You’ve got two furnace quotes on the kitchen table, one of them is a Lennox, and you’ve spent an evening reading reviews that range from “quietest furnace we’ve ever owned” to “never again.” Both can be true. ROMA Heating & Cooling has installed, serviced and repaired gas furnaces from most major manufacturers across Greater Vancouver since 1999, Lennox included, and we aren’t tied to any one brand. This page reads Lennox furnace reviews the way a technician does: which complaints are about the equipment, which are about the installer, how two-stage Lennox furnaces really behave in a Lower Mainland winter, and how to decide whether a Lennox suits your home.
What do Lennox furnace reviews actually tell you?
Lennox furnace reviews mostly tell you about comfort, noise and repair experiences — and much of what owners praise or blame comes down to how the furnace was sized, ducted and set up, not the brand badge. Read them for patterns, such as parts availability and control complaints, rather than for star ratings.
When we read through owner reviews, the comments fall into a few groups:
- Comfort and quiet. Owners of Lennox two-stage and modulating furnaces often describe steadier temperatures and quieter operation, which matches what we see when those furnaces are paired with properly sized ductwork.
- Parts and repairs. A recurring complaint is that some Lennox parts are specific to the brand and come through Lennox’s own supply channels, so a repair can mean waiting for a part rather than grabbing a universal one off the shelf.
- Controls. Lennox’s higher-end furnaces can use communicating controls that work best with matching Lennox thermostats. Owners who love the features tend to rate highly; owners who had a control fault often rate low.
- Installation problems blamed on the brand. Noisy ducts, short cycling, condensate leaks and cold rooms show up in reviews of every manufacturer, and in our experience they’re usually installation issues.
The honest takeaway: a Lennox furnace installed carefully tends to earn good reviews, and a poorly installed one of any brand earns bad ones.
How do Lennox furnace reviews in Canada differ from American reviews?
Call ROMA Heating & Cooling — (604) 704-0300
Lennox furnace reviews in Canada lean more on cold-weather reliability, parts access north of the border, and long heating seasons. Canadian efficiency rules also mean new gas furnaces sold here are condensing models, so Canadian reviews talk more about condensate drains and side-wall venting than many American reviews do.
That matters when you read an American review praising a mid-efficiency model that simply isn’t an option for a new installation here. It also matters for parts: availability in Canada can differ from the US, and in our experience a part that’s next-day in one market can take longer in another. In Metro Vancouver specifically, our winters are long and damp rather than brutally cold, so a furnace here spends many hours on low fire. That’s one reason two-stage and modulating furnaces — Lennox or otherwise — tend to suit local homes well: they spend most of the season running gently instead of blasting on and off.
What do owners say in Lennox two-stage furnace reviews?
In Lennox two-stage furnace reviews, owners usually praise quieter starts, more even room temperatures and fewer drafty blasts of hot air, because the furnace runs on its low stage most of the time and only steps up on cold mornings. The complaints are usually about longer run times being mistaken for a problem, or thermostat setup.
A two-stage furnace has two heat levels. On a mild Vancouver day it runs on low for longer, quieter cycles; on a frosty morning it switches to high to catch up. Owners coming from an old single-stage furnace are sometimes surprised that the new one “never shuts off” — that’s normal, and it’s how a two-stage furnace delivers more even heat. Where we do see real trouble:
- A thermostat that isn’t set up for two-stage operation, so the furnace jumps to high fire too often.
- Undersized or leaky ducts that make the higher blower speeds noisy.
- Condensate drains routed poorly, which can trip the furnace off in the coldest weeks.
Fix those, and two-stage reviews from our customers tend to be very positive, regardless of the brand on the cabinet.
Which Lennox furnace type fits which Greater Vancouver home?
For most Greater Vancouver homes, a two-stage Lennox furnace with a variable-speed blower is the sweet spot; a single-stage model suits small, simple homes on a budget, and a modulating model suits larger or multi-level homes where comfort and quiet matter most. Ductwork condition should drive the choice as much as the furnace tier.
Lennox groups its residential furnaces into tiers — its premium Signature Collection, the mid-range Elite line and the entry-level Merit line — and within those, furnaces differ mainly in how finely they control the flame and the blower. Here’s how we’d match furnace types to local homes:
| Home | Furnace type that usually fits | Why | What to check first |
|---|---|---|---|
| Compact bungalow or townhouse, simple layout | Single-stage or basic two-stage | Small heat demand, short duct runs | Filter access, condensate drain route |
| 1970s split-level or rancher in Burnaby or Coquitlam | Two-stage with variable-speed blower | Evens out hot and cold levels | Duct leaks, return-air size |
| Larger two-storey home in Surrey or Langley | Two-stage or modulating | Long runs and upstairs heat build-up | Zoning options, upstairs returns |
| Older Vancouver character home with retrofitted ducts | Modulating, if the ducts allow | Gentle airflow suits small, older ducts | Duct condition, venting path |
| Home planning a heat pump add-on | Two-stage or modulating with a compatible control | Works as backup heat in a dual-fuel setup | Thermostat and control compatibility |
What do our technicians check on a Lennox furnace?
On a Lennox furnace, our technicians check the same essentials as any gas furnace — burners, igniter, flame sensor, heat exchanger, venting, condensate system, blower and safety switches — plus the control setup, because communicating Lennox systems need the furnace, thermostat and any outdoor unit configured to work together.
Our Lennox-specific checklist on a service or diagnostic visit:
- Confirm whether the furnace is running on a communicating control or a conventional thermostat, and that the configuration matches what’s installed.
- Read the furnace’s diagnostic indicator and stored fault history where available — we treat any code as a lead to verify against the manufacturer’s documentation, not a final answer.
- Inspect the condensate trap, drain hoses and pressure switch tubing, which are frequent causes of lock-outs on condensing furnaces.
- Check that the two-stage or modulating operation actually steps between levels during a run test.
- Note the rating plate details so any part we need can be ordered correctly the first time.
When something has failed, our furnace repair technicians explain the fix and, if a brand-specific part is needed, tell you upfront what that means for timing.
Should you repair or replace an older Lennox furnace?
Repair an older Lennox furnace when the problem is a wear item — igniter, flame sensor, inducer motor, pressure switch — and the heat exchanger and cabinet are sound. Replace it when the heat exchanger is cracked, the control board has failed on an ageing unit, or you’re paying for repeated repairs winter after winter.
Our decision rule for owners: if the furnace is reliable, the repair is modest compared with the furnace’s remaining life, and parts are available, repair it. If two of these are true — the furnace is getting old, it needs a major component, and parts are slow — start comparing replacement quotes. Replacement isn’t automatically another Lennox; we’ll give you an honest comparison of the furnaces we install and what fits your ducts, your venting and your budget. Our heating installation estimates are free, and financing is available on approved credit (OAC).
Do permits and Technical Safety BC rules apply to a Lennox furnace install?
Yes. Any new gas furnace in BC, Lennox or otherwise, must be installed by a licensed gas contractor under a permit — through Technical Safety BC in most municipalities, or the City of Vancouver inside city limits. ROMA is a TSBC-licensed gas contractor, Gas LGA0202903, and we take out the permits our installations require.
Permits matter beyond the paperwork. Manufacturer warranty coverage typically depends on professional installation and registration, and a properly permitted install is easier to explain when you sell the house. In strata townhouses, check with your council before replacing a furnace: some bylaws govern vent termination locations on exterior walls, and the strata may want notice before trades arrive. A side-wall vent that’s too close to a neighbour’s window or a walkway is a common reason replacements need rethinking.
How does ROMA help you choose between Lennox and other furnaces?
ROMA helps you choose by looking at your house first: we measure up the home, inspect the ducts and venting, ask how you actually use each room, and then recommend furnace types that fit. We’ll quote more than one option in writing when it helps, and explain the trade-offs between brands in plain language.
Some owners settle on Lennox for quiet operation and advanced controls; others prefer a brand with more widely available parts. Either way, the installation is what decides how the furnace performs for the next fifteen-plus winters. After the install, a yearly maintenance visit keeps the condensate system, burners and controls in good shape and keeps a service record for warranty purposes.
Safety first: if you ever smell gas near any furnace, get everyone out, leave switches alone, and call FortisBC’s emergency line and 911 once you’re outside. If a carbon monoxide alarm goes off or people in the house feel headachy or nauseous, get out and call 911.
We install and service gas furnaces across Vancouver, Burnaby, New Westminster, Richmond, Surrey, Delta, Coquitlam, Port Coquitlam, Port Moody, North Vancouver, West Vancouver, Langley and Maple Ridge. If you have a Lennox quote or an existing Lennox furnace, email a photo of the rating plate to info@romaheating.ca and we’ll tell you what we see.
Tell us what you have — the brand, the model, and what it’s doing — and we’ll come back with the honest picture. Call (604) 704-0300 or book a furnace consultation online and we’ll arrange a visit.
Need a licensed gas technician in Greater Vancouver?
ROMA Heating & Cooling has served Metro Vancouver since 1999 — TSBC-licensed (Gas LGA0202903), bonded & insured, 4.8★ from 221 Google reviews. Upfront flat-rate pricing with a written quote, free estimates on installs, financing available (OAC), 7 days a week. For exact pricing call us or email info@romaheating.ca.
Frequently Asked Questions
Are Lennox furnaces a good choice for Vancouver's damp winters?
They can be. Vancouver winters are long and mild rather than extreme, so a furnace spends many hours on low fire. Lennox two-stage and modulating furnaces handle that well, running gently for longer cycles. What matters more is correct sizing, sound ductwork and a well-routed condensate drain. We’ll look at your home and tell you honestly whether a Lennox or another furnace suits it better.
Why do some Lennox furnace reviews in Canada mention slow repairs?
In our experience, some Lennox parts are brand-specific and travel through the manufacturer’s own supply channels, so a repair can mean waiting for a part rather than using a universal one. That’s not always the case, and it varies by component. When we diagnose a Lennox furnace, we tell you upfront if the part is brand-specific and what that means for timing.
Is a Lennox two-stage furnace worth it over single-stage in a Burnaby home?
For most Burnaby homes, yes. A two-stage furnace runs on its low setting most of the season, giving steadier temperatures, quieter operation and fewer blasts of hot air. Split-level and older homes with uneven rooms benefit most. A small, simple townhouse may not notice as much difference. Thermostat setup and duct condition decide how much of the benefit you actually feel.
Does ROMA service Lennox furnaces that another company installed?
Yes. We service and repair Lennox furnaces regardless of who installed them, and we’re not tied to any manufacturer. On the first visit we review how the furnace was installed, including venting, condensate routing and control setup, because those details often explain the problems owners notice. If the setup has issues, we explain them plainly and quote any corrections in writing before doing the work.
Can a Lennox furnace work with a heat pump in Greater Vancouver?
It can, in a dual-fuel setup where the heat pump handles most heating and the gas furnace takes over in colder weather. The key is control compatibility — some Lennox furnaces use communicating controls that pair best with matching equipment and thermostats. We check what you have and recommend a combination that works together rather than fighting each other.
Reviewed by the ROMA Heating & Cooling team — TSBC-licensed gas contractor (Gas LGA0202903), serving Greater Vancouver since 1999. Updated November 2026.
Which Lennox furnace is the best pick for a Greater Vancouver home?
For most detached houses we would shortlist the EL297V: two-stage heat, a variable speed direct drive blower and 97% AFUE. Pick the SLP99V if you want modulating comfort and the longest parts coverage. Smaller ranchers and townhouses often do well on the EL296V or ML196E, and the 80% lines rarely suit a BC replacement.
Most Lennox calls we take start the same way: the old furnace roars on and off, the upstairs bedrooms never quite warm up, and a quote has arrived with three model codes nobody explained. Below, every current Lennox gas furnace line sits side by side using only what Lennox itself publishes, so you can read that quote with the same data we use.
How do the Lennox furnace lines compare on the published specs?
Lennox groups its gas furnaces into the Dave Lennox Signature Collection, Elite and Merit. The table lists every line we could source on lennox.com with AFUE, heat staging, blower type and both warranty terms. Where Lennox publishes nothing for a line, the cell shows a dash rather than our guess.
| Line | Collection | AFUE | Heat staging | Variable-speed blower | ENERGY STAR | Parts (covered components) | Heat exchanger |
|---|---|---|---|---|---|---|---|
| SLP99V | Signature | up to 99% | variable capacity (modulating), increments as small as 1% | yes, direct drive | yes | 10 years | limited lifetime, original owner; 20 years subsequent owners |
| SL280V | Signature | up to 80% | variable-speed (per Lennox listing) | — | no | 10 years | 20 years |
| EL297V | Elite | 97% | two-stage | yes, direct drive | yes | 5 years | limited lifetime, original owner; 20 years subsequent owners |
| EL296V | Elite | up to 96% | two-stage | yes | yes | 5 years; 10-year extended with registration | limited lifetime, original owner; 20 years subsequent owners |
| EL296E | Elite | up to 96% | two-stage | no (Power Saver motor) | yes | 5 years | limited lifetime, original owner; 20 years subsequent owners |
| EL196E | Elite | up to 96% | single-stage | no (Power Saver motor) | yes | 5 years | limited lifetime, original owner; 20 years subsequent owners |
| ML196E | Merit | up to 96% | single-stage | no (constant-torque motor) | yes | 5 years; 10-year extended with registration | 20-year limited |
| ML180E | Merit | up to 80% | single-stage | no (constant torque) | no | 5 years; 10-year extended with registration | 20-year limited |
Only two lines publish an input range on the pages we read: the SLP99V at 66,000 to 132,000 Btuh, and the EL297V at 44,000 to 132,000 Btuh on high fire with a low fire of 29,000 to 86,000 Btuh. One flag on the ML196E: its current product page says up to 96% AFUE, while a Lennox commercial wall chart lists up to 93%, so specifications vary by document and the exact model number decides. Lennox markets the SLP99V as its quietest furnace but publishes no sound figure for it.
What do those numbers mean in a wet, mild Lower Mainland winter?
Here, staging and blower type usually matter more than the final AFUE point. Our heating season is long, damp and mostly mild, broken by the odd cold snap, so a furnace spends most of its hours well below full output. Two-stage and modulating lines with a variable-speed blower handle those hours with longer, quieter, gentler cycles.
A single-stage furnace has one setting, so on a drizzly fall evening it fires hard, overshoots, shuts off and repeats. In many two-storey homes we open up, that pattern is exactly why the main floor feels stuffy while the bedrooms stay cool. During a real cold snap every line runs at full fire, which is why correct sizing matters more than the badge.
Venting is the other local decider. Every 96%-plus Lennox line is a condensing furnace, typically vented through plastic pipe out a side wall with a condensate drain. In townhouses and strata units, clearances from windows, doors and neighbouring openings, plus strata council approval for a new wall penetration, can rule a line in or out before efficiency enters the picture. Metro Vancouver’s soft water is a boiler and water-heater topic, not a furnace one; the water we watch on a furnace is condensate, routed so it cannot freeze in a garage or crawlspace.
The SL280V and ML180E are non-condensing. Canada’s federal efficiency rules for residential gas furnaces generally keep non-condensing models out of BC home replacements, so we would confirm by exact model before ever quoting one.
How do the Lennox warranty terms differ from line to line?
The two Signature lines carry 10 years on covered components; every Elite and Merit line carries 5 years, and the EL296V, ML196E and ML180E add a 10-year extended limited warranty with product registration. Heat exchanger cover is limited lifetime for the original owner on the SLP99V and all Elite lines, and 20 years on Merit and the SL280V.
Details buyers miss: on the lifetime lines, subsequent owners get 20 years on the heat exchanger, which matters if you might sell. Eligible Signature models also offer a choice: a default 2-year parts-only extension (12 years parts-only in total) or 3 years of labour (10 years parts plus 3 years labour). The Lennox Basic Limited Warranty states it applies in the U.S.A. and Canada. Registration is your step, so we put the model and serial numbers on your paperwork. A long warranty is not proof of durability, though; installation quality, airflow and annual service decide how long a furnace actually lasts.
Where do the S40 and iComfort E30 thermostats fit in?
The S40 is the communicating controller for Lennox Communicating Products, talking over the RSBus serial bus on standard unshielded thermostat wire. The iComfort E30 targets non-communicating systems. If a heat pump is part of your plan, the thermostat you choose decides how dual-fuel switching between gas and electric heat will work.
With the optional Equipment Interface Module (EIM 22X18), the S40 runs most 24VAC furnaces, air conditioners and heat pumps, up to 3 stages of heat and 2 stages of cooling, but it will not work with other brands’ communicating equipment. Dual fuel with a non-communicating heat pump needs that EIM. Lennox Smart Zoning covers up to 4 zones, limited to two equal-load zones with single-stage outdoor units. The E30 handles dual fuel only with a Lennox communicating heat pump, using two balance points, on 4-wire standard thermostat wiring.
Which Lennox line suits which kind of home?
Match the line to the house, not to the badge. Larger, older or two-storey homes gain most from the SLP99V or EL297V; well-ducted ranchers and many townhouses do well on the EL296V or EL296E; and a straightforward swap where comfort complaints are minor can suit the EL196E or ML196E.
- Two-storey house with uneven floors: SLP99V or EL297V, for long low-fire runs and a variable-speed blower.
- Rancher or split-level with decent ducts: EL296V if you want the quieter blower, EL296E if you do not.
- Townhouse or strata unit: the vent route decides first; then we check the smallest input on the exact model against the heat loss.
- Heat pump planned in the next few years: choose the thermostat path (S40 with EIM, or E30) now.
- Selling soon: compare the subsequent-owner heat exchanger terms in the table.
How does ROMA decide which Lennox model to quote?
We start with a room-by-room heat-loss calculation, then check duct sizing, the vent route, gas line capacity and, if a heat pump is coming, the electrical panel. The model that fits those findings goes on an upfront flat-rate written quote with its exact model number, so you can check every line against Lennox’s spec sheet.
Our technicians also look at where condensate can drain, whether the existing chimney needs lining or capping once the old furnace leaves, and what your strata or municipality needs before work starts. ROMA has served Metro Vancouver since 1999 as a Technical Safety BC licensed gas contractor (Gas LGA0202903), bonded and insured, working 7 days a week from our Burnaby office. Read more about heating installation or furnace repair, then book a free installation estimate, call (604) 704-0300 or email info@romaheating.ca.
Safety first: if you smell gas, get everyone out, touch no switches, and call FortisBC’s emergency line and 911 from outside; if a CO alarm sounds or anyone has a headache or nausea, get out and call 911.
Sources
- Lennox manufacturer product, warranty and engineering pages (lennox.com), retrieved November 2026.
- Specifications change; confirm the current model’s rating plate and spec sheet before you buy.
More questions we hear about this
Is the Lennox SLP99V worth it over the EL297V in Vancouver?
It depends on how uneven your house feels. The SLP99V modulates in increments as small as 1% and carries 10 years on covered components, while the EL297V is two-stage with 5 years parts. Both have a variable speed direct drive blower. In a mild, damp climate, the EL297V already delivers most of the comfort gain; the SLP99V suits larger or harder-to-balance homes.
Can I still get a Lennox 80% furnace installed in BC?
Lennox lists the ML180E and SL280V at up to 80% AFUE. Canada's federal efficiency rules for residential gas furnaces generally keep non-condensing models out of home replacements here, so we treat them as unlikely options and confirm by exact model before quoting. For most BC homes the realistic Lennox choices are the 96%-plus condensing lines.
Why does the ML196E show two different AFUE ratings?
Lennox's current ML196E product page lists up to 96% AFUE, while a Lennox commercial wall chart shows up to 93%. Specifications vary by document and by exact model number, so check the rating plate and the spec sheet for the specific model on your quote. We list the full model number on every written quote so you can do that check yourself.
Will a Lennox S40 thermostat run my existing furnace?
With the optional Equipment Interface Module (EIM 22X18), Lennox says the S40 works with most 24VAC furnaces, air conditioners and heat pumps, up to 3 stages of heat and 2 stages of cooling. It will not work with other brands' communicating equipment. Our technicians check your furnace's control board and wiring before recommending it.
What Greater Vancouver Homeowners Say
“Nelson worked hard to get the NTI unit fixed. He was always polite, courteous and on time.”
“As always Nelson was super efficient. Showed up on time and was quick to work. I had a full maintenance done on the fireplaces and furnace. He was awesome. I won’t use anyone else.”
“Excellent service. Andy had a spare Carrier inducer with him which saved us time.”
“Was very prompt to respond to our issues. Technician was scheduled for the day following my initial call.”
“Very professional heating company. Price is reasonable, excellent work.”
“Highly recommend this company. It was a pleasure dealing with Shawn and Nelson.”
“Professional and courteous technicians with attention to detail and customer needs.”
“Always great, friendly service. Serviced the hot water on-demand system. Honest and informative. Thanks!”
“Speedy response time, honest, and professional service from start to finish.”
Why Greater Vancouver Trusts ROMA Heating & Cooling
ROMA Heating & Cooling has installed, repaired and maintained heating and cooling systems across Metro Vancouver since 1999. Our team are TSBC-licensed gas fitters (Gas LGA0202903) and Red Seal-trained technicians — licensed, bonded and insured — and we back every job with upfront, flat-rate pricing and a 100% satisfaction guarantee. We hold a 4.8★ rating from 221+ Google reviews.
- Authorized for 30+ brands (Lennox, Carrier, Viessmann, Navien, Rheem & more)
- Upfront flat-rate pricing — no overtime or hidden fees
- Free, no-obligation estimates on new installations
- Locally owned & operated in Burnaby, BC
No Hidden Fees
Our service rates are transparent and easy to understand. You approve upfront, flat-rate pricing before we start — so you never get a bill you didn’t expect.
Licensed & Bonded
ROMA is a TSBC-licensed gas contractor (Gas LGA0202903). Our technicians are bonded, insured and Red Seal-trained — qualified for any heating or cooling system.
Free Estimates
We offer free, no-obligation estimates on new installations — furnaces, boilers, heat pumps, air conditioners, tankless and hot-water tanks.
