Quayside lines New Westminster’s riverfront: a row of residential towers and low-rises along the esplanade, with the Fraser sliding past and the SkyTrain bridge in view. Many suites and townhomes here have their own gas boiler or combi unit tucked into a closet, handling heat and hot water for the home. When one of these units reaches the end of its life, replacing it is less about the boiler and more about planning within the building. ROMA Heating & Cooling replaces in-suite boilers across Quayside, and the smoothest jobs are the ones that start early.
Here’s a realistic timeline, followed by what each stage involves.
What does a Quayside in-suite boiler replacement timeline look like?
| When | What happens | Who’s involved |
|---|---|---|
| A few weeks before | Survey of the unit, vent, gas line and condensate options; written quote | You and our estimator |
| Once the quote is accepted | Strata notice or approval request with licence, insurance and scope | Owner, property manager, council if needed |
| In the days leading up to the job | Gas permit applied for; elevator and loading bay booked | ROMA and building management |
| Install day | Old unit removed, new unit installed, tested and commissioned | ROMA crew, owner or delegate for access |
| After install | Walk-through, permit details handed over, registration help | You and the ROMA crew lead |
A like-for-like swap using the existing vent can move quickly. A change to the vent location adds a council approval step, which depends on your strata’s meeting schedule.
Is the boiler in your Quayside unit yours to replace?
Call a licensed ROMA gas technician — (604) 704-0300
Check your strata plan and bylaws first. In most buildings with in-suite gas equipment, the unit inside your home and the gas line serving it belong to the owner. Central plants, shared vent risers and common piping belong to the strata. If you’re not sure what you have, send us a photo of the unit and its rating plate and we’ll help you figure it out.
What does the survey cover?
We look at the existing boiler, its closet clearances and service access, the vent terminal or shared vent connection, the condensate drain, the gas line size and the electrical supply. We ask about your hot-water use and whether heating is by radiators, baseboard, fan coils or in-floor loops. From there, we recommend a replacement that suits both your home and the building’s venting arrangement.
In towers, venting usually decides the shortlist. The new unit must be approved for the existing vent type and length, or the strata must approve a change. We’d rather tell you there are only two suitable options than recommend something the building can’t accept.
What about the townhomes along the esplanade?
Ground-level townhomes often have a larger mechanical space and a direct exterior wall, which widens the choice of equipment. Many have in-floor heat on the ground floor and baseboard above, which needs mixing controls. They still fall under strata rules for exterior changes, so vent relocations need approval.
What happens on install day in a Quayside building?
- Check in with building staff; pad the elevator and protect the hallway and suite floors.
- Isolate, drain and disconnect the old unit, then take it out of the building.
- Bring up and mount the new unit; connect heating piping, gas, power, vent and condensate.
- Fill and purge the system; test every gas joint for leaks.
- Analyze combustion and run the unit through heating and hot-water cycles.
- Show you the controls, then clean the closet and hallway before leaving.
Most in-suite replacements are completed within a working day, including elevator time.
What if the old unit fails before the approvals come through?
Call us. If the existing boiler can be safely repaired to bridge the gap, we’ll do that and keep the replacement plan moving. If it can’t, we’ll talk with your property manager about the fastest route to an approved replacement, which is often a like-for-like unit that reuses the existing vent. Portable electric heaters, kept well clear of furniture and curtains, can take the edge off in the meantime; never use a gas oven or any open flame for heat.
Will neighbours be disturbed?
Some noise is unavoidable while the old unit comes off the wall and the new one goes up, but it’s short-lived. We keep to the building’s working hours, protect common areas, and take away all packaging and the old equipment before we leave, so hallways stay clear. Most neighbours barely notice we were there, which is exactly how strata councils like it.
Who pulls the permit, and is the work insured?
ROMA pulls the gas permit and does the work to code. We’re a TSBC-licensed gas contractor, licence Gas LGA0202903, bonded and insured, and we provide proof of insurance for your strata. We’ve worked across New Westminster and Metro Vancouver since 1999 and hold a 4.8-star Google rating from 221 reviews.
Safety in a condo: if you smell gas in your suite or the corridor, leave, avoid switches and call FortisBC’s emergency line and 911 once outside the building; a CO alarm or headaches and nausea mean get out, call 911, and let building management know.
How can Quayside owners keep an in-suite unit healthy until replacement?
Annual servicing keeps the heat exchanger clean, the condensate trap clear and the combustion checked. It also gives early warning of problems, so a replacement can be planned instead of rushed. Our maintenance plans cover in-suite units. When it’s time for a new one, book a Quayside suite survey. Estimates are free and every quote is flat-rate and written.
Is financing available for a condo boiler?
Yes, on approved credit. Some owners prefer to spread the cost, particularly when a replacement comes up unexpectedly alongside other strata expenses.
Tell us what you have — the brand, the model, and what it’s doing — and we’ll come back with the honest picture. Call (604) 704-0300 and ROMA will map out your Quayside boiler replacement from survey to handover.
Learn more about ROMA’s related services.
Need a licensed gas technician in Greater Vancouver?
ROMA Heating & Cooling has served Metro Vancouver since 1999 — TSBC-licensed (Gas LGA0202903), bonded & insured, 4.8★ from 221 Google reviews. Upfront flat-rate pricing, free estimates on installs, 0% financing (OAC), no hidden fees, 7 days a week.
Frequently Asked Questions
How far ahead should I plan an in-suite boiler replacement in a Quayside condo?
Start a few weeks before you’d like the work done, longer if your strata needs to approve a vent change. That leaves time for the survey, quote, strata notice or approval, elevator booking and permit. If your unit is failing, tell us; we’ll move as quickly as the building’s rules allow.
Does my Quayside building allow in-suite boiler replacements?
Most buildings with in-suite gas units allow owners to replace them, subject to bylaws on contractor access, working hours and any exterior changes. Your strata plan confirms whether the unit is yours. We provide licence, insurance and scope documents so your property manager can approve the work.
Can the new boiler use the same vent in my Quayside suite?
Often it can, if the replacement is approved for that vent type and configuration. Some buildings use specific terminals or shared vent systems. We check the existing setup and the replacement’s requirements before quoting and avoid recommending a unit the building can’t accept.
Are Quayside townhomes on the esplanade different from tower suites?
Ground-level townhomes often have more mechanical space and a direct exterior wall, which can widen the choice of equipment. They’re still governed by strata bylaws for exterior changes. Tower suites usually have compact closets and fixed vent arrangements, so the choice is narrower.
Reviewed by the ROMA Heating & Cooling team — TSBC-licensed gas contractor (Gas LGA0202903), serving Greater Vancouver since 1999. Updated September 2026.
What Greater Vancouver Homeowners Say
“Nelson worked hard to get the NTI unit fixed. He was always polite, courteous and on time.”
“As always Nelson was super efficient. Showed up on time and was quick to work. I had a full maintenance done on the fireplaces and furnace. He was awesome. I won’t use anyone else.”
“Excellent service. Andy had a spare Carrier inducer with him which saved us time.”
“Was very prompt to respond to our issues. Technician was scheduled for the day following my initial call.”
“Very professional heating company. Price is reasonable, excellent work.”
“Highly recommend this company. It was a pleasure dealing with Shawn and Nelson.”
“Professional and courteous technicians with attention to detail and customer needs.”
“Always great, friendly service. Serviced the hot water on-demand system. Honest and informative. Thanks!”
“Speedy response time, honest, and professional service from start to finish.”
Why Greater Vancouver Trusts ROMA Heating & Cooling
ROMA Heating & Cooling has installed, repaired and maintained heating and cooling systems across Metro Vancouver since 1999. Our team are TSBC-licensed gas fitters (Gas LGA0202903) and Red Seal-trained technicians — licensed, bonded and insured — and we back every job with upfront, flat-rate pricing and a 100% satisfaction guarantee. We hold a 4.8★ rating from 221+ Google reviews.
- Authorized for 30+ brands (Lennox, Carrier, Viessmann, Navien, Rheem & more)
- Upfront flat-rate pricing — no overtime or hidden fees
- Free, no-obligation estimates on new installations
- Locally owned & operated in Burnaby, BC
No Hidden Fees
Our service rates are transparent and easy to understand. You approve upfront, flat-rate pricing before we start — so you never get a bill you didn’t expect.
Licensed & Bonded
ROMA is a TSBC-licensed gas contractor (Gas LGA0202903). Our technicians are bonded, insured and Red Seal-trained — qualified for any heating or cooling system.
Free Estimates
We offer free, no-obligation estimates on new installations — furnaces, boilers, heat pumps, air conditioners, tankless and hot-water tanks.
