999.
What Greater Vancouver Homeowners Say
“Nelson worked hard to get the NTI unit fixed. He was always polite, courteous and on time.”
“As always Nelson was super efficient. Showed up on time and was quick to work. I had a full maintenance done on the fireplaces and furnace. He was awesome. I won’t use anyone else.”
“Excellent service. Andy had a spare Carrier inducer with him which saved us time.”
“Was very prompt to respond to our issues. Technician was scheduled for the day following my initial call.”
“Very professional heating company. Price is reasonable, excellent work.”
“Highly recommend this company. It was a pleasure dealing with Shawn and Nelson.”
“Professional and courteous technicians with attention to detail and customer needs.”
“Always great, friendly service. Serviced the hot water on-demand system. Honest and informative. Thanks!”
“Speedy response time, honest, and professional service from start to finish.”
Why Greater Vancouver Trusts ROMA Heating & Cooling
ROMA Heating & Cooling has installed, repaired and maintained heating and cooling systems across Metro Vancouver since 1999. Our team are TSBC-licensed gas fitters (Gas LGA0202903) and Red Seal-trained technicians — licensed, bonded and insured — and we back every job with upfront, flat-rate pricing and a 100% satisfaction guarantee. We hold a 4.8★ rating from 221+ Google reviews.
- Authorized for 30+ brands (Lennox, Carrier, Viessmann, Navien, Rheem & more)
- Upfront flat-rate pricing — no overtime or hidden fees
- Free, no-obligation estimates on new installations
- Locally owned & operated in Burnaby, BC
No Hidden Fees
Our service rates are transparent and easy to understand. You approve upfront, flat-rate pricing before we start — so you never get a bill you didn’t expect.
Licensed & Bonded
ROMA is a TSBC-licensed gas contractor (Gas LGA0202903). Our technicians are bonded, insured and Red Seal-trained — qualified for any heating or cooling system.
Free Estimates
We offer free, no-obligation estimates on new installations — furnaces, boilers, heat pumps, air conditioners, tankless and hot-water tanks.
ROMA Heating & Cooling is a trusted HVAC contractor serving Metro Vancouver since 1999. We specialize in furnace repair, heat pump installation, boiler services, air conditioning, and emergency heating solutions for residential, commercial, and government clients. Available for same-day and after-hours service, our certified technicians deliver fast, reliable, and affordable HVAC services across Greater Vancouver.

