Greater Vancouver’s Trusted HVAC Experts Since 1999 · 4.8★ (221 reviews)

Outdoor Coil Losing Heat During Changeover on a Dual Fuel System — the Read

TSBC-Licensed Gas Contractor · Gas LGA0202903Licensed, Bonded & InsuredServing Greater Vancouver since 19994.8★ (221 Google reviews)
Speak with a licensed ROMA technician todayCall (604) 704-0300Free Estimate
Quick answer: Heat loss during changeover on a dual fuel heat pump and gas furnace can trace to the outdoor coil: debris or leaves between fins, ice or frost handling issues, and coil damage all reduce the coil’s delivery at the changeover. ROMA Heating & Cooling (Gas LGA0202903) verifies fin condition, airflow and defrost behaviour across Greater Vancouver — call (604) 704-0300. Call ROMA at (604) 704-0300 or book a free estimate.

The changeover’s heat dip is the hybrid’s most noticed moment: the heat pump’s shift fades, the gas furnace‘s shift begins, and in the in-between the rooms feel the switch. On a dual fuel heat pump and gas furnace, the outdoor coil is the heat-exchange coil on the outdoor unit — the machine that absorbs the outside heat in heating mode. When the heat is lost during the changeover — the dip deeper or longer than the transition — the honest reads sit at the coil: debris or leaves between fins choking the coil’s absorption, ice and frost handling staging a deeper defrost right on the handover’s shoulder, or coil damage (a crushed fin, a bent section, a line-set dent) reducing the coil’s delivery just when the shift is being made. The one-detail the field knows: on a hybrid the changeover’s dip and the defrost’s dip both stack, and the tech separates them by reading the coil’s frost state at the changeover’s exact moment.

ROMA Heating & Cooling serves Greater Vancouver — licensed, TSBC-registered (Gas LGA0202903). Call (604) 704-0300 . Our heat pump service team reads the outdoor side; furnace repair reads the indoor handover.

What should the changeover feel like — and when is the dip the coil’s story?

Get a Quick Quote — Right Here

Fast response from a licensed ROMA technician — no obligation.









4.8★ from 221+ Google reviews · Licensed & insured · TSBC LGA0202903

Prefer to talk now? Call (604) 704-0300

A healthy changeover has a short transition: the heat pump’s call ends or fades, the furnace fires, and the rooms either keep their warmth or lose a fraction of a degree. The coil’s story is a deeper or longer dip — the rooms slide a degree or more, or the cold breath arrives at the registers right after the heat pump’s cycle ends. The honest reference: watch the outdoor coil as the changeover happens. If the coil is clean, frost-free and working, the shift is the shift. If the coil is loaded with leaves, sitting under a frost cover, or visibly damaged, the dip is its story — and the gas furnace’s arrival is doing cleanup, not follow-through.

What causes problems with the outdoor coil when a dual fuel heat pump and gas furnace loses heat during changeover?

Call a licensed ROMA gas technician — (604) 704-0300

Debris or leaves between fins: a Vancouver autumn packs the coil’s fins, reducing the absorption surface just when the changeover’s handover is happening — and the heat pump’s final shift misses. Ice or frost handling: a coil that goes into the changeover under a frost cover delivers less; the defrost’s timing and the changeover’s timing get to run into each other. Coil damage: a crushed fin section, a dented shell, a line-set squash — the coil’s ability to absorb is physically reduced, and the changeover’s dip deepens. The verify list: fin condition, airflow across the coil, and defrost behaviour — what the coil’s frost history actually looked like.

Why does the changeover’s dip get blamed on the gas furnace when the coil is the author?

Because the changeover’s dip is felt as a furnace failure: the furnace is blamed, though it usually fires when asked — the ask’s quality is the coil’s story, and the coil is the heat pump’s delivery instrument. The furnace usually fires when it was asked; the ask’s quality is the coil’s story. The one-detail: the double-dip signature — when a changeover lands on a defrost’s shoulder, the room gets two dips, and the honest read is the coil’s frost state at the changeover’s moment. A tech reads the outdoor coil’s cycle and the thermostat’s call together, whereas the story the owner tells is a furnace that’s slow to answer.

Rather have a licensed pro handle it? Fast, honest help across Greater Vancouver.Call (604) 704-0300Free Estimate
Changeover dip — the coil’s evidenceRead
Cold dip + coil finned with leavesAbsorption story — the coil chokes the shift
Dip + frost on the coil at the changeoverFrost handling — the defrost and the changeover collided
Dip + visible coil damagePhysical story — fin damage or line-set dent
Dip + clean coil, healthy frostConfiguration story — the changeover’s line or the thermostat’s call, not the coil

What does a technician verify — fin condition, airflow, defrost behaviour?

The coil’s portrait: fin condition (bent, corroded, clean? the fins are the absorption surface), airflow (a fan serving the coil or blocked), and defrost behaviour (how the coil’s frost history actually ran — regular, delayed, or colliding with the changeover). The chargers get their read too, because a coil performing poorly can be the sealed side — but the honest reads are the coil’s physical and frost ones first.

Should I switch to gas manually during the changeover times?

If the dip is regular, the furnace is functioning, and the house stays warm, book the read. If the dip is severe or the house loses ground, use the thermostat to shift the mode if it allows, and call. Gas rules: CO alarm working, gas smell — everyone out, FortisBC emergency + 911.

How does ROMA Heating & Cooling read a changeover dip honestly?

Coil first (fins, airflow, frost), sealed side second, changeover’s line third — because the honest order is cheap, then loud, then puzzling. Tell us what you have — the brand, the model, and what it’s doing — and we’ll come back with the honest picture. Call (604) 704-0300 or book online.

Need a licensed gas technician in Greater Vancouver?

ROMA Heating & Cooling has served Metro Vancouver since 1999 — TSBC-licensed (Gas LGA0202903), bonded & insured, 4.8★ from 221 Google reviews. Upfront flat-rate pricing, free estimates on installs, 0% financing (OAC), no hidden fees, 7 days a week.

Call (604) 704-0300Get a Free Estimate

Frequently Asked Questions

Is a short loss of heat during changeover normal?

A short, shallow dip is the transition’s own shape — the handover between two machines. A deep or repeated dip, or rooms that slide a degree or more, is the read’s honest cue: coil, frost or line story. The visit reads the related checks together, because this symptom rarely travels alone.

Why would leaves cause a changeover dip?

The outdoor coil absorbs outside air through its fins. Leaves, debris and fluff between the fins reduce the surface, so the heat pump’s delivery at the changeover — its final shift — misses. A fin clean clears the story. A technician verifies it at the system’s running condition and explains the next step.

Is the coil physically damaged a real reader?

Yes — a crushed fin section, a dented shell or a line-set squash is a physical reduction in the coil’s ability, and the changeover feels it. The visual and the charge read together answer whether the coil’s damage is cosmetic or a leak story.

What's the difference between a defrost dip and a changeover dip?

Defrost is the coil’s own frost clearing — a hard dip while the outdoor unit heats its coil. Changeover is the hand-over to gas. When the two collide, the dip pairs. A tech reads the frost state at the changeover’s moment to separate them.

Can I clean the outdoor coil fins myself?

The safest honest answer is a technician’s plan: the outdoor cabinet, the fins and the sealed circuit behind them are not homeowner territory. What you can do safely: keep plantings and debris away from the unit’s circulation. The part and the price are quoted after the read, never before the evidence is in.

Reviewed by the ROMA Heating & Cooling team — TSBC-licensed gas contractor (Gas LGA0202903), serving Greater Vancouver since 1999. Updated September 2026.

What Greater Vancouver Homeowners Say

4.8/5 from 221+ verified Google reviews

“Nelson worked hard to get the NTI unit fixed. He was always polite, courteous and on time.”

Chris Tipple · Verified Google review

“As always Nelson was super efficient. Showed up on time and was quick to work. I had a full maintenance done on the fireplaces and furnace. He was awesome. I won’t use anyone else.”

Tammy D · Verified Google review

“Excellent service. Andy had a spare Carrier inducer with him which saved us time.”

Steven E · Verified Google review

“Was very prompt to respond to our issues. Technician was scheduled for the day following my initial call.”

jason l · Verified Google review

“Very professional heating company. Price is reasonable, excellent work.”

Jessica Feng · Verified Google review

“Highly recommend this company. It was a pleasure dealing with Shawn and Nelson.”

Charlotte Stipp · Verified Google review

“Professional and courteous technicians with attention to detail and customer needs.”

Ted Laursen · Verified Google review

“Always great, friendly service. Serviced the hot water on-demand system. Honest and informative. Thanks!”

Wah Gee · Verified Google review

“Speedy response time, honest, and professional service from start to finish.”

Lauren McCaughey · Verified Google review

Read more reviews Call (604) 704-0300

Request Your Free Estimate

Fast response from a licensed ROMA technician — no obligation.









4.8★ from 221+ Google reviews · Licensed & insured · TSBC LGA0202903

Prefer to talk now? Call (604) 704-0300

Why Greater Vancouver Trusts ROMA Heating & Cooling

ROMA Heating & Cooling has installed, repaired and maintained heating and cooling systems across Metro Vancouver since 1999. Our team are TSBC-licensed gas fitters (Gas LGA0202903) and Red Seal-trained technicians — licensed, bonded and insured — and we back every job with upfront, flat-rate pricing and a 100% satisfaction guarantee. We hold a 4.8★ rating from 221+ Google reviews.

  • Authorized for 30+ brands (Lennox, Carrier, Viessmann, Navien, Rheem & more)
  • Upfront flat-rate pricing — no overtime or hidden fees
  • Free, no-obligation estimates on new installations
  • Locally owned & operated in Burnaby, BC

No Hidden Fees

Our service rates are transparent and easy to understand. You approve upfront, flat-rate pricing before we start — so you never get a bill you didn’t expect.

Licensed & Bonded

ROMA is a TSBC-licensed gas contractor (Gas LGA0202903). Our technicians are bonded, insured and Red Seal-trained — qualified for any heating or cooling system.

Free Estimates

We offer free, no-obligation estimates on new installations — furnaces, boilers, heat pumps, air conditioners, tankless and hot-water tanks.

Call Now Book Now
Emergency
Call NowFree Estimate
Scroll to Top